Top Flange Setting Tools Reviews

Oatey GIDDS-173390 43539 Replacement Flange Forcast Iron, 4 Inch, PVC

  • This PVC plastic compression closet flange is a replacement for a cast-iron flange. It fits into 4-inch pipes with 3-inch stainless steel bolts..
  • Replaces broken cast iron closet flanges.
Check Stock

VitaMia Wearable Wireless Double Electric Breast Pump, 16 Levels 3 Modes , Quiet & Vibration- Free Breastfeeding, Silicone Breast Shield, Long Battery Life, Portable & Hands Free

  • 003cB003eCordless Wearable Breast Pump003c/B003e - Allows new mom's to supplement the breastfeeding of their baby, while maintaining freedom of movement.
  • 003cB003eHands-Free003c/B003e- Dual cups and silicone breast guard - with 24MM flange maximizes comfort and safety for mom and baby, while the 250ml capacity cups provide ample capacity..
  • 003cB003e3 Modes With 16 Levels003c/B003e - Allows mom to find her comfort zone- lactation and massager mode with 16 levels each + auto mode starts at 1 and gradually increases to level 12.
  • 003cB003eHygienic & Easy to Clean003c/B003e- Not only does the portable wearable design make it convenient to use, but it is easy to clean. Duckbill Design prevents back-flow contamination for healthier milk.
  • 003cB003eInsulated Pump for Quiet Operation003c/B003e - 1200mah Battery 2.5 Hours to Charge (USB), up to 90 minutes of use (depending on level) - Memory Feature will store the last setting. 24mm Flange - Bra Straps Included.
  • Easy to Use - Features a notch in flange and collection cup to allow pouring without opening. To avoid leaks make sure the notches are aligned when assembling and that the cup lip under the flange around the entire circumeference.
  • Feature 6 Dimensions - Base Unit 128mm x 107mm x10mm (5x4.2x1 inches).
Check Stock

Plumbing Cover Plates, Escutcheon plate, Stainless Split Flange, Hinged Floor and Ceiling Plates for than 21mm Dia Pipe (Fits 1/2 Inch IPS), Chrome Finish, 6 PCS

  • Size - The Shower Flange is suitable for pipes of any material less than 21mm in diameter. Please measure your pipe to make sure that it matches the measurements on this product..
  • Material - The hinged floor and ceiling plate flange cover is made of 304 stainless steel, which has great heat resistance and corrosion resistance, that can be applied for long time use. Chrome Finish..
  • Easy Installation - The hinged floor and ceiling plate flange cover can be easily installed without experience a hassle-free installation with no expert plumbing skills or tools..
  • Application - The hinged floor and ceiling plate cover can be applied at the home, office, shopping mall and so on. Also can be installed at kitchen faucets, sinks, toilets, and so on..
  • Escutcheon flange with tight grip - used to cover and close the gaps between the pipe/ IPS and the inside diameter of the floor or ceiling to avoid damage and leakage..
Check Stock

Replacement Escutcheon Cover Plate, 4 Inch Universal Shower Arm Flange Escutcheon Replacement Cover Plate, Chrome

  • Excellent Design: Do you have a larger hole where your shower arm is located? Do you want to cover up this ugly hole? If so, Ancable 3.5" large diameter flange is designed for this and is perfect for covering gaps, holes and damage in walls. Ideal for G1/2" standard shower pipes..
  • Top Material: Shower arm flange escutcheon plate is made of high quality stainless steel, not easy to rust and durable. A durable rubber spacer in the center guarantees a perfect fit, allowing you to use it comfortably for long periods of time..
  • Easy to Install: Just remove the shower head and slide the new flange onto the wall, the additional attached small gasket on it made it fit snuggly against the pipe and keep water out. No tools required, installation takes just a few minutes..
  • Perfect Accessory: With this shower arm flange, save yourself time and money when remodeling your shower without having to go to the big store to find the right size. The chrome finish looks beautiful and pairs beautifully with other chrome accessories to match the modern style of your bathroom..
Check Stock

Light Duty Utility Clamp, 8.5\ Capacity, 500 LB Clamping Pressure, 5/8\-5/16\ Rail Size, 3-1/4\ Throat Depth, 5/16-18\ Tapped Hole, UD85, Strong Hand Tools

  • The Pop-It tool flange spreader is used for both flange spreading and equipment lifting. Simply put, it’s the most versatile tool on the market for these applications..
  • The Pop-It flange spreader takes the place of a hammer and wedge and can spread or lift 10,000 pounds up to 5.5 inches with 120 pounds of force at the ratchet handle..
  • The Pop-it Tool flange spreader can be used in a multitude of industry applications such as gasket replacement, blinding, drive shimming, and valve service..
  • The Pop-It Tool also works well when lifting equipment for alignment work, removing gears or impellers from shafts..
  • Kit includes (2) P95-525 Pop-It Tools, (2) SMP Safety Chocks, and a hardened carrying case with custom foam inserts. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers. The Pop-it Tool replaces wedges and pry bars to protect your workers..
Check Stock

TOMMARS Sheet Metal Hole Punch Panel Flanger Tool Special Rusted or Damaged Panel Repair Tool Joggler Flange Pliers Edge Setter

  • Special tool to achieve the hole punching and flanging of work piece, for creating and installing patch panels, replacement panels, or custom sheet metal work..
  • One part of the tool creates flanges for weld joints that are overlapping, whereas the other part is capable of punching the weld hole with Φ5mm. Used to flange onto sheet metal up to 20 gauge (1.2mm)..
  • Punch and flange tools are ideal for repairing or restoring rusted or damaged panels when a replacement cannot be sourced or when repair is more cost effective than replacement..
  • This Punch & Flange Pliers is Suitable for automotive body repair, also for sheet metal, iron plate, plastic, machinery, etc..
  • The tool features a spring return handle, which allows for ease of operation. Designed with anti-slip rubber grip for safe use..
Check Stock

Deluxe Beach Umbrella Sand Anchor | Sand Auger | Umbrella Holder for Strong Winds | One Size Fits All w Mesh Carry Bag

  • HEAVY DUTY ULTIMATE BEACH UMBRELLA SAND ANCHOR: ONE UNIVERSAL Size for all beach umbrellas with pole diameter of upto 1.5".
  • UPGRADED to 5 level WIDE spiral flange compared to 2-3 flanges or same width shaft from top to bottom from other brands..
  • EASY INSTALL BEACH UMBRELLA SAND AUGER: It remains firmly in the sand, or soft ground, to secure a beach umbrella against winds upto 50 mph.
  • Metal anchors rust from the sand and salt of the ocean, get hot in the sun, and are sharp and dangerous. This sand anchor from BeachMall is made with sturdy ABS Plastic, that is stronger than metal and will last longer..
  • STURDY & DURABILITY: Its wide spiral flange, built on a round cone shaped shaft, digs easily into sand, mixtures of broken shell, shale, etc..
  • More sand on each flange makes difficult for the wind to remove the anchor from ground. No hassle of digging holes to install your umbrella! Much easier to install due to taller cone and narrow bottom shape with triangle cut space at each flange to ease rotating the anchor in sand. MUST TRY TO BELIEVE our patent pending anchor!.
  • EASY SET UP IN JUST SECONDS - Its comfortable h....
Check Stock

Corla 4" Modern Oversized Shower Arm Flange | Universal Replacement Escutcheon Cover Plate (Matte Black)

  • [TIMELESS DESIGN] Corla's Oversized Shower Arm Flange Escutcheon Plate is a Simple Way to Modernize Your Bathroom Shower..
  • [QUALITY CRAFTSMANSHIP] Made with Premium Stainless Steel and Features a Durable Rubber Center Gasket for a Perfect Fit and Finish..
  • [OVER-SIZED] Extra Large Diameter, Great for Covering Gaps, Holes and Damage on Wall. Fits All Standard 1/2" Pipes..
  • [EASY TO INSTALL] No Tools Required. Simply Remove Your Shower Head, Slide the Flange Down Your Shower Arm, and Press it Firmly Against The Shower Wall..
  • [DIMENSIONS] 4 INCH Diameter x .45 INCH Depth.
Check Stock

BLUEROCK Tools Model SL-1.0 Portable Seam Locker for .5-1mm Pittsburgh Ducts Longitudinal Seams 27-20 Gauge

  • BLUEROCK Tools Model SL-1.0 Seam Locker Closer.
  • Closes .5-1mm thick Pittsburgh lock joints on rectangular and square horizontal ducts.
  • Lock Capacity: 28-20 gauge Galvanized, 26-20 gauge Standard steel), 0.5mm-1.0mm (See other model SL-1.25 and SL-1.5 for thicker gauge steel).
  • Height of Flange (the metal edge to be folded over): 6-11mm ONLY (See other model SL-1.25 for 11-13mm flange height).
  • Motor Data: 120v, 60Hz, 11.6 Amps, 1400W, Standard US Grounded Plug.
Check Stock

Corla Modern 3.5” Square Shower Arm Flange | Universal Extra Large Replacement Escutcheon Cover Plate (Brushed Nickel)

  • [TIMELESS DESIGN] Corla's Square Shower Arm Flange Escutcheon Plate is a Simple Way to Modernize Your Bathroom Shower..
  • [QUALITY CRAFTSMANSHIP] Made with Premium Stainless Steel and Features a Durable Rubber Center Gasket for a Perfect Fit and Finish..
  • [OVER-SIZED] Extra Large Diameter, Great for Covering Gaps, Holes and Damage on Wall. Fits All Standard 1/2" Pipes..
  • [EASY TO INSTALL] No Tools Required. Simply Remove the Shower Head, and Slide the Flange onto Your Shower Arm..
Check Stock

Corla Modern Shower Arm Flange 3.5” Extra Large | Universal Escutcheon Replacement Cover Plate (Matte Black)

  • [TIMELESS DESIGN] Corla's 3.5” Oversized Shower Arm Flange Escutcheon Plate is a Simple Way to Modernize your Bathroom Shower..
  • [QUALITY CRAFTSMANSHIP] Made with Premium Stainless Steel and Features a Durable Rubber Center Gasket for a Perfect Fit and Finish..
  • [OVER-SIZED] Extra Large Diameter, Great for Covering Gaps, Holes and Damage on Wall. Fits All Standard 1/2" Pipes..
  • [EASY TO INSTALL] No Tools Required. Simply Remove Your Shower Head, Slide the Flange Down Your Shower Arm, and Press it Firmly Against the Shower Wall..
  • [DIMENSIONS] 3.5 INCH Diameter x .45 INCH Depth.
Check Stock

1/4 Grommet Eyelet Setting Pliers with 100 Silver Grommets

  • Professional hand tool eyelets for setting in fabric, leather, canvas and more.
  • Special compound jaw design produces proper anvil/mandrel alignment, leverages hand strength.
  • includes 100 self-backing 3/16" inside dia.
Check Stock

4 Pcs Flange Two Hole Pin - Stainless Steel- 1-1/8'' 1-5/8'' Diameter

  • 【Set 2 Hole Pins】1-1/8'' Diameter, work with Bolts Holes Recommended 3/8'' to 1.0''.
  • 【Set 2 Hole Pins】1-5/8'' Diameter, work with 1/2 '' to 1-1/2'' Bolt Holes Up to 3'' Thickness of Flange.
  • 【Easy installation】The 2 hole pins pipe fitting tools is ergonomically designed for lightweight construction and easy installation with removable threads to accommodate different lengths. By using this two hole flange alignment pin set, you can easily install and level the pipe.
  • 【Package Included】4Pcs/1set, 1-1/8'' two hole pins and 1-5/8'' 2 Hole Pins.(As the picture shows).
  • 【Note】Professional installation is highly recommended (No Instruction Included).For any needs please contact us and got an reply within 24 hours.
Check Stock