Top Flange Flanges Reviews

Idaho Jones Spectra Wide Mouth Connector (2pcs) | Premium Quality Base Connectors for Spectra Breast Pump | Set of 2 Widemouth Connectors 100% Compatible with Spectra S1, Spectra S2, Spectra 9 Plus

  • ... Switch Between Spectra and Other Brands like a Pumping Queen – For heavenly expressing comfort, pair each Idaho Jones Spectra Base Connector with a breast shield of your choice. While Maymom base connectors break the bank, our reasonably-priced set of 2 Spectra adapters is a perfect match for a wide range of flanges - Lansinoh Comfort Fit, MayMom MyFit, Pumpin Pals and Lacteck. PLEASE NOTE that you need purchase these parts separately..
  • Outstanding & Easy-to-Clean Spectra Accessory Replacement - Create the comfiest flange/funnel! Seamlessly joining the best pumps with the flanges you prefer is essential against nipple aches, soreness, or tenderness. And it’s much simpler to clean a flange + a base connector than a Spectra 1-piece flange. The Idaho Jones Spectra Wide Mouth Base Connector works ONLY with the following bottles: Spectra, Avent, Maymom, Pumpables and Motif. NOT with other widemouth bottles..
  • Mindful Design Meets Scientific Precision – Switch from the poorly-fitting hard plastic of authentic Spectra accessories to the smart Idaho Jones Spectra Pump Base Connector. Enjoy a snug fit that’s a breeze to put in and out hands-free pumping ....
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

VCT Pneumatic Auto Body Air Punch & Crimper Crimping Flange Flanger Tool Pipe

  • This tool works as both an air punch and air flange for auto body repair at the shop or home garage! The air flange has a versatile head that rotates 360 degrees to easily crimp flanges or lap joint sheets and pipes. The punch can create 3/16 in. holes for fastening and welding..
  • Heavy duty head rotates 360° to easily crimp flanges or lap joint sheets and pipes.
  • Punches accurate 3/16 in. holes for fasteners or welding.
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

SYKRSS 3.0 Mild Steel V Band Clamp Flat Flange Kit Assembly

  • Material-Each assembly consists of two Mild Steel flanges and one 304 Stainless Steel V-band clamp. The V-band clamp design allows for a gasket free....
  • Application- The V-Band Clamps makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes and the....
  • Excellent Sealing-The V-band clamp applies uniform force around the flange maximizing the seal potential of the flanges, Once tightened, friction....
  • The 3.0" v band clamp fit for 3 Inch O.D. pipe. Of course, we can't only provide you with mild steel V band flange clamp kit, also have stainless....
  • This item is not vehicle specific. It is compatible with a wide range of applications. Please review the specifications and verify compatibility prior....
Check Stock

Improved Racing EGM-500 LS Engine Oil Pump Pickup Tube Brace/Girdle

  • Machined from lightweight 6061-T6 aluminum, black anodized and laser-marked.
  • Distributes even clamping force around pickup tube flange by acting as an extension of the flange.
  • High-strength Class 10.9 M6 flange screws, zinc plated.
  • DOES NOT fit any LS oil pickup tube with welded flanges (GM Truck tube part # 12608593, Holley 302-1 and similar). DOES NOT fit pickup tubes with two screw holes on their flange (Holley 302-2 tube and similar)..
Check Stock

OATEY 43401 Set-Rite Toilet Flange Extender Kit, 1/4\ - 1\

  • Corrects an improper flange height from 1/4 in. - 1 in. during repair and remodels.
  • Easily extend the flange surface above the floor for optimum sealing with a standard wax ring.
  • Use on existing PVC, ABS, cast iron, and stainless steel ringed flanges.
  • Spacers can be combined to meet the desired height.
  • Foam rubber gasket seals the spacers to the new flange.
Check Stock

Nenesupply 24mm Flange Pump Parts Compatible w Spectra S2 S1 Breast Pumps Replacement Kit for Spectra Pump Parts S2 Parts S2 Accessories Inc Flange Duckbill Valve Backflow Protector

  • NENESUPPLY COMPATIBLE PUMP PARTS 24mm FLANGE FOR SPECTRA S1 S2 9 PLUS BREASTPUMPS. Made by Nenesupply. Inc 2 Medium 24mm Flanges, 2 Duckbill Valves, 2 Backflow Protectors, and 2 Tubing. The flanges need to connect with WIDE MOUTH bottles..
  • COMPATIBLE PARTS MADE BY NENESUPPLY. Interchangeable and Compatible with Spectra flanges, S2 Accessories, backflow protectors, valves, and tubing..
  • COMPATIBLE WITH WIDE-MOUTH BOTTLES. Compatible with Spectra bottles and Nenesupply wide mouth bottles. DOES NOT work with OTHER WIDE NECK BOTTLES. CLOSED SYSTEM. No contact between milk and tubing..
  • DIFFERENT FLANGE SIZE AVAILABLE: 17mm, 19mm, 21mm, 24mm, 27mm, 30mm. Refer to size selection guide in product photo to choose the right size for you..
  • BPA Free. DEHP Free. Dishwasher (top rack) safe. All parts can be sterilized with water steam or boiling water. FDA compliant for food contacts. Tested by independent labs for safety..
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Kitchen Sink Flange, Stainless Steel Flange For Insinkerator Garbage Disposals And Other Disposers That Use A 3 Bolt Mount By Essential Values

  • BEST VALUE - Our Stainless Steel Sink Flange Is Cost Effective Without Compromising Quality.
  • FOR GARBAGE DISPOSALS - For Use With Insinkerator Or Other 3-Bolt Style Disposal Mounts On Standard Size Sink Depths..
  • USE - A Great Kitchen Sink Flange To Replace Your Grimey Flange On A New or Existing Sink, Or For Swapping Out The Decor Of Your Existing Sink Flange.
  • Measures 4.5" Wide X 1.5", Compare To Kohler, Insinkerator, Delta Branded Flanges. Works With A Sink Stopper (Not Included).
  • EASY TO INSTALL - Plumbers Puttyy Is Required To Make A Tight Seal Between The Top Of The Sink And The Flange.
Check Stock

Tb Woods 5J12 Coupling

  • Item - Sleeve Coupling Flanges: Sleeve Coupling Flange.
Check Stock