Hide A Hose Central Vacuum White Inlet Kit with 40 Foot Hose
- Central Vacuum 2x2 Fitting adapts for 2" Schedule 40 Plumbing Pipe.
Top Fitting Pipe Valve Reviews
PEX Ice Maker Installation Kit – 25 Feet of Tubing For Appliance Water Lines With Self Piercing Saddle Valve For Quick Installation, 1/4” Compression Fittings, Flexible Hose For Potable Drinking Water
- COMPLETE ICE MAKER WATER LINE KIT: Crosslinked high density polyethylene, PEX, hose is extremely durable. It won’t corrode and can’t be damaged from expansion or contraction. Easily withstands temperature and pressure stresses that occur in water systems. Flexible, one piece design includes 1/4” compression fittings at each end. Perfect for refrigerator, freezer, humidifier and water filter connections..
- INSTALLS IN MINUTES AND LEAVES NO ODORS OR BAD TASTE: Complete your maintenance or fix your appliances quickly and easily without the hassle of shutting off the water. This kit is designed to get the job done fast without inconveniencing yourself or other members of your household. The self piercing saddle valve quickly and neatly penetrates your pipe to divert the water where you want it to go..
- LEAD FREE COPPER CONSTRUCTION allows you to safely use this saddle valve for your ice makers, humidifiers, water filters and other potable drinking water applications. The saddle valve can pierce copper pipes 3/8” to 3/4″. There is no need to turn off your water when connecting copper, CPVC or PVC tubing. The saddle valve can also be used with steel or brass pipe but requires turning off the water supply and drilling a 1/16” hole..
Compression Sleeve Puller Tool Remove Ferrule & Nut Of Pipe, Ferrule Puller For 1/2” Copper Water Compression Sleeve & 1/2-Inch Copper Tubing, Plumbing Tools Compression Ring Removal Tool
- ...e puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This compression sleeve puller removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this tool and make your life easy. Designed by plumbing professionals. Precision machined plumbing tool..
- 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. Re-designed bullet nose will not pull off and is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a ferrule simple, and makes plumbing work simple..
- 【Work On Corroded & Frozen】Even such as the existing valve was severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe. Make sure the ferrule puller is properly aligned with the pipe, and then you are able to remove the nut and ferrule with maybe 10 turns of the handle. Easy and fa....
6.0 High Pressure Oil Pump IPR Valve Air Test Fitting Tool, High Pressure Oil Rail Adapters Leak Test Kit and 6.0 IPR Valve Socket with Seal Kit Fit for Ford 6.0L Powerstroke Diesel Engine
- Fitment: IPR Valve Air Test Fitting and Oil Rail Adapters perfectly fit for Ford 6.0L powerstroke diesel high pressure oil system.
- 6.0 IPR Valve Socket compatible with Ford 6.0L and other diesel engines, and Seal Kit fits for 2003-2010 Ford 6.0L V8 Diesel Turbocharged Modles.
- High Quality: High Quality Machined from Brass or Steel with excellent mechanical and physical properties, these tool kit show their high tightness, corrosion resistance and durability.
- Oil Rail Adapters: Both brass adapters use standard 1/4" NPT air hose connection, which allow observation of the High Pressure Oil System's Injector Control Pressure (ICP) by direct gauge connection, and facilitate testing of the High Pressure Oil System for leaks using shop air.
- IPR Valve Air Test Fitting : This tool has 1/4 inch pipe threads to accept standard air fittings.
- It takes the place of the IPR valve meaning that the system can be completely sealed so that even the smallest leaks can be detected.
- 6.0 IPR Valve Socket with Seal Kit: Use with 3/8" square drive, 12 point design socket can tightly locate your IPR valve in a very tight location, also built to bottom out on the hex so it does not put torque on the connector in case it can be reused (Include IPR Valve Seal Kit OE Number 3C3Z9H52....
STYDDI Solid Brass Rain Barrel Spigot, Quarter Turn Ball Valve Faucet with Heavy-Duty Bulkhead Fitting Adapter for Aquariums, Water Tanks, Tubs, Pools
- ... their valuable time to search for such a water spigot because here it is..
- ALL SOLID BRASS CONSTRUCTION FOR DURABILITY - This is a heavy-duty brass quarter turn water spigot, specifically designed for rain barrels. The all brass construction including solid brass bulkhead fitting makes it a excellent pick for long-term use. Coming complete with water-proof washers and solid brass nuts, which is perfect for DIY rain barrels or replacement applications..
- PACKAGE INCLUDED - This rain barrel spigot kit includes a 1-1/8 inch brass rain barrel quarter turn ball valve spigot and a 3.14 oz brass bulkhead fitting with 1-1/8 inch female thread. The thread of the water spigot input is 1/2" NPT Male, while the output thread is 3/4" GHT Male compatible for any garden hoses. It also comes with a seal tape and two water-proof washers..
- TWO INSTALLATION METHODS AND TOOLS NEEDED - The brass bulkhead fitting can be front mounting or back mounting. When installing, a electric drill is needed for drilling a 1-1/16 to 1-1/8 inch diameter holes, and also need a pipe wrench or adjustable wrench. This kit suits for rain barrels whi....
LASCO 19-5513 Straight Ball Valve Compression Fitting with Integral Sleeve Nut, 3/8-Inch OD Tube and 3/8-Inch Female Pipe Thread, Nylon/Plastic
- Nylon compression fitting with integral sleeve nut.
- 3/8-inch od tube x 3/8-inch female pipe straight valve.
- No need to disassemble fitting, just loosen the nut insert tubing, then tighten.
- Use on copper, PEX, poly and aluminum tubing.
Holley 26-501 Analog Vacuum Gauge
- Determines the correct power valve to use.
- Features a white face, black digits and pointer, and chrome bezel.
- Diameter measures 2 with a 0.125 pipe thread brass fitting.
- Mechanical sending unit helps check fuel pressure.
Compression Sleeve Puller Tool Remove Nut & Ferrule Of Pipe 03943, Sleeve Remover For 1/2” Compression Fittings Only, Corroded & Frozen Supply Stops, Plumbing Tools Compression Ring Removal Tool
- ...ssion sleeve puller removes leaking compression sleeves without damaging walls, which effortlessly pulls the nut and ferral off of the pipe. This sleeve remover removes 1/2-inch copper water compression sleeve. If you are in need of replacing a quarter turn valve on a dishwasher, sink or toilet that has compression fittings, buy this sleeve remover tool and make your life easy. Precision machined plumbing tool..
- 【Not Need To Cut Off The Pipe】Saves a lot of time around cutting old pipes. This puller tool is easy to use in relatively tight spots. Especially if you don’t have sufficient exposed copper to cut off the old compression fitting, this angle stop puller will effortlessly remove the old compression ring and reform the previously crimped copper pipe back to a perfect circle. No damage to the copper. Makes removing a nut and ferrule simple, and makes plumbing work simple..
- 【Work On Corroded & Frozen】Fully machined body and screw, this ferrule puller is durable, corrosion resistant & wear resistant. Even such as the existing supply stops are severely corroded or frozen, you can turn the lever to extract the old compression sleeve from the pipe..
- 【Easy & Fast Remove】1.Remove the old compression fitting or the old angle stop. 2.Put the nu....
Minimprover 2 Pack Brass 1/2 Inch FIP x 3/8 Inch OD Compression Quarter Turn Straight Water Angle Stop Valve Shut Off
- ★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead..
- ★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting..
- ★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F..
- ★ Shut-off angle stop valve for faucets and toilets. Brass ball mechanism provides easy for operation..
- ★ Package include: 2 PCS 1/2" FIP x 3/8" inch OD compression Valve. Comes with 1 year warranty..
12mm Check Valve, Plastic Inline Check Valve, One Way Non Return Check Valve for Water Fuel Gas Liquid Air
- 【SAFE MATERIAL】: Medical grade material, safe and nontoxic, perfect for water pipe fitting..
- 【ANTI-RUST】: Strong resistance to acid, alkali, salt corrosion ability, can be used for different types of liquid..
- 【WORK UNDER 100 】: Non-return one-way air water gas check valve can work under 100 , can be used to deal with most kinds of liquid for its good formability..
- 【STABLE】: High adsorption properties, thermal stability, chemical stability, has high mechanical strength, etc.
- 【WATER CHECK VALVE SIZE】: Diameter:22mm, Total Length: 63MM..
PERRIN Blow-Off Valve Kit Red Compatible with Subaru WRX 2008-2014
- This plug is perfectly suitable for F150 2013-2021 and for Expedition Ecoboost Engines 2015‑2021. Perfectly matched, it is a perfect substitute for old or damaged discharge valve plugs..
- Using this discharge valve plug allows you to discharge hot pressurization to the atmosphere, lower the inlet temperature and improve overall performance throughout the operating range. You can have a clean exhaust valve sound and better performance without recirculating hot air and introducing unwanted heat into the engine..
- The drain valve plug is easy to install and easy to use. There is no need to install any tools, and the installation can be completed quickly within 15 minutes. First find the blow valve pipe joint, rotate the coupler to remove the blow pipe, then disconnect the BOV hose from the intake pipe, and install the VTA MOD into the pipe before the exhaust valve..
- This VTA mod allows you to vent the hot boost to the atmosphere instead of recycling it and creating much hotter inlet temperatures. This will lower inlet temperatures and improve overall performance throughout the operating range..
- The best part is you can have clean blow off valve sound and know you have the best performance without recycling HOT air and introducing unwanted heat into the engi....
LubriMatic 30-114 Continuous Flow Air Operated Grease Gun
- Continuously pumps grease while trigger is depressed.
- 2-way loading: 14 oz. cartridge or suction load.
- Head cap port for adding air bleeder valve or bulk loader fitting.
- Capable of 3-way loading: 14 ounce cartridge bulk or suction.
- Recommended inlet pressure 90 PSI and dispenses 5 ounces per minute.
11025 1 1/2' Diesel Installation Kit, Compatible with Gravity Fueled Auxiliary Fuel Tank, Only for Diesel
- 1. Valve Shut Off to Avoid Overflow of Gas from Fuel Tank.
- 3. Kit includes accessories, hoses and clamps.
- 4.Provides Consistent Gravity Feed of Fuel.
- 5.Designed to Work with 3/8-Inch Female Pipe Thread Drain Fitting.