Top Flanged End Pressure Relief Valve Reviews

Watts Brass & Tubular 374A 3/4 Boiler Relief Valve

  • 1/4" male NPT 175 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 175 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

UPE Group New 1/4 ASME Brass Safety Relief Valve 140 PSI American Made Compressed air pop Off Valve

  • 1/4" male NPT 140 PSI Industrial air compressor / tank pressure safety relief valve..
  • Also known as a "Pop Off" or "Blow Off" valve..
  • This relief valve is manufactured in the United States and is stamped with "UV" & "NB" symbols..
  • The relief pressure of this valve is set at 70 PSI and is accurate within + or - 3% of the set pressure..
  • Features a silicone rubber soft seat relief valve to prevent leaks.
Check Stock

PPE Race Fuel Valve for 2004.5-2010 Duramax LLY/LBZ/LMM 113073000 with PPE Viton O-Ring Upgrade for PPE Race Fuel Valve

  • The PPE Race Fuel Valve (heat treated stainless steel construction) replaces stock or a shimmed pressure relief valve..
  • This valve helps maintain fuel rail pressure during high engine load conditions by completely blocking the pressure relief port (effectively eliminating fuel return to the fuel tank). It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient PRV spring pressure..
  • Kit Includes PPE Viton O-Ring 1137073001.
Check Stock

Acecare Charging Station Also Called Filling staion for Compressed air refilling

  • CONNECT. Connect compressor with valve to fill gases to tanks or pcp air guns..
  • WITH GAUGE. It is with gauge that shows the pressure in the tank or gun that receive the gases..
  • EASY TO INSTALL. It is easy to connect the valve and compressor, just very few steps..
  • WITH PRESSURE RELIEF KNOB. It is with pressure relief knob that will relief the rest pressure in hose to keep it safe when you take off it from valve..
  • WITH HOSE. The filling staion is with hose on it, and you do not need to prepare another hose when you fill gases..
Check Stock

Tool Daily Thermal Release Valve for Pressure Washer Pump, 1/4 Inch NPT, 2-Pack

  • Fitting: 1/4″ NPT. The outside diameter of male thread is 0.54 inch. Include 2 pieces pressure washer release valve..
  • Compatible with many brands, such as Generac,Homelite, Karcher, Briggs, Power Stroke, Husky, Black Max, Craftsman, Him Ore and Ridged pressure washers. Replaces Homelite part numbers 678169004, 678169002 and 678169001. Replaces Briggs and Stratton parts 208673GS, 21783GS, 194298GS and B3090GS..
  • Thermal Relief Valve protects pressure washer pumps operating in a safe temperature range to prevent overheating. When water temperature reaches above 145º F, pump seals may fail. The thermal relief valve will open to release hot water and allow cold water to enter the pump. So it continues to operate at a safe temperature. If the pump have ever overheated, the thermal relief valve must be replaced..
  • Made of brass. Max. inlet pressure of pumps is 200 PSI..
  • Quick reply within 10 hours. Any issue or question, please free to contact with us..
Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

  • BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
  • FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
  • HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....
Check Stock

Keg Regulator, Kegerator Regulator, Beer Regulator, Co2 Tank Regulator, Beer Keg Regulator, Co2 Regulator Gauge with CGA-320 Inlet, 0-60 PSI Working Pressure, 0-3000 PSI Tank Pressure By MRbrew

  • ????【No Leaks】The co2 regulator wears two tank washers to prevent leakage of the connection between the tank and the c02 regulator.
  • The relief valve on the keg regulator also has a food grade silicone washer to prevent leakage of the relief valve..
  • ????【Maintains Consistent Pressure】The lock ring can be quickly locked without re-adjustment, And maintains steady Co2 pressure with no leaks. Sturdy durable dual gauge beer regulator features a multi-stage body that gives you more precise control when making small adjustments to the output pressure..
  • ????【Easy to Adjust & Read】The kegerator regulator is easily adjustable by hand, Making adjustment effortless even at freezing temperatures. Whether it’s a bar, camping or family gathering, this beer keg regulator is your best choice..
  • ????【Relief Valve & Shut Off Valve】For added safety, The tap regulator has a manual pressure release valve that releases pressure at 55-65 PSI. There is also a shut off valve on the co2 pressure regulator that allows for instantly shutting off pressure to the keg without backing up your gas line and prevents backflow into the beer keg regulator..
  • ????【Care-free Warranty】Please feel free to contact us if any problem, we would try our best to h....
Check Stock

EVIL ENERGY Diesel Fuel Rail Pressure Plug Valve Compatible with Dodge 5.9L Cummins 2003-2007 213072800

  • INSTALLATION SITE AND FIT- EVIL ENERGY Fuel Rail Plug replaces the factory banjo bolt mounted on the top side of the pressure relief valve.Compatible....
  • Eliminate your stock pressure relief valve with this Fuel Rail Plug, which also prevents high-pressure fuel from being returned to the fuel....
  • APPLICATION-This is for maintaining fuel rail pressure under heavy acceleration. Also prevents bleed off overnight if the stock valve is stuck open or....
  • RIGID STEEL CONSTRUCTION: Each Fuel Rail Plug is constructed of stainless steel to avoid cracking and excessive heat expansion.Effective....
  • Weld-free construction that gives Fuel Valve better leakproofness.Threads in perfectly and doesn't leak..
Check Stock

DEF Fuel Injector Common Rail Fuel Plug-1050070 for 2003-2007 Ram 2500 3500 5.9L

  • Fitment:2003-2007 Ram 2500 3500 and 5.9L Cum-mins..
  • Material:Made of Stainless Steel to avoid cracking and excessive heat.Effective anti-oxidation,anti-rust,anti-corrosion..
  • Usage:Replace the factory banjo bolt mounted on the top side of the pressure relief valve..
  • Features:Maintain fuel rail pressure during high engine load conditions.Prevent high-pressure fuel from being returned to the fuel tank.Eliminate....
  • Benefits:Weld-free construction that give fuel valve better leakproofness.Capped off completely pressure relief valve increase security..
Check Stock

PPE 50-STAGE LEGAL Replacement Fuel Valve 113073000 & Viton O-Ring 113073001 Compatible with 2004.5-2010 GM 6.6 LLY/LBZ/LMM Duramax & 2007.5-2018 Ram 6.7 Diesel

  • California Air Resources Board Executive Order Number: D-701-12.
  • The PPE Replacement Fuel Valve (heat-treated stainless steel) replaces stock or a shimmed pressure relief valve. This valve helps maintain fuel rail pressure during high engine load conditions. It eliminates potential low fuel rail pressure DTC codes P1093 or P0087 (low fuel rail pressure during power enrichment) that are caused by insufficient pressure relief valve spring pressure opening, returning fuel to the fuel tank..
  • Fitment: 2004.5-2010 GM 6.6L Duramax Diesel | 2007.5-2018 Dodge Ram 6.7L Diesel.
Check Stock

Aquarium DIY CO2 Generator System Kit CO2 Generator System with Solenoid Valve Bubble Counter Check Bubble Diffuser Carbon Dioxide Reactor Kit for Plants Aquarium

  • ✪【Be made of aluminum alloy】It is strong, durable and efficient. Well-sealed caps and pipes, leak-proof, non-deformed, never loose. Professional pressure guage for pressure watching. Cheap, simple to create pure CO2 constantly by chemical reactions..
  • ✪【Solenoid valve】To control the on and off of CO2 generator system using with a timer(not included). Bubble counter with check valve: Flow-rate of CO2 gas indication device and prevent water flow back into the bottle..
  • ✪【Equipped with a safety valve】The pressure is greater than 4kg pressure will relief automatically, carbonated beverage bottle pressure is 8kg, safety is ensured..
  • ✪【The safety valve supports manual pressure relief】When the pressure is below 4kg, it can be manually relieved by pull the ring of the safety valve. It is very safe..
  • ✪【Come with a bubble diffuser】Refine the bubbles and make it easy to dissolve in water and be absorbed by plants. Inject to your aquarium with CO2 quickly and easily..
Check Stock

Cressi Mini Console PD2 (imperial)

  • The Mini Submersible Pressure Gauge luminescent dial reads from 0 to 5000 PSI (350 BAR) and is a must-have for any Scuba Diver..
  • For at-a-glance monitoring of air pressure, the instruments face is divided into three different colored zones..
  • The blue zone is the safety zone, indicating an air-pressure from 3000 to 5000 PSI (200 to 350 BAR)..
  • The scale in red indicated when the air is about to end. The alert zone is indicated with red stripes and is when the air pressure is below 600 PSI (50 BAR)..
  • The front glass lens is made to act as a pressure relief valve. n the event of a sudden increase in pressure inside the instrument, the glass rises slightly, allowing the excess pressure to escape..
  • The Instrument is housed in a small, modern shaped boot, made from polycarbonate and Desman, to protection from shocks, scratches and ensure lightness..
  • The Gauge Boot has an attachment point for a clip or lanyard..
  • The Mini SPG is equipped with a 7/16" threaded high-pressure hose..
  • The Mini SPG is developed and made in Italy by Cressi, a brand pioneer in Scuba Diving, Snorkeling and Swimming equipment since 1946..
Check Stock

Aeromotive 15633 Fuel Pressure Gauge - 0 to 100 psi

  • 5'' Diameter 0-100 PSI Liquid Filled Includes integral pressure relief valve.
Check Stock