Top Fixture Clamps Reviews

Marhynchus 2 Pcs Aluminum Sprayed Cross Clamp Lab Stand Clamp Holder for Laboratory, Lab Clamp Holder(Large & Small) School Supplies

LABORATORY FIXTURE: Excellent laboratory iron clip, often used in the laboratory fixture accessories, also suitable for home use. Once it has locked something it will not easily break..
SIMPLE TO USE: They are ideal for stabilizing clamps without special support..
2 SIZES: They are 2 sizes of cross clamp, the large one is 10.8*2.3cm, the small one is 9.5*2.2cm..
APPLICATION: The body of the utility model is made of aluminum alloy with a screw for fixing the clamp on the support rod..

Check Stock

FOITECHY 4 Pcs Magnetic Welding Clamps,Adjustable V Type Welding Clamps,Adjustable V-Type Fixture,Magnetic V Pads Kit, Magnetic V-sharp Tab Holder Corner for Tack Welding

1.djustable V-Type Fixture Clamp: Magnetic welding clamps provide secure gripping power for rapid,hold and position round, flat, and square parts in light duty substructure applications.
2.4 Pack strong hand magnet(XDV4: 2"),Pull Force 12 lbs. Our V-type magnetic welding clamps are made of high quality stainless steel, sturdy and durable, can be used for a long time.
3.The V-type magnetic welding clamps are suitable for holding tabs, gussets, plates and odd shaped pieces in position for tack welding. They are widely used in doors, tool boxes, windows, wooden boxes, furniture, and other equipment..
4.Heat Warning: Avoid Pronlonged exposure to high heat. Rare-earth Magnets may demagnetize with temp. exceeding 185°F.

Check Stock

Omont Dryer Vent Hose 4 Inch 16FT Flexible Dryer Ducting Tube Air Duct Aluminum Insulated Flex Hose Kit Indoor Outdoor

HOSE + 2 CLAMPS: The dryer vent hose is made by high-quality aluminum (High Temperature Resistant & Corrosion Resistant & Long Lasting).
The Clamps are made by stainless steel (Rustproof & Corrosion Resistant & Heavy Duty)..
ADVANCED THREE LAYER : Under the PVC layer the dryer duct hose is built with 2 layers of aluminum foil. A layer of durable PET and steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes..
DUCTING PARAMETERS : 4" in diameter, This dryer duct is 16 feet long when fully extended, and the ducting can bend freely. Thermal endurance ranges from -22 to 260 F (-30 to 107 C)..
EASY TO INSTALL : Flexible and simple to Install the dryer vent hose. The dryer duct comes with two clamps to fixed the air ducting.Simple, convenient and durable..
WIDELY USED: The flexible dryer vent hose suits HVAC system. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications etc..

Check Stock

Omont Dryer Vent Hose 4 Inch 5FT Flexible Dryer Ducting Tube Air Duct Aluminum Insulated Flex Hose Kit Indoor Outdoor

HOSE + 2 CLAMPS: The dryer vent hose is made by high-quality aluminum (High Temperature Resistant & Corrosion Resistant & Long Lasting).
The Clamps are made by stainless steel (Rustproof & Corrosion Resistant & Heavy Duty)..
ADVANCED THREE LAYER : Under the PVC layer the dryer duct hose is built with 2 layers of aluminum foil. A layer of durable PET and steel wire helix to preserve the shape, keep your ventilation system free of rips and pin holes..
DUCTING PARAMETERS : 4" in diameter, This dryer duct is 5 feet long when fully extended, and the ducting can bend freely. Thermal endurance ranges from -22 to 260 F (-30 to 107 C)..
EASY TO INSTALL : Flexible and simple to Install the dryer vent hose. The dryer duct comes with two clamps to fixed the air ducting.Simple, convenient and durable..
WIDELY USED: The flexible dryer vent hose suits HVAC system. It will move and deliver air in Kitchens (cooking exhaust), Green Houses and Grow Rooms (Air Circulation, Intake, Exhaust and Light Fixture Cooling), Bathrooms (Smell and Moisture Exhaust), Dryer Rooms, Grow Tents and other applications etc..

Check Stock

Drive Roll Kit 0.02-0.03\ Solid Wire, 0.440 lbs

MAGJIG: Easily secure your fixture in place with 235 lb strong holding force. Whether doing woodwork or fabrication, simply drill a hole in a fixture and place the Jig in hole to use for downward pressure clamping. Strong Hold to flat and round surfaces to provide straight edge cuts.
CARPENTER OR WELDER: Great addition to any welding or carpentry tools. Similar use to c, right angle, 90 degree, spring, square and corner clamps. Frame fences, assembly jigs, cutting and gluing fixtures, blade guards, work supports, framing, installing cabinets or anything that makes your DIY crafts faster, safer and easier.
ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning. Does not use an electrical power source.
FEATURES: 3/4 inch standoff for flush mount. Designed with screw holes to add more security in a fixture. Use with the Magswitch woodworking starter kit, including featherboard attachment and universal mounting base. Use with a router table, woodworking bench, or wood jointer.
EASY TO CLEAN: Powerful magnet stays clean unlike traditional magnetic squares that hold on to metal chips e....

Check Stock

Headliner Indio Lighting Bar Pro (HL30022)

Lighting bar attachment for Headliner Indio DJ Booth.
Made from 1.3” (35mm) aluminum I-Beam truss.
88” (2.2m) tall by 98.5” (2.5m) wide.
80 lbs. (36 Kg) max load capacity, evenly distributed throughout the bar.
Mount lighting fixtures using standard 1.3” (35mm) Jr-clamps.
Includes couplers to mount bar to DJ booth.
Includes carrying bag (48” x 11” x 5” / 121 x 27 x 12 cm).

Check Stock

5/16\ Heavy Duty Double Gripping Nylon Hose Clamps, 225° F / 200 PSI Rated, 10 Pack (Made in USA/UK)

...ial are firm and reliable, no need to worry about rusting and cracking when installed on pipes.
10 Range sizes for options: these hose clamps are flexible and expandable with adjustable widths to fit 20 cm/ 7.87 inches hoses.
They include 10 steel hose clamps in different diameters to accommodate more hoses, and the fixture kit is flexible and easily extensible, with adjustable sizes ranging from 9 to 273 mm/ 0.35 to 10.75 inches.
Easy to install: the hose clamp is designed with a worm gear construction that adjusts its diameter to apply good sealing pressure.
It connects the hose so that the hose can be installed in a narrow space to prevent leakage.
These fixtures can also be applied for many times due to the 304 stainless steel material.
Wide application: the hose clamp could be firmly locked and applied to fasten hoses, pipes, cables, pipes, fuel lines, etc..
Suitable for many fields, like automotive, industrial, marine, shield, electronic or home applications.
Package includes: the hose clip kit comes with a total of 28 hose clips in a range of 10 sizes from 9 to 273 mm/ 0.35 to 10.75 inches, enough quantity for you to be applied for backup and replacement during daily life around your house, garage, lawn and garden.

Check Stock

BestTeam 10PCS T-Slider for T-Slot M6/M8 T-Track Slider Sliding Nut Aluminum Alloy T Slot Nut for Woodworking Tool Jigs Screw Slot Fastener M8

It can be directly into the aluminum slot hole in any of the assembly point.
Profile connection is one of the most use of accessories.
For the woodworkers out there that use T-Track this will help them to make their own jigs.
It is used for T-slot aluminum extrusions to connect other parts and connected together with T screw or others.
T-Slot nuts enable the user to add clamps to a fixture without tearing down existing clamps.

Check Stock

Pneumatic Clamp 1/8\ Intake Interface High Strength Pneumatic Hold Fixture for Welding

The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture, which is not affected by t.
It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool and expand the scope of use of the machine tool to realize multi-function o.
The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work.

Check Stock

Qingsi 5Pcs/Set 3D Sublimation Silicone Mug Wrap with 108Ft Heat Resistant Tape 11OZ 12OZ 15OZ Mug Mold Cup Clamp Fixture Heat Transfer Tapes for Printing Mugs Sublimation Transfer Machine

...aused by dislocation,suitable for 3D printing. The heat press tape also work well in protecting electronic products, transformer, electric motor, solder, as well as painting, packing fixing, printing PCB board..
❥❥❥PACKAGE INCLUDE：5Pcs/Set 3D Sublimation Silicone Mug Wrap 11 oz 12 oz 15 oz Mug Mold Cup Clamp Fixture with 33 m/ 108 feet Heat Transfer Tape for Printing Mugs Sublimation Transfer Machine.(3 Pcs Mug Mold,and 2 Rolls Heat Transfer Tapes.).

Check Stock

Sublimation Silicone Mug Wraps for 15OZ Mugs, 3D Rubber Mug Clamps (4PCS)

Main Material: Heat-resistant silicon and metal.
Used for: 3D 15oz mugs sublimation printing.
Heat-resistant silicon with metal clamps. The cup clamp fixture is high temperature resistant and elastic.
Easy to install and Good stability when printing, it's the best clamp and DIY tool for sublimation transfer..

Check Stock

Pneumatic Clamp, 1/8\ Intake interface Metal Cylinder Pneumatic Clamp Hold 50KG Clamp Force,Reduce The Labor Intensity of Workers

The operation is simple, and it is easy to realize automatic control, and the clamping type work can be performed without using artificial force..
The pneumatic reaction speed is fast and the testability is high, so the test time is shortened and the production efficiency is improved in the production process..
It can stably ensure the machining accuracy of the workpiece. When the workpiece is clamped with pneumatic clamps, the positional accuracy of the workpiece relative to the tool and the machine tool is guaranteed by the fixture..
It can reduce the auxiliary working hours, improve the labor productivity, and clamp the workpiece with the pneumatic clamp. The workpiece can be quickly positioned and clamped without the need of alignment, which significantly reduces the auxiliary work..
It can expand the scope of use of machine tools and realize multi-function of one machine. The use of special pneumatic clamps can change the purpose of the original machine tool..

Check Stock

3D Mug Sublimation Silicone Mug Mold Mug Wrap Fixture for 11oz 12oz and 15oz Mugs Printing

Material: heat-resistant silicon and metal.
Used for: 3D 11oz /15OZ/12oz mugs sublimation printing.
You will receive 2 pcs 11oz mug clamp fixture, 2pcs 12oz mug wrap, 2pcs 15oz mug clamps.
Any other questions, you can email us freely.

Check Stock