Top Flange Fitting Kit Reviews

Honeywell International VR8200A2132 Valve

  • Includes: One 1/2″ x 3/8″ straight busing, one 3/4″ straighr flange, one hex wrench, one pilot compressing fitting for 1/4″ O.D. tubing, 393691 Natural to LP gas conversion kit.
  • Gas valves include manual valve, two automatic operators, servo pressure regulator and pilot adjustment.
  • Solenoid-operated first automatic valve opens on thermostat call for heat.
  • Diaphragm-operated second automatic valve opens under control of regulator.
  • closes if gas or power supply is interrupted.
Check Stock

Idaho Jones Spectra Wide Mouth Connector (2pcs) | Premium Quality Base Connectors for Spectra Breast Pump | Set of 2 Widemouth Connectors 100% Compatible with Spectra S1, Spectra S2, Spectra 9 Plus

  • Customize Your Pumping Experience – Do you love your Spectra pump but its 1-piece silicone flange is either too tight or too large, causing pain or low milk output? Specifically made from the finest hospital-grade material, the advanced Idaho Jones Spectra Connectors help you effortlessly hook the best-fitting breast shields on the market to your favorite Spectra breastmilk pump and turn into a flexible 2-piece flange. Suitable for Spectra S1, S2, 9 Plus and Spectra Synergy Gold breast pumps..
  • Switch Between Spectra and Other Brands like a Pumping Queen – For heavenly expressing comfort, pair each Idaho Jones Spectra Base Connector with a breast shield of your choice. While Maymom base connectors break the bank, our reasonably-priced set of 2 Spectra adapters is a perfect match for a wide range of flanges - Lansinoh Comfort Fit, MayMom MyFit, Pumpin Pals and Lacteck. PLEASE NOTE that you need purchase these parts separately..
  • Outstanding & Easy-to-Clean Spectra Accessory Replacement - Create the comfiest flange/funnel! Seamlessly joining the best pumps with the flanges you prefer is essential against nipple aches, soreness, or tenderness. And it’s muc....
Check Stock

BUSY-CORNER 4C-4782 Seal O-Ring Kit, Nitrile 90, Hydraulic Hose Fitting Orings, Fits CAT Caterpillar Excavator 2701528 4C4782 Replacement

  • High Quality:Made of Buna-N 90D (NBR) material,are durable,high temperature resistance,anti static,oil resistant,UV resistance,heat resistant,wear resistant,exceptionally suited for high pressure applications..
  • Multi Size:You can get a good selection of 32 different CAT OEM part numbers oring in this kit,can meet almost all your needs..
  • Wide Application:This Kit use for sae stor & orfs fittings,code 61/62 flange O-Rings,Caterpillar hydraulic hose fitting oring..
  • Handy Packing: Comes with a heavy duty storage case that keeps each size o rings separated and organized,that makes more convenient to carry, select and collect..
  • Customer Service: You are unhappy for any reason, return your kit with no questions asked and we will provide a full refund..
Check Stock

Brooklyn Pipe 10 Pack 1/2 Inch Floor Flange Cast Iron Pipe Floor Threaded Pipe Fitting Industrial Steampunk Vintage Retro Decor Furniture DIY Wall Industrial

  • 1/2 INCH PIPE FLANGE - Our Brooklyn Pipe floor flange is a great choice for all your DIY needs. This decorative flange is the perfect pipe fitting to....
  • SUPPORT AMERICAN BUSINESS - We live and sell in America, please help support our USA small business. We always go the extra mile for our awesome....
  • INDUSTRIAL DECOR- Our 3 hole flange is 2.5 inches in diameter and provides a unique look for all projects. Whether you're looking for an industrial,....
  • NO CHINA STAMP - Our forged malleable iron flange doesn't have the word "CHINA" stamped into the flange which is another reason why Brooklyn Pipe....
  • QUALITY CONTROL - We work directly with steel factories and hire licensed inspectors to review our Brooklyn Pipe products prior to being packaged.....
Check Stock

Exhaust Flange Kit For Harley Davidson 1984-2020 Touring, Dyna, Softail, Sportster, Evolution Big Twin, Evolution, and Twin Cam Models, Heavy Duty, No Rust by VANJOY (black)

  • 1.THE SAME MATTE BLACK AS THE EXHAUST IS. Matte Black Color exhaust flanges kit for Harley Models..
  • 2. FROM NOW ON, NO RUST ISSUE. Make of stainless Steel, rust proof, no mess, more durable..
  • 3. QUALITY. Quality compares to OEM flange kit. (OEM 65325-83). (OEM 65328-83)..
  • 4. SAME SIZE AS OEM. Specific dimension are all detailed..
  • 5. FITS WELL. Handmade Exhausts Flange Kit, quality Harley exhaust flange gasket kit for almost 1984-2021 Harley bikes except V-ROD..
Check Stock

Icon 437 22-1/2\ x 18-1/2\ x 6\ Bottom Drain Holding Tank

  • Built-in reinforcements for mounting a toilet.
  • Includes: 3" Threaded Fitting, a 2" Slip Fitting and a 3"ID/7"OD Flange Fitting.
  • Features a bottom drain and an 8 gallon holding capacity.
Check Stock

Polypropylene Pipe Fitting, Cross, Schedule 80, 1/2\ NPT Female for CR050

  • Ultra-Durable Quality with 100% tested: When selecting furniture pipe fitting for your home, Home TZH pipe and fittings are the way to go. Our durable black iron fittings are 100% tested and protected right at the factory. Home TZH Floor Flange of high quality close bite and will not get loose after long time use. Our Pipe Fittings can prove functional & elegant throughout the years..
  • Wide Application: Our pipe fittings come in 10 Packs for vintage furniture, DIY project and shelf hanging decoration applications in your home. Floor flange pipe fittings are perfect for DIY projects. Can be used to make pipe furniture, pipe clothing racks, pipe shelving, pipe table legs, industrial decor, etc. Constructed with extremely durable material, our cast iron pipe fittings work great without sacrificing functionality..
  • Without DIY Difficulty: Home TZH Industrial pipe flange comes with three standard holes allowing you to secure your flange to floors or walls. The floor flange is suitable for all kinds of surface application. Put this up in minutes. You can install the pipe fittings with easy to follow directions. Fix a wooden board with floor flange, than fix the whole bracket to the wall with screws and screw holder..
  • Your Personal DIY Style: The simple and indu....
Check Stock

Outer Inner Flange Lock Blade Bolt for Rockwell Worx 4-1/2' Compact Saw RK3441K WX439L WX531L WX420L 4.5' Saw (up grade version)

  • Kit included :Outer Flange, Inner Flange, Hex Key and 2 different size of locking screw.
  • Kit Designed for the Rockwell / Worx 4.5" Saw/ Porter Cable 4.5"/ Tacklife 4.5" compact saw.
  • IT NOT for Rockwell 3-3/8" Versacut saw RK3440K RK3551. WORX WX420L (the locking screw is good but the outer flange is not fit).
  • This is aftermarket kit , but fully compatible.
Check Stock

Garbage Disposal Flange, 3 Bolt Mount Stainless Steel Kitchen Sink Flange Kit with Splash Guard for 3 1/2 Inch Standard Sink Drain Hole, Sink Food Waste Disposer Installation kit

  • Disposer Sink Flange Kit - Compatible with ISE disposals, this brushed stainless steel sink flange features the Twist-On, Twist-Off quick lock design that helps ensure fast and easy replacement of existing disposer mounts..
  • Full Flange Kit with Splash Guard - It contains all the accessories you need, Sink flange, Splash guard, Mounting hardware (2-layer rubber sink gasket, support ring, mounting ring, cushion mount). No worry about finding other matching parts any more!.
  • Premium Material - 4 1/2" (Diam) x 1 1/2" (Depth), capacity up to 110lbs. High density 304 stainless steel flange with nitrile rubber splash guard, sturdy, durable, rust-proof, waterproof, easy to clean and reduce the noise made by your garbage disposer..
  • For Stainless Steel Sinks - This brushed stainless steel 3-Bolt Mount sink flange complements most stainless steel sinks, the brushed surface design is more durable than polishing, it can stay with you longer..
  • A Innovator for the Kitchen - We strive to build on better living. We’re innovators, passionate about life and the things that make it better. When you partner with CLEESINK, you partner with the future..
Check Stock

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

  • ...the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
  • Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel Pump, Filters, necessary hardware & bulkhead fitting to return fuel into the tank!.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Dokili Exhaust Pipe Manifold Gasket Spring Rebuild Kit Fit for Polaris Ranger 700 800 Sportsman 600 700 2002-2007 Touring X2 2009 2010 2011 2012

  • Fits well, quality compares to OEM Harley flange..
  • Stainless Steel, Chrome Metallic Color exhaust flanges.
  • Specific dimension are all detailed, Includes 2 flanges, 2 exhaust gaskets, 2 retainer clips, and 4 acorn nuts.
  • Handmade Exhausts Flange Kit with Tapered Gaskets and Nuts , quality Harley exhaust flange gasket kit for almost Harley Davidson bikes except V-ROD.
Check Stock

Renator RV Water Inlet Connection. RV City Water Inlet with Check Valve. RV Water Fill Inlet. RV Water Hose Connector, City Water Fill RV. Water Hose Flange. City Water Hookup for Camper (White).

  • A QUALITY BRASS CITY WATER INLET FLANGE DESIGNED FOR LONG-TERM OUTDOOR USE. Connect a hose to your RV easily and quickly. The flange’s pipe and threading are made from brass for superior seal and durability over its plastic counterparts..
  • 1-YEAR WARRANTY AND U.S.-BASED PHONE AND EMAIL SUPPORT. Rest assured you’re able to reach us for any tech support or other product related issues. We offer lifetime local phone and email support (available on packaging) and a 1-year warranty because we stand behind our product. As a bonus, you’d be helping to support American jobs..
  • EASY TO INSTALL. Simply remove screws and unscrew any existing flange, thread plumbing tape on the new valve, and screw it into the fitting..
  • PERFECT FIT AND SEAL. The flange is universal and should fit tightly without having to re-drill any holes. Plumbing tape with the brass thread make for a tight seal. The flange also contains a check valve to prevent backflow of water. Note: the angle of the flange must be threaded in correctly to avoid any issues..
  • DIMENSIONS. The flange is 3” in diameter, connects to a 1/2" threaded pipe on the inside, and is 1-5/8” deep. It can be connected to standard size garden houses..
Check Stock