Top Fitting End Reviews

iMopo 70 Pack Drip Irrigation Universal 1/4 Barbed End Plug Fittings Barbed Connectors for Drip or Sprinkler System

【Great Value】：Comes with 70 pieces barbed end plug fittings in total,enough to meet your daily use..
【DURABLE MATERIAL】：Made of high-impact,UV-resistant and chemical-resistant materials,durable and reliable to assure a long life using time..
【BARBED DESIGN】：Barbed end plug fittings tight fits universal 1/4" drip tubing,barbed design ensures the tubing will not slip and leak..
【EASY TO INSTALL】:Barbed end plug fitting is easy to be installed without glue, tools, or clamps.Push the tubing firmly over the end plug fitting.Warm tips:Put the tubing end into 75°~85° hot water 10 seconds before pushing them..
【FOR WIDE APPLICATIONS】:Barbed end plug fittings are Great for use with raised garden beds,lawn,greenhouse gardening and agricultural watering applications..

Check Stock

M MINGLE Pressure Washer Adapter, Metric M22 15mm Female Thread to M22 14mm Male Fitting, 4500 PSI

ATTENTION: CONVERT METRIC M22 15MM FEMALE TO M22 14MM MALE. M22 14mm fitting is compatible with Generac, Simpson, Briggs Stratton, craftsman, karcher, Ryobi pressure washer. M22 15mm fitting is compatible with Sun Joe, Campbell, MI-T-M, AR Blue, Stanley, Cleanforce, Simoniz, Excell power washer..
If not sure which fitting on the pressure washer accessory, please measure the outsize diameter of inside plug at the female end or measure the inside diameter of male end. If 14mm, it is M22 14mm fitting. If 15mm, it is M22 15mm fitting. Pressure washer coupler connects power washer gun to hose, hose to pump..
If leakage, please put teflon tape on the male threads of your wand or other products..
Made of high quality brass, resistance to corrosion. Working pressure is up to 4500 PSI.
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

Attwood 93806MUSD7 Mercury Fuel Line Kit, 6 Feet Long, 3/8-Inch Diameter, Multi-Layer Low-Permeation Primer Bulb

Reliably delivers fuel to your Mercury engine.
Includes 6-foot-long, 3/8-inch diameter low-permeation fuel line.
Line is designed to prevent kinking and hardening, and is rated up to 100 degrees C.
Comes with tank fitting 8838TM6, tank end hose fitting 8838HF6, and engine end hose fitting 8896LP6.
Multi-layer, low-permeation primer bulb with connections engineered for strength, durability, and leak resistance.
Kit is compatible with Ethanol blended fuels.
For use with Mercury brand engines and tanks.
Male Universal Sprayless Connector (USC) tank fitting included.

Check Stock

SUSPA C16-04270 Gas Spring (set of 2)

Package Content: 5Pcs x Gas Spring End Fitting.
Gas Spring Strut Joint connector End Fitting..
It is a good replacement of gas springs Ball Strut, and the gas springs are motion control devices for lifting, holding, counterbalancing, and providing support for applications such as horizontally hinged doors, lids, hoods and canopies..

Check Stock

Polaris Ranger Fuel Line Assembly, Genuine OEM Part 2521226, Qty 1

Durable, flexible, long lasting fuel line.
Gray color helps reduce potential for vapor lock on warm days and exposure to sunlight..
Includes quick disconnect fitting at engine end and 1/4" NPT threaded fitting at the fuel tank end..

Check Stock

Flexzilla Polyurethane Recoil Hose 1/4 in x 15 ft ZillaGreen - LP1415AFZ

EXTREMELY FLEXIBLE - All weather flexibility (-40° to 165°F) resists kinks and coils easily.
EXTREMELY DURABLE - The polyurethane construction of the recoil hose will not brittle over time Polyurethane is more flexible than nylon, and has....
TANGLE-FREE RECOIL - Polyurethane has better recoil memory than nylon, and will not tangle when done with use. Polyurethane is also more flexible than....
120 POUNDS PER SQUARE INCH - Maximum working pressure at 70 degrees F. Product Dimensions - 180 x 0.25 inches.
REUSABLE END FITTINGS - 1/4 in. MNPT reusable ends. Tool End: 16 in. tail with swivel fitting. Compressor End: 8 in. tail with rigid fitting.

Check Stock

Flexzilla Polyurethane Recoil Air Hose, 1/4 in. x 10 ft, ZillaGreen - LP1410AFZ

EXTREMELY FLEXIBLE - All weather flexibility (-40° to 165°F) resists kinks and coils easily.
EXTREMELY DURABLE - The polyurethane construction of the recoil hose will not brittle over time Polyurethane is more flexible than nylon, and has better recoil memory. Safety factor-3:1.
TANGLE-FREE RECOIL - Polyurethane has better recoil memory than nylon, and will not tangle when done with use. Polyurethane is also more flexible than nylon.
120 POUNDS PER SQUARE INCH - Maximum working pressure at 70 degrees F.
REUSABLE END FITTINGS - 1/4 in. MNPT reusable ends. Tool End: 16 in. tail with swivel fitting. Compressor End: 8 in. tail with rigid fitting.

Check Stock

attwood 93806ELP7 Fuel Line Kit — for Johnson and Evinrude Engines, 6 Feet Long, 3/8-In. Diameter, with Hose Fittings

Reliable replacement for original equipment.
For Johnson and Evinrude engines and tanks.
Includes 6-foot-long, 3/8-In. diameter fuel line.
Includes two (2) 8889LP6 hose fittings for tank end and engine end.
For use with Johnson/Evinrude brand engines and tanks.
Male Universal Sprayless Connector (USC) tank fitting not included.
Female 8889LP6 hose tank fitting included.

Check Stock

Spears 447 Series PVC Pipe Fitting, Cap, Schedule 40, 2' Socket

【Apply To】Cap for closing the end of 2" pipe or fitting, which outside diameter of 2.374". Socket end for connecting to unthreaded pipes or fittings..
【Material】6 pcs Heavy Duty 2 Inch PVC Pipe End Cap Fitting Made of high-quality PVC, high-impact strength, resistant to frost and corrosion, long service life..
【Easy Installation】They are non-toxic, lightweight and easy to install. Installation requires the use of primer and solvent cement..
【Wide Application】Furniture-Grade Parts, suitable for indoor and outdoor use.
Pressure Fittings are used in irrigation, underground sprinkler systems, swim pools, outdoor applications and cold water supply lines, etc..
【Use with Confidence】Meets ASTM D2466 and D1784 standards, comply with NSF requirements..

Check Stock

2H7-14988-00 Karbay Carburetor Carb Brass Fuel Tee Fitting for Yama-ha Fj600 Xs750 Xs1100

For CARBURETOR FUEL TEE FITTING 2H7-14988-00 FITTING & 1J71498800.
Measures: 37mm (end to end with 9.5mm space in center) X 9mm Diameter (o-ring slightly larger).

Check Stock

Ham-Let Stainless Steel 316 Let-Lok Compression Fitting, Cap, 1/16\ Tube OD

Cap for closing the end of a pipe or fitting.
Fitting connects to tubing on its open end.
Type 316 stainless steel for higher strength and greater corrosion resistance than type 304 stainless steel.
Operating temperatures range from -100 to 1000 degrees F.
Meets ASTM standards A213 and A269 for quality assurance.

Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..

Check Stock

Sooprinse Pressure Washer Wand,Stainless Steel Quick Connect Lance,Replacement Spray Wand,16",5000PSI

❤【High Pressure】5000 PSI high pressure power washer gun extension wand, brass fitting.ATTENTION：The end of the wand is M22 14. Make sure that the head of your pressure washer gun is this size. It can not be extended, the other end is 1/4 quick connection, mainly used to connect the nozzle..
❤【Perfect Size】16 inches stainless steel replacement lance.
❤【Quick Connect】1/4 inch stainless steel quick connect outlet fitting for easy attachment of spray tips and other accessories.
❤【Widespread Use】Can be used on both gasoline and electric pressure power washers.Universal fit for metric pressure washers, hoses, M22 Metric thread inlet fitting.
❤【Quality Assurance】With 3 years product warranty .Any problem,feel free to contact us.The professional team is always ready to serve you..

Check Stock