Top Fitting For Pump Reviews

220V Self Priming Water Pump Pressure Switch Automatic Pressure Controller Black

  • What you will get: you will receive 1 piece of 2 inch, 1/4 inch NPT water pump pressure gauge, 1 piece of 1/4 inch NPT female thread 1/2 inch male threaded brass fitting and 1 piece of tape, a total of 3 accessories for swimming pool pressure gauges, they are indispensable accessories for swimming pools and other equipment.
  • Clear and accurate reading: this water pump pressure gauge has a clear surface and accurate reading, it can provide accurate readings in the range of 1 to 100 psi and 0 to 7 bar for pumps, it is equipped with a 2 inch dial, is a practical tool for detecting water pressure.
  • Reliable material: this pump pressure gauge and 1/4 inch NPT internal thread x 1/2 inch external thread joint are made of brass, not easy to wear, comfortable texture, durable, the surface of this gauge is made of plastic which allows you to see clearly to the reading and pressure range, and use the tape when installing the pressure gauge to prevent leakage.
  • Brass fitting size: NPT thread size is the correct size and does not represent the actual diameter, 1/4 inch NPT internal thread x 1/2 inch external thread brass fitting can be applied to connect the pressure gauge, it is ideal to use the tape to make installation more stable.
Check Stock

mistcooling High Pressure Misting System 1500 PSI - Flexible (60 Feet - 20 Nozzles)

  • ...ure Switch or no cut off water switch will turn pump off, if no water supply - Thermal Safety Swithc - Maximum Speed 1800 rpm - Full load Amps. (0.15/ 0.30 gpm.) 1.38/ 2.00 Amps - Noise level: 75 DB - Maximum Inlet Pressure–100psi.
  • Filter: - 5 Micron Filter - Filter in the package comes with 3/8 inch inlet- outlet fitting. - Standard pump comes with ¼ inch push lock type fitting.
  • However, it is placed on 3/8 inch male and ¼ inch female adapter. - Outlet comes with ¼ inch fitting as standard.
  • however, depending on package requirement it can be modified to 3/8 inch. - Scale free filters can also be added to mist systems to prevent clogging of nozzles due to hard water..
  • Tubing - ¼ Inch OD Tube - Rated for 1500 PSI - Nylon Tubing - UV Treated - Available in Black, White, Beige and Grey Colors.
  • Fittings - ¼ Inch - Push Lok – Push to Connect - Nickel Plated - Rated for 2000 PSI - Re-Usable - Misting Tee comes with 10/24 threads - End Plug – Simply connect it to the misting Tee. MC13040-MC13041.
Check Stock

mistcooling 160PSI Misting Pump (220 V-AC)

  • Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Check Stock

mistcooling 250 PSI Misting Pump

  • Max pressure 250 psi Available in 110 V, 220 V & 12 VDC Durable Rust Proof Enclosure Thermal Safety Switch Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps Standard pump inlet: 3/8-inch push lock Fitting. Standard Pump outlet: ¼ inch Push-lock fitting. Max pressure 250 psi 110 V AC.
  • 1. Solenoid Valve Solenoid valve controls the flow of the water in to the pump. You may leave the inlet water source on at all the time. Water will enter the pump only when main power switch is turned on. Likewise, water flow will be cut off when power switch is turned off. No adjustment is ever required for solenoid valve..
Check Stock

10ft Gas Siphon Hose Pump Shaker Siphon for Gasoline Fuel Water Transfer Safe Multi-Purpose Self Priming Pump 10FT High Grade Hose 1/2" Valve

  • 【High Quality】A ABIGAIL hand Transfer Siphon Pump is made of kitchen-grade anti-static PVC tubing which provides easy reach into containers, petrol resistant, avoid corrosion. It features a 2.5mm (1/10 inch) thick hose wall, a 6 foot long tube, and a high-quality brass fitting..
  • 【Multi-Use】This siphon hand pump is ideal for emergency gas transfer, it can transfer any liquids like gasoline, oil, diesel, water, beer and so on. A good tool at home for multiple usage. You never have to start the siphoning process with your mouth again, it's extremely dangerous and grossly inefficient..
  • 【Safe Notice】This siphon pump for gasoline not for use on salt water or copper corroding chemicals. When you put fitting end into the container( you are siphoning from), must keep it inside of the container not just on the surface and the fluid you are trying to get rid of has to be up HIGHER than the bucket you are flowing into..
  • 【Easy to Use】The Siphon Pump is easy to use, No more sucking on tubes that can put you in contact with dangerous fumes and liquids - simply insert the brass valve into the container to be siphoned from, shake it in an up and down motion, and the liquid will begin to flow! To stop the flow, remove the fitting end from the liquid. Ligh....
Check Stock

Gas Siphon Hose Pump Shaker Siphon for Gasoline Fuel Water Transfer Safe Multi-Purpose Self Priming Pump 6 Foot High Grade Hose 1/2' Valve

  • 【High Quality】This hand Transfer Siphon Pump is made of kitchen-grade anti-static PVC tubing which provides easy reach into containers, petrol resistant, avoid corrosion. It features a 2.5mm (1/10 inch) thick hose wall, a 6 foot long tube, and a high-quality brass fitting..
  • 【Multi-Use】This siphon hand pump is ideal for emergency gas transfer, it can transfer any liquids like gasoline, oil, diesel, water, beer and so on. A good tool at home for multiple usage. You never have to start the siphoning process with your mouth again, it’s extremely dangerous and grossly inefficient..
  • 【Safe Notice】This siphon pump for gasoline not for use on salt water or copper corroding chemicals. When you put fitting end into the container( you are siphoning from), must keep it inside of the container not just on the surface and the fluid you are trying to get rid of has to be up HIGHER than the bucket you are flowing into..
  • 【Easy to Use】The Siphon Pump is easy to use, No more sucking on tubes that can put you in contact with dangerous fumes and liquids – simply insert the brass valve into the container to be siphoned from, shake it in an up and down motion, and the liquid will begin to flow! To stop the flow, remove the fitting end from the liquid. Light....
Check Stock

HEYTUR Inflatable Boat SUP Pump Adaptor Standard Schrader Conventional Air Pump Air Valve Adapter Spoke Plate Attachment(Black)

  • The HEYTUR inflatable stand up board valve adapter will allow you to connect any standard electric pump, foot pump or compressor to the schrader valve fitting, the standard valve for car and bicycle tires..
  • It works on the majority of inflatable stand up boards. It is also suitable for boats and kayaks which also use the Halkey-Roberts valve for inflation.Use your compressor or tire pump to easily reach 20 PSI.Be very careful not to over inflate your board or craft, and check the board's pressure frequently..
  • This is an adaptor only. The speed at which your board inflates will depend on the pump used.Because the compressors/tire pumps take time to inflate, it is recommended to inflate the board by hand hand pump until it becomes difficult to pump, and then use the adaptor to top off the pressure..
  • Remove your SUP valve cap and ensure that the valve is sealed for inflation by rotating the central pin into the outer/closed position.Insert the valve adapter into the SUP valve the same way as you would insert the pump hose nozzle. Connect any standard schrader pump to the valve adapter fitting to inflate your board. Monitor board pressure frequently while inflating!.
  • If you have any problems, please contact with us directly. Simply e-mail us the problem, the....
Check Stock

mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)

  • Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
  • Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
  • Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
  • Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
  • Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
Check Stock

Aquascape Dual Union Check Valve 2.0 for Pond, Waterfall and Water Feature Pumps | 48026

  • The innovative AquascapePRO Dual Union Check Valve 2.0 provides a professional pump and plumbing connection inside skimmer filter systems, as well as Pondless Water Vaults..
  • The heavy-duty, swing-style check valve flapper maximizes water flow through the valve when open, while preventing the backflow of water when the pump is shut off or during a power outage..
  • Union connections on both both sides of the valve make pump and filter maintenance quick and easy without the use of tools..
  • Height extendable for larger filters and pumps. Height extendable for installation taller filters.
  • (2) - 2" MPT x 2" Slip Fitting, (1) - 1.5" FPT x 2" Slip Fitting.
Check Stock

SHURFLO (244-3926 Elbow Adapter

  • Wingnut Swivel, Nylon: Pump head fittings included with each pump.
  • 1/2 inch x 14 Male Pipe Thread (F) x 1/2 inch Barb, Elbow Fitting.
Check Stock

Kyostar 380LPH High Pressure Fuel Pump Inline Fuel Pump E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet

  • Extemally Mounted in rear center of the car or truck.
  • Can be installed along with a high performance walbro intank fuel pump or alone..
  • Dimension: Length: 125 mm (main body) 146 mm (fitting seat to fitting seat).Diameter: 60 mm. Inlet : M18x1.5 Metric.Thread Outlet : M12x1.5 Metric.
  • The Fuel Pump Flow and pressure: 370 LPH at 3 Bar (45 PSI),340 LPH at 5 Bar (73 PSI) 8 Bar max..
  • Inline Fuel Pump Current draw: 9 Amp at 3 Bar, 13.5 Amp at 5 Bar..
  • Kyostar 044 Style 380LPH High Pressure Inline E85 Compatible Fuel Pump Universal Replace Fit for AN10 Inlet/ AN8 Outlet.If you have any question about our product,please contact us right away..
Check Stock

Raincovo Chemical Injector Kit, Soap Injector for Pressure Washer, 1/8 Inch 27 Male BSP Thread

  • Chemical injector kit fits most pump which is an OEM brand. Replaces pump 203640GS 308452002, 190593GS and 190635GS..
  • Soap injector makes cleaning so much easier and faster. It’s a great replacement for the old rusted one..
  • The brass fitting is a 1/8 inch 27 male BSP thread. Install them and the soap dispenser works just like new..
  • How to install: Take the brass fitting, drop in the little ball, insert spring with small end against the ball, then attach it back on the pump. Do not over-tighten otherwise it will snap off..
  • Kit includes 2 pieces fittings, 2 pieces small balls, 2 pieces springs, 2 pieces o-rings outside and 4 pieces inside..
Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

  • ...age: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
  • Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.
Check Stock