Top Fitting Plastic Reviews

Cup Holster A Holster for Your Cup Holder Fits Jeep Dodge Ford Chevy Honda GMC

  • Springfield Armory: XD models (some minor fitting of the plastic where it meets the take down release is required for a proper fit).
  • FN 5.7: some minor fitting of the plastic where it meets the take down release is required for a proper fit.
Check Stock

RecPro RV Plumbing Fittings Wrench | Flair-It 16391 Plastic Wrench, 0.5\ Size

  • The Flair-it fittings create a connection that beats all other plumbing fittings on the market. They do not require a tool to install them, however, if you are applying them in a hard to reach area or if you would like some help in getting a grip on the screw cap, this plastic wrench is specifically designed to help..
  • With two ends for two different sizes of screw cap, this wrench can be used on all of the flair-it fittings. When you install the fitting with the wrench, it makes the process a bit easier, especially if you are placing the fitting in a low area or in an area that's hard to reach..
  • The wrench is made of the same high-quality white plastic and is durable and strong. There are identification marks above each of the two sides so that you can know the sizes of the screw caps for the two wrench sides. Helping you get a grip on the cap, this wrench is a handy tool when installing a flair-it fitting..
Check Stock

2-in-1 Drip Irrigation Tubing Hole Punch & Fitting Insertion Tool Kit for Easier 1/4' Inch Fitting & Emitter Insertion Drip Sprinkler Systems (Blue)

  • 2-In-1 Punch and Fitting Insert: The drip irrigation hole punch tool is designed to fit for drip tubing punch and 1/4 fitting insertion use.
  • Hold the handle of the drip irrigation tubing punch and clamp the tube, gently press it until the tube is pierced.
  • The hole size is 4 mm/ 0.12 inch to ensure the proper insertion of the connector, fitting and emitter, making the installation more closely fitting..
  • Quality Material: Punch tools are maded made of high-quality plastic and metal, strong and durable, and the puncher has been polished so it will not become dull And can be used for a long time..
  • Application: This 2-in-one drip irrigation tubing hole punch & fitting insertion tool can be used to puncture holes when installing drippers and micro-sprinklers in polyethylene tubing..
  • Easy to Use: Simply press the tool through the tubing and then remove the punch tool with a pre-punched hole left.
  • Insert the fitting into the tubing, then slide the tubing according to the slot and push the fitting into pre-cut hole..
  • Humanized Design: The smartly designed fitting insertion tool will make you feel untired even after using it for a long time.
  • It can help you drill easily and fast and save time and energy for you.
  • The combination of blue and black color makes the dr....
Check Stock

Tremble Tremble

  • CHILL ALL DRINKS: The large 2.5" sphere size is perfect for your favorite low- or highball glasses. Globes chill drinks quickly without melting for a....
  • KEEP DRINKS COLD LONGER: Avoid watery drinks by using these large, slow-melting cubes to chill your drink. Large cubes melt slowly to prevent diluting....
  • TIGHT-FITTING LID: Tight-fitting lid seals out odors and allows stacking. Lid creates a seal by fitting into the lip of silicone, and the stable base....
  • CREATE SOPHISTICATED COCKTAILS: Create spherical ice for a distinctive, unique look for your favorite cocktails. Also great for iced tea, cold brew....
  • ENJOY WITHOUT WORRY: The sturdy plastic construction, leak proof design, and water fill line make this ice tray easy to use for anyone. The durable,....
Check Stock

Wolfride 50 Sets Cam Lock Nuts and Cam Screws Furniture Connecting Cam Fitting with Dowel

  • Dowel Material: galvanized iron and plastic.
  • Cam Fitting Material: zinc alloy nickel plating.
  • Clear thread, use its self-tapping screw to lock into the panel..
  • Suitable for the panel connecting of your furniture, thickness of wood panel ≥ 16mm..
  • Package Including: 50pcs x Cam Fitting, 50pcs x Dowel.
Check Stock

Diversitech A/C Secondary Plastic Condensate Drain Pan 30 x 30 Black 6-3030L

  • PLASTIC DRAIN PAN: Perfect for collecting condensate from cooling and evaporator coils to prevent damage in any indoor location where overflow from....
  • DURABLE CONSTRUCTION: Made of ABS plastic with rolled edges, reinforced corners, and a ribbed bottom for strength and rigidity.
  • SEAMLESS DESIGN: Constructed without seams to ensure there is no leakage or rust, even with continued use.
  • PVC FITTING INCLUDED: 3/4" diameter PVC discharge fitting is included with each pan for your convenience.
  • IDEAL SIZE: Measuring 30" x 30" and 2" in depth, this drain pan is the perfect size for your A/C unit.
Check Stock

Holdup Brand No-Show undergarment side-clip style Suspenders with no-slip Gripper Clasps

  • 1 1/2" wide all black trucker style patented undergarment suspenders with black strong composite plastic Gripper clasps.
  • Hidden soft black suspenders made to wear under any loose fitting shirt with shorts or pants.
  • Attaches with just 2 no-alarm patented composite plastic black clasps.
  • Super soft dense weave 1 1/2" wide elastic USA made straps with smooth Hook and Loop (no bulges) length adjustment system.
  • Side-clip all black trucker comfortable hidden suspenders worn under any loose fitting shirt or blouse.
Check Stock

Holdup Hip-Clip Style Under-Ups with the Patented Composite plastic Gripper Clasps (Black 1 1/2')

  • 1 1/2" wide all black trucker style patented undergarment suspenders with black strong composite plastic Gripper clasps.
  • Hidden soft black suspenders made to wear under any loose fitting shirt with shorts or pants.
  • Attaches with just 2 no-alarm patented composite plastic black clasps.
  • Super soft dense weave 1 1/2" wide elastic straps with smooth Hook and Loop (no bulges) length adjustment system.
  • Side-clip all black trucker comfortable hidden suspenders worn under any loose fitting shirt or blouse.
Check Stock

Class A Customs | One (1) RV Fresh and Gray Water 30 Gallon Tank | T-3000

  • 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Fresh or Gray Water Storage.
  • WATER TANK MEASUREMENTS: 34.5” Longest Length (not including fittings) x 12” x 17.5” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
  • TANK BUILT-IN TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
  • NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
Check Stock

Joywayus 3/8\ Tube OD Brass Ferrule Fittings Compression Sleeves Brass Compression Fitting(Pack of 50)

  • Size:3/8" Tube OD. Package included: 50pcs Compression Ferrule Sleeve. It is packed in plastic box to avoid product damage..
  • This Metals sleeve compression tube fitting is made of brass, connects to a tube, and is suitable for use with fuel and gas systems..
  • Sleeve for a tube compression fitting.Connects to copper, brass, aluminum, or plastic tubing. No flaring tool required for assembly..
  • 3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C).
  • These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..
Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

  • ☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
  • ☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
  • ☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
  • ☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
  • ☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..
Check Stock

Mars 11917

  • Panel-mounted, barbed fitting allows tube connection on the side of a barrier.
  • Fitting connects to tubing on one end and a female connector on the other.
  • Acetal copolymer plastic for low moisture absorption and high tensile and flexural strength.
  • Buna-N O-ring elastomer seal for long cycle life and repeatable, leak-free connection.
  • Single-barb for increased pull-off resistance compared to three-barb styles.
Check Stock

Camco 11360 24"ID Plastic Drain Pan

  • Durable plastic pan will not rust, corrode or crack.
Check Stock