Top Flash Hot Shoe Reviews

Anwenk Camera Flash Stand Flash Speedlight Hot Shoe Mount Stand with 1/4\ Metal Tripod Thread for Flash Speedlight Speedlite, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax 4 Pack

Universal Camera Hot Shoe Flash Stand for dslr camera, Compatible with Canon Nikon Sigma Olympus Panasonic Pentax Nissin Sunpak etc Flash, Speedlight (not for Sony)..
With 1/4" Metal Tripod Thread on the bottom for mounting on a tripod or light stand.(Tripod/Light stand is not included)..
A locking hole on the hot shoe flash stand perfectly matches the locking pin to allow the Speedlight to lock on the light stand..
Dimensions: 95 x 63 x 12mm (3.7" x 2.5" x 0.5").
Package includes 4pcs of camera hot shoe flash stands.Tip: If you will need it to support your flash at an angle, we suggest you can choose our metal cold shoe mount for angled position for better protection- Search"B07MZJRTH4" or "B076FTW8YG"..

Check Stock

Updated Anwenk Flash Cold Shoe Mount Adapter Flash Shoe Mount Flash Stand Adapter with 1/4\-20 Tripod Screw Thread for Camera Flash Nikon Canon Olympus Panasonic Speedlite Flash, 2Pack

Updated Cold Shoe Flash Stand Adapter. Work on monitor,ring light,Nikon Canon speedlite flash,trigger,magic arm,mic and any accessories that has a camera type of shoe..
Updated: NO SPRING. Never have to worry about the springs falling out again. That makes your expensive flash be held tightly and safely not by the springs lock, but your hot shoe locking wheel.(Your accessories should have hot shoe locking wheel in order to lock down to this cold shoe mount)..
Universal 1/4" Tripod Screw -Metal cold shoe to mount your flash onto bracket or tripod/light stand..
Smart Design - With a stop screw on the shoe mount adapter to prevent shoe mount accessories from accidentally sliding forward and keep your accessories silde Perfectly in right place..
Material: Metal construction with black anodized for higher durability..

Check Stock

Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong and Solid (Update)

Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
Comes with 1/4"-1/4" male to male screw for your varied configuration..
Package Includes 1x flash hot shoe mount adapter( Updated).
1x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..

Check Stock

2Pack Flash Hot Shoe Mount Adapter to 1/4 Thread Hole with 1/4\-20 Male to 1/4\-20 Male Tripod Screw Adapter for Flash Holder Bracket Light Stands Umbrella Holder Flash Bracket,Strong &Solid (Update)

Flash hot shoe to 1/4" thread (Updated Solid Metal Connection Base), Support Canon Nikon Pentax Olympus Metz Sigma Nissin Speedlite.Note: May Not Work for Sony Flash..
1/4" brass nut in the bottom,work for light stands/ flash holders with 1/4" screw head..
Designed with cold foot, Standard hot shoe support most flash, applicable to Canon Nikon Pentax Olympus Metz Sigma Nissin Flashes.
Comes with 1/4"-1/4" male to male screw for your varied configuration..
Package Includes 2x flash hot shoe mount adapter( Updated).
2x 1/4"-1/4" screw. 100% Money Back..Note: Camera, flash , umbrella holder and tripod are not included..

Check Stock

QYXINC Camera Hot Shoe Mount Adapter Flash Shoe Mount to 1/4\ Tripod Screw Adapter 2Piece, Metal Cold Shoe Flash Stand Adapter with 1/4-inch -20 Tripod Screw 2Piece

Flash hot shoe mount with 1/4"-20 tripod screw adapter, fit on anything else that has a 1/4"-20 thread hole(such as microphone, LED light, monitor, camcorder or digital camera)..
Metal cold shoe with 1/4"-20 threaded hole is suitable for the 1/4" thread tripod or light stand. Work with Canon/ Pentax/Nikon speedlite flash, trigger, monitor and any accessories that has a Universal camera shoe..
Easy to use. Hot shoe and Cold shoe combo pack.
High quality Aluminum Alloy, sturdy and durable..
Package Includes 2x Hot shoe mount adapter003cbr003e 2x Cold shoe mount adaper.

Check Stock

Neewer Two(2) Pack of Durable Pro 1/4\ Mount Adapter for Tripod Screw to Flash Hot Shoe

This adapter permits the devices with standard 1/4" screw hole to be installed on flash hot shoe slot. It includes 2 nuts which can be adjusted..
It can install NIKON SC-28 Flash Sync Cord to VH2000 Camera Flash Bracket Grip. It can install YONGNUO CTR-301P Flash Remote Trigger to Flash Shoe Umbrella Holder Stand Bracket..
2 pack of 1/4" tripod screw to flash shoe mount adapter.

Check Stock

JINTU Dual Hot Shoe Flash Speedlite Bracket Stand Umbrella Holder Adapter with 1/4' 3/8' Screw Mount for Canon Nikon Yongnuo Godox Flash Speedlite Video Camera Camcorder

- Dual hot shoes adapter, universal for flash with standard hot shoe mount..
- Standard 1/4 inch screw can connect many flash lights directly, which is convenient for photographers to use the flash to make multi-directional fill light when shooting outside..
- Built in umbrella socket, and the angle of the flash can be adjusted 180 degrees, perfect for holding your photo umbrella..
- Universal cold shoe mount compatible with Canon, Nikon etc most DSLR cameras and other flashes with standard shoe mount or video LED light, studio light..
- Aluminium alloy made, sturdy and durable..

Check Stock

Neewer 16 Channel Wireless Remote FM Flash Speedlite Radio Trigger with 2.5mm PC Receiver for Flash Units with Universal Hot Shoe

This flash trigger device is control discreteness for camera to trigger hot shoe flashgun synchronously. It's made up of two parts named signal transmitter and receiver. Work through wireless wireless remote signal controlling.
The transmitter is consisting of advanced designed circuit and component,and works through sending encoded signal. It comes with 2.5mm sync port,which permits the camera without hot shoe using this flash trigger.
This flash trigger can work with all camera with stand hot shoe mount and those cameras with 2.5mm mm port.(but not work with Sony flashes).
Very low voltage working make sure that high level of safety and no damage to camera.
It is very useful when you want to trigger 2 flashes at one time.

Check Stock

Neewer TT560 Speedlite Flash Kit for Canon Nikon Sony Pentax DSLR Camera with Standard Hot Shoe，Includes 1 TT560 Flash 1 Flash Diffuser 1 Remote Control

Neewer Professional Speedlite Flash is compatible with all cameras with a standard hot shoe mount. Powerful Manual Flash with High Guide No.....
Features a built-in flip down wide angle flash diffuser and reflection panel.
Universal foldable flash diffuser provides soft even flash illumination.
Remote control, works with Canon Nikon Pentax and Sony Camera with New Mi Hot Shoe like Sony A7 A7S/A7SII A7R/A7RII A7II A6000 A6300 A6500.
Kit includes:(1)TT560 Flash + (1)Universal Portable Softbox Flash Diffuser + (1)Universal 5-in-1 Multi Function Remote Control.

Check Stock

Vello Speedy Camera Rotating Flash Bracket with TTL Off-Camera Flash Cord for Canon EOS Cameras (1.5') Kit

Universal Lengthen Hot Shoe Extension Bracket- Works as an extension bar mount to attach two rigs at the same time. It attaches LED lights, microphones, monitors, flash, strobe etc, to your dslr camera,DV, smart phone holder, gimbal stabilizer and any camera rigs with 1/4” screw hole or hot shoe bracket..
Dual Cold Shoe Mount- 1x integrated cold shoe mount.
1x length adjustable cold shoe mount. Adjustable range: 3-3.5”. International Standard cold shoe mount compatible.Ideal for mounting monitor, on-camera lights, microphone shock mounts, flashes, hot shoe accessories,etc,.
Standard 1/4” Tripod Screws- Three 1/4” threaded holes for tripod, light stand, handle grip and other support. Can directly attach this hot shoe extension bar to a tripod via 1/4” tripod screw hole..
Hot Shoe Mount Attach Base- Comes with removable universal hot shoe bracket to connect the hot shoe extension bar mount via its 1/4” male screw.And attach the extension bar mount to dslr camera via its hot shoe base..
Durable and Solid & Durable- Made of whole aluminum alloy. Black anodized for higher durability. Total Length:8”, Net Weight:3oz. If you have any question with your order,please feel free to contact us..

Check Stock

NEEWER 6.6’/2m TTL Off Camera Flash Speedlite Cord Compatible with Nikon SB-5000 SB-910 SB-900 SB-800 SB-700 SB-600 SB-400 Nikon Z7 Z6 Z6II Z5 D850 Cameras NEEWER 750II NW420 NW655 Z1 Flashes

【Off-Camera Flash Control】 The cable provides you with total TTL control for a digital/film camera and flash using the standard ISO shoe connection. Compatible with Nikon SB-5000, SB-910, SB-900, SB-800, SB-700, SB-600, SB-400, SB-80DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24, SB-22 flashes and compatible with Nikon Z7, Z6, Z6II, Z5, D850, D810, D780, D750, D500, D7500, D5600, D5300, D5100, D3300 cameras.
【Eliminate Shadows】 The cable helps achieve off-camera flash photography results without the harsh shadows behind your subjects when using direct flash exposures..
【Flash Shoe Mount】 Features a flash connection shoe mount on one end for connecting your camera flash speedlite and a 1/4”-20 threaded hole to connect a tripod stand. Mount your flash on a tripod stand to free your hand from holding the off-camera flash.
【Camera Shoe Mount】 Features a camera connection shoe mount on the other end to connect to your camera’s hot shoe. There is a locking mechanism on the side for secure locking..
【Durable Coiled Remote Cable】 The off-camera flash shoe cord keeps all on-camera functions of the flash within 6.6’/2m meters. The extended length and durable cable ensure your shooting experience is convenient and free..

Check Stock

Pixel e-TTL Flash Hot Shoe Adapter with Extra PC Sync Port for Canon DSLRs and Flashguns

This adapter enables you to trigger flash attached on top of the adatper hot shoe as well as other flash connected via PC sync lead..
It fits all Standard ISO 518-2006 hot shoe flashgun..
It has a PC sync socket so you can connect an additional studio light or flash via a PC sync cable..
It supports all function of Canon e-TTL flashgun..

Check Stock

Opteka BC-10 Universal Double-Sided 7.5 X 4-Inch Bounce Card for External Camera Flashes

DEDICATED - The Digitalmate 130N dedicated flash is a flash unit that fits into your camera's hot shoe. The dedicated flash is a great piece of gear that communicates with the camera. A dedicated flash is a far better tool than the built-in flash because of the versatility it gives you..
AUTOFOCUS - The Digitalmate flash provides an independent AF assist. When a flash is mounted to the camera, the AF Assist option is enabled. The normal AF Assist light will not be used, instead the flashes autofocus assist system will take effect..
TTL - The flash and ambient light are reflected by the subject through the camera lens and then metered by the camera's TTL metering system. The flash power is adjusted accordingly. A digital camera TTL flash system, often known as E-TTL, involves firing a pre-flash before the actual exposure.
QUICK SPECS - Full TTL dedication, Backlit LCD screen, Guide number: 130 ft. (40m), Power save mode, Auto temperature control (overheat protection), Fine brightness control, Metal hot shoe, Rapid recycle time (0.2-6 seconds), Works on 2 AA batteries, Memory function (retains previous setting after restart).
COMPATIBILITY - NEX 3, NEX 3N, NEX 5, NEX 5T, NEX 5R, NEX 6, NEX 7, A5000, A5100, A6000, A6100, A6300, A6500, A9 APS-C Digital SLR C....

Check Stock