Top Fittings For Piping Reviews

Class A Customs 24 Gallon RV Waste Black Water Holding Tank WT-2400

24 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 38 Gallon RV Waste Black Water Holding Tank WT-3800

38 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 28 Gallon RV Waste Black Water Holding Tank WT-2800

28 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 18.5 Gallon RV Waste Black Water Holding Tank WT-1850

18.5 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

Class A Customs 48 Gallon RV Waste Black Water Holding Tank 56 x 30 x 9 WT-4800

48 Gallon RV Waste Water Holding Tank MADE IN THE USA by Class A Customs using Medium Density Polyethylene (MDPE) Resin TANK NOT FOR FRESH OR DRINKING WATER USE – WASTE/GRAY WATER USE ONLY – Used in RV’s Campers, Trailers, Motorhomes and Tiny Houses.
INSTALLED OUTLET 3” ABS Female Pipe - outlet can not be moved DO NOT over-tighten fittings damage will occur Dump valves do not hook directly to the 3" ABS fitting, from the outlet run PVC or ABS piping (not included), dump valve (not included) is added to the piping..
INLET & VENT INSTALLATION Class A Customs Black Water Tanks only come with the outlet the end user will determine where the inlet and vent will need to be placed and install, hardware NOT included. TANK MUST BE VENTED allowing air in and out when in use. *DO NOT PRESSURIZE TANK* DO NOT over-tighten fittings damage will occur..
NOT INCLUDED Inlet and Vent Fittings / Additional Fittings / Hardware / Mounting Hardware / Dump Valve / Piping NOT INCLUDED.

Check Stock

2" x 100' 10 Mil Pipe Wrap Tape

Corrosion protection for metal piping systems above and below ground..
Corrosion protection for fittings and joints on mill coated pipe..
Corrosion protection of electrical conduit & fittings..
Resists corrosive action by salt water, soil acids, alkalies and salts..
Prevents dielectric corrosion between buried steel pipe and soil minerals..

Check Stock

Goulds J7 Convertible Jet/Deep Well Pump - 115V/230V - 3/4 Hp

Back Pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.

Check Stock

Goulds HSJ15N Convertible Water Well Jet Pump, 1-1/2 HP, Single Phase, 115/230 V.

Back Pullout design for service without disturbing piping.
Two compartment motor for access to wiring and replaceable components.
Nozzle clean out plug in Shallow well adapter, premium O-RING design fittings need only be hand tight to seal.
Corrosion resistant, plastic tubing and fittings are easily removed for cleaning.

Check Stock

200pcs Disposable Icing Piping Bags – 12 Inch Pastry Bag Frosting Bags for Cake Cookies Baking Decorating – Plastic Tipless Piping Bags

MULTI-FUNCTIONAL DECORATION: These piping bags can be used for cream cookie decorating, birthday wedding cakes, pastries, chocolate decorating, macarons, cake frosting, holiday desserts, sauces and adding decorative nice pattern details like stars and flowers to your baking desserts.
FITS ALL SIZES OF PIPE FITTINGS: You just need to cut the tip of the tube bag according to the size of the fitting, place the fitting in the bag, insert the piping bag and you’re ready to decorate your dessert. Our piping bags fit perfectly no matter what size your coupler is, and you can also use it without the tip or coupler.
SAFE AND EASY TO CLEAN: The tipless cream bag is made of food-grade material, safe and non-toxic, 200 pieces of disposable piping bags are cost-effective, can be thrown away after use, no need to clean, save your time.

Check Stock

200PCS Disposable Icing Piping Bags - 12 Inch Pastry Bag Frosting Bags for Cake Cookies Baking Decorating - Plastic Tipless Piping Bags

... piping bags can be used for cream cookie decorating, birthday wedding cakes, pastries, chocolate decorating, macarons, cake frosting, holiday desserts, sauces and adding decorative nice pattern details like stars and flowers to your baking desserts.
FITS ALL SIZES OF PIPE FITTINGS: You just need to cut the tip of the tube bag according to the size of the fitting, place the fitting in the bag, insert the piping bag and you're ready to decorate your dessert. Our piping bags fit perfectly no matter what size your coupler is, and you can also use it without the tip or coupler.
SAFE AND EASY TO CLEAN: The tipless cream bag is made of food-grade material, safe and non-toxic, 200 pieces of disposable piping bags are cost-effective, can be thrown away after use, no need to clean, save your time.

Check Stock

SMC KM11-07-11-6 PBT Push-To-Connect Tubing Manifold, 2 Inlets-3/8\

Port A One-touch Fitting, Port B One-touch Fitting.
One-touch fittings give the most efficient operation.

Check Stock

Jienk 5Pcs Bulkhead Union 3/8\ x 3/8\ Tube OD Push to Connect Tube Fitting, PMM-3/8 Pneumatic Quick Connect Air Fitting

【Bulkhead Design】Pneumatic Fittings is mainly used for air piping, pneumatic tools, do not need joint tools can realize the pipeline connecting or disconnecting the link. Excellent choice for through wall application..
【Durable】The body made of strong thermoplastic (PBT) housings and the ferrule adopts zinc alloy. Operating pressure 0~145 Psi, high pressure resistance, corrosion resistance and a long service life..
【Push Lock】Quick connect fittings easy to install and remove. Just one touch to connect the tube. The release ring adopts ellipse design, removed conveniently..
【Convenience】360°rotation. After installation, the tube direction can be changed easily. Help a lot with the alignment when piping the air line..
【Application】Working temperature range: 32～140°F. Most commonly used in the field for low-pressure hydraulic and pneumatic systems such as Shop Air, General Industrial, Maintenance and Automotive Assembly, Aircraft Controls, Printing, Packaging and Textile. As well as moving parts such as air ride, air horns and air suspension system..

Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock