Top Flange Drilling Machine Reviews

4 Inches Round Muffler Tip Catback Exhaust System Compatible with Acura Integra RS GS LS 94-01 Stainless Steel

  • ▶️ This catback is compatible with 94-01 Acura Integra, does NOT fit GS-R / Type R models.
  • ▶️ Aggressive deep and smooth tone sound while ensures smooth exhaust gas flow.
  • Dyno proven to instantly increases 15-25 horsepower or low end....
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Rounded Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Type-S 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.5".
Check Stock

4 Inches Burnt Muffler Tip Catback Exhaust System Compatible with Acura RSX Base Model 02-06, Stainless Steel

  • ▶️ This catback is compatible with 02-06 Acura RSX DC5 Non Type-S.
  • ▶️ It is high performance JDM racing design, i.e. maximizing smoothest high exhaust air flow rate. Dyno proven to instantly increases 10 -20 horsepower or low end torque.
  • It also can increase engine output and efficiency.
  • ▶️ Made of high quality T-304 stainless steel with computerized mandrel-bends for strength and durability.
  • TIG welded CNC machine flange for resistance against pressure and corrosion.
  • ▶️ Easy to intall, direct bolt-on. No drilling or modifications needed for installation. Removable silence, gaskets and hardware are Included.
  • ▶️ Muffler Tip Type: Burnt Tip | Muffler Exhaust Tip Diameter: 4" | Inlet Size: 2.25".
Check Stock

The Book of Five Rings

  • 14 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4800W copper motor. Maximum Speed: 500RPM. Maximum....
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig....
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and....
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum....
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is....
Check Stock

Naiture 60'' Stainless Steel Double Straight Shower Curtain Rod, Black Finish

  • The rod was made of stainless steel which will never get rust..
  • Drilling required. Includes double bracket flanges and mounting hardware..
  • NOTE：All M5 set screws are pre-installed on flange and ring, NOT packed separately.
Check Stock

Steel Pedal Movement on Bathroom Wastepaper Basket Version 3

  • The rod was made of stainless steel which will never get rust..
  • Drilling required. Includes double bracket flanges and mounting hardware..
  • NOTE：All M5 set screws are pre-installed on flange and ring, NOT packed separately.
Check Stock

Naiture 60 Stainless Steel Double Straight Shower Curtain Rod Brushed Nickel Finish

  • The rod was made of stainless steel which will never get rust..
  • Drilling required. Includes double bracket flanges and mounting hardware..
  • NOTE：All M5 set screws are pre-installed on flange and ring, NOT packed separately.
Check Stock

Aopin Rigid Flange Coupling 5mm Inner Flange Coupler Shaft for 3D Printer, Length 15mm / 0.59\ Motor Coupler Connector, Great Apply for Model Shaft, CNC, Motor Guide, DIY Encoder 4 Pcs

  • 【Rigid Flange Coupling Size】: Inner Diameter: 5mm/0.20 inch, Outer Diameter:15mm/0.59 inch, Total Height: 15mm/0.59 inch, Flange Diameter: 28mm/1.10 inch, Base Height: 3mm/0.12 inche, 2 x M4 Fastening Screws..
  • 【Wide Range of Use】: Rigid Flange Coupler Are Used In Servo Motor Systems, 3D Printer, Cnc Machine, Diy Encoderspindle Transmissions, Stepping Motors, Lifting Platforms, Machine Tool Transmissions, Stepping Motors, Encoders, Screw Drives, Machine Platforms Or Gearboxes, Etc. The Purpose Is To Firmly Connect The Driving Shaft And The Driven Shaft To Rotate Together And Transmit Motion And Torque. Great Suitable For Short Support Shaft, Bushing Model, Miniature Shaft, Model Airplane/ Boat / Car..
  • 【Couplings Material】: High-Quality Aluminum Alloy Material, The Surface Is Treated By Anodizing, With Superior Corrosion Resistance. Color: Red, Suitable For Working In High Temperature (-80℃ / +300℃) And Harsh Environments, Even If There Is Vibration And Shock , It Is Still Safe To Move..
  • 【Features】: High Transmission Efficiency. When The Rated Torque Is Exceeded, The Coupling Can Protect The Safety Of The Linkage..
  • 【Package】: 4 Pcs Rigid Flange Couplings. Aopin Recommends Using M2 Hex Wrench!.
Check Stock

Happybuy 10''/255MM Diamond Core Drilling Machine 4450W Wet Dry Diamond Core Drill Rig for Concrete Drilling Boring (Drill Bit Dia:4.25\/108MM)

  • 10 inch Max Drilling Diameter: Our core drilling machine generates extreme power because of its 4450W copper motor. Maximum Speed: 580RPM. Maximum Coring Diameter: 10"/255 mm. More importantly, the 4.25"/108 mm core bit in the picture is included..
  • Durable Construction: As the machine will work upside down, so water would unavoidable flow on to the drill machine. In this case, our drilling rig has a rustproof steel forged output shaft and waterproof copper water inlet for a long-lasting water supply..
  • Thoughtful Security Design: We also provide overload protection system and an upgraded cooling system. They are designed for avoiding burn-in and prolonging the service lifespan of the drilling press machine..
  • Ergonomic Handle & Stable Base: It features an ergonomic handle and large base support for effortless drilling or getting oblique holes. The aluminum guide rail makes the drill rig's movement more smooth and accurate..
  • Wide Application: The wet diamond core drilling rig can be widely used in drilling reinforced concrete, red brick, marble, and other materials. It is perfect for installing air conditioners, pipes, stair railings, and repairing highways, etc..
Check Stock

Naiture Stainless Steel 60'' x 30'' D Shape Shower Curtain Rod, Brushed Nickel Finish

  • Shower rod is made of separate rods, connected with connectors..
  • Drilling required. Rod may be cut to desired length..
  • Includes 48" L swivel support for wall or ceiling..
  • NOTE: All M5 set screws are pre-installed on flange and ring, NOT packed separately..
Check Stock

Naiture 60\ Never Rust Stainless Steel Straight Shower Curtain Rod, Black Finish

  • The rod was made of stainless steel which will never get rust..
  • Rod may be cut to desired length. 60" shower rod is one-piece rod..
  • Drilling required. Includes flanges and set screws, wall anchors and mounting screws..
  • NOTE：All M5 set screws are pre-installed on flange and ring, NOT packed separately.
Check Stock

Naiture 60\ Never Rust Stainless Steel Straight Shower Curtain Rod Chrome Finish

  • The rod was made of stainless steel which will never get rust..
  • Rod may be cut to desired length. 60" shower rod is one-piece rod..
  • Drilling required. Includes flanges and set screws, wall anchors and mounting screws..
  • NOTE：All M5 set screws are pre-installed on flange and ring, NOT packed separately.
Check Stock

Greenlee - Carbide Cttr Quick Chge 6Pc Hole Making 660

  • Ejector Spring on all sizes above 3/4-inch makes removal of slug easier. Minimum chuck size of 3/8 inch (9.5 mm).
  • Replaceable, cobalt-steel pilot drill with split-point tip to prevent walking.
  • Precision carbide teeth for optimum performance and durability.
  • Includes 5 cutter heads, arbor, hex key and case.Dimensions 7/8 inch, 1-1/8 inch, 1-3/8 inch, 1-3/4 inch and 2 inch cutter heads.
Check Stock