Top First Alert Z Wave Rings Reviews

KAIPULE Z-Wave Plus Wireless Door and Window Sensor - Compatible with Samsung SmartThings - White

  • COMPATIBLE with the follwoing Z-WAVE Plus Home Automation HUBs: SmartThings, Fibaro, HomeSeer and Vera...
  • EASY INSTALLATION: Takes only moments to install the wireless device and Easily pair with Z-Wave HUBs..
  • SMART HOME. Apply in different scenes to make it part of your Smart Home System or Home Protection System..
  • RELIABILITY. Anti-tamper Alert, Real- time Battery power level monitoring, Lower consumption (2 years battery working life)..
  • 2 YEARS BATTERY LIFE: With 2 hign capacity AAA battery powered(replacable).Ultra-low power consumption and extra-long standby time.
Check Stock

SCHLAGE FE599NX CAM 619 ACC 619 Home Keypad Lever with Nexia Home Intelligence, Satin Nickel

  • Works with Alexa for voice control (hub required, Alexa device and hub sold separately)..
  • Receive text or email alert when your family uses their codes, so you know who's home.
  • Grant access to your home when you can't be there with a scheduled code to let someone. Codes: Pre-set, unique 6-digit programming code, two pre-set unique 4-digit access codes, 19 code capacity.
  • Add, delete or change user codes remotely. Back set: Universal latches and deadbolts fit 2.4 inches or 2.75 inches back sets.
  • This Z-Wave enabled product allows for wireless communication to other Z-Wave products in your home.
  • Door range: 1-3/8” to 1-3/4” (35mm-44mm) standard.
Check Stock

Aeotec Range Extender 6, Z-Wave Plus repeater

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, and Vera..
  • Z-Wave Plus certified. Certification number: ZC10-16095239DescriptionYou use Z-Wave to manage your smart home. You use Range Extender 6 to keep Z-Wave reliable. Aeotec's Range Extender 6 works seamlessly to amplify and repeat weak Z-Wave and Z-Wave Plus signals. Simply plug it into a power socket, connect it to your Z-Wave network, and it automatically starts improving any poor Z-Wave signals that are in range. As it's custom desgined as a wireless signal booster, Range Extender 6 performs better than other Z-Wave devices that offer simply repeating.
  • it amplifies the signal too. Designed to use Z-Wave Plus, unlike previous editions Range Extender 6 can work with advanced Z-Wave features such as encryption and security devices such as door locks while remaining compatible with older versions of Z-Wave. It repeats signals 250% faster than other signal repeaters and can repeat Z-Wave signals up to 492....
Check Stock

Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

Fibaro FGFS-101 ZW5 FGFS101ZW5 Flood Sensor, Z-Wave Plus Water Leak Detector-FGFS-101, White

  • The ultimate Z-Wave Plus water leak sensor/detector, with temperature and tilt sensor.
  • Get alerted on your smartphone/tablet/email, trigger certain lights, activate specific scenes, or even sound an alarm when water is detected.
  • Three 24K plated Gold telescopic feet always makes contacts with both even and uneven surfaces and never corrodes.
  • Built-in temperature sensor can alert you If there is a sudden rise or fall in temperature, which can help prevent damage due to frozen pipes.
  • Z-Wave Plus certified sensor with enhanced features such as longer battery life and better range: ZC10-16025007.
Check Stock

Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)

  • 4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately..
  • NEW 700 SERIES VERSION: The included CR123A battery makes the sensor lasts much longer than any previous version. Updated motion detection allows you to get even quicker activity reports. New Z-Wave chip for better performance..
  • CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion clear delay time, and pick from 3 different LED indicator modes (your hub needs to support advanced parameter input)..
  • SECURITY FIRST: This sensor is equipped with the latest S2 authenticated security and signal encryption. It's Z-Wave Plus 2 certified to ensure it complies with the highest industry standards. Supports SmartStart inclusion with a unique identifying PIN and QR code..
  • WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Hubitat, HomeSeer, Home Assistant, and compatible with SmartThings Hub..
Check Stock

HFS DC06 Microwave Radar Sensor Switch Module, 5.8G DC 5V Smart Motion Sensor Switch Board, Home Control Corridor Aisle Garage, etc

  • OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion. Keep away from direct rainfall and sunlight..
  • EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. New version (2.0) comes with advanced settings for motion sensitivity and lux reports if supported by your hub. Motion detection up to 20 feet..
  • COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo)..
  • SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mi....
Check Stock

GoControl WD500Z-1 Z-Wave 500-Watt Wall-Mount Dimmer Switch

  • Z-wave & Manual Control For Connected Lights.
  • White.This device requires a neutral connection.
  • Easily replace existing standard switch to add a Z-Wave controlled lighting dimmer. Compatible with any Z-Wave certified gateway.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Compatible with incandescent and most dimmable fluorescent, halogen, Xenon and LED fixtures and The wires are pre-cut for easy stripping..
Check Stock

GoControl/Linear GD00Z-4 Z-Wave Garage Door Opener Remote Controller, Small, Black

  • Go Control z-wave products provide up to 100 feet range between the wireless controller and/or the closest z-wave device.
  • Nortek security & control/Go Control has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg. . of z-wave products.
  • Garage door position sensor frequency: 345 MHz.
  • This product requires the use and pre-installation of a Z wave HUB..
  • Add Z-Wave control to your current garage door opener. Compatible with virtually any automatic garage opener w-sectional garage door.
  • Linear Z-Wave products provide up to 100 feet range between the wireless controller and/or the closest Z-Wave device.
  • Provides both audible and visual warnings prior to door movement.
  • Linear has been providing best-in-class home & business control solutions for over 50-years and is a leading worldwide mfg.. of Z-Wave products.
  • Specifications - Power: 120VAC, 50/60 Hz, Garage door position sensor frequency: 345 MHz, Z-Wave Frequency: 908.42 MHz.
Check Stock

Peanut Butter SmartSticks 3 Pack Bundle

  • LATEST Z-WAVE TECH: SmartStick+ Includes a 700 Series Z-Wave Module (v7.17x firmware) and is Z-Wave Plus V2 Certified.
  • SUPPORTS Z-WAVE S2 SECURITY: Includes Smart Start Inclusion (Requires Smart Start Compatible Hub or Software).
  • Z-FLASH COMPATIBLE: Works Nicely with HomeSeer Z-Flash OTA Firmware Updater.
  • Z-WAVE PLUS (V2) PERMORMANCE: Longest Range, Fastest Transmission Speed, Best Bandwidth.
  • SUPPORTS NETWORK BACKUP & RESTORE: Easily restore or move your network to another SmartStick+ (requires HomeSeer hub).
Check Stock

Zooz 700 Series Z-Wave Plus S2 USB Stick ZST10 700, Great for DIY Smart Home (Use with Home Assistant or HomeSeer Software)

  • READ BEFORE YOU BUY: The Z-Wave stick is for advanced users only, NOT for beginners. You must be comfortable with programming and have expert computer and Z-Wave knowledge to use this device..
  • S2 SECURE NEW 700 SERIES Z-WAVE PLUS: Take advantage of the new 700 Series Z-Wave with more range and S2 authenticated security protocol. It means that you can fully benefit from your S2 sensors, switches, and plugs running on the latest Z-Wave chip..
  • WHAT YOU NEED: This S2 700 Series Stick adds Z-Wave Plus capability to your DIY smart home set-up. You'll need a dedicated computer (PC, laptop, or Raspberry Pi, sold separately) and home automation software of your choice (not included) to complete the system..
  • ADVANCED Z-WAVE: Works great with the most popular software like Home Assitant (with JS), Indigo, and HomeSeer. Supports OTA firmware updates (works with Aeotec OTA firmware tool) and and all of the latest Z-Wave library commands..
  • SMART START: Supports the new quick and extra secure Z-Wave pairing method. Just scan the QR codes from any SmartStart Z-Wave Plus accessories to your home automation interface and power them on. They'll join automatically. Make sure your smart home software supports this feature..
Check Stock

Aeotec Range Extender 6, Zwave Extender, Z-Wave Plus Repeater, 2 Pack

  • Z-Wave Plus wireless signal repeater and range extender. Compatible with Z-Wave and Z-Wave Plus..
  • Amplifies and repeats weak signals boosting the range and reliability of weak Z-Wave devices..
  • Plug in to 110 volt wall socket. Small design so it does not block other outlets.
  • Compatible with all Z-Wave gateways including Control4, Fibaro, SmartThings, Vera and more..
  • Z-Wave Plus certified. Certification number: ZC10-16095239.
Check Stock

HomeSeer HS-DS100+ Z-Wave Plus Door/Window Sensor

  • 3 in 1 Zwave Sensor: Door and window sensor, temperature sensor and humidity sensor 3 in 1. Protect your home by detecting accidental opening/closing of doors, windows, cabinets and drawers. Check the battery level of the device, temperature and humidity through the app..
  • Safe and Reliable: Built-in Z-Wave 700 series, Z-Wave Plus V2, faster wireless speed, longer battery life and longer range than Z-Wave 500 series. SmartStart included, with standard S2 security features, is not only easy to install (auto-recognition via a quick scan of a QR code), but also secure..
  • Long-Life Battery: This smart sensor is powered by a CR2450 battery (battery included, no need to bring your own). The lifespan is 3 years. The sensor’s power saving mode extends battery life compared to other sensors..
  • Customized Events: Personalize how your Z-Wave devices talk to each other: when the front door is opened in the evening, automatically turn on the welcome lights. When a backdoor is opened unexpectedly, trigger a Z-Wave alarm siren..
  • Z-Wave Hub Compatibility: This z-wave door sensor works with certified Z-Wave gateways, Fibaro, SmartThings, Vera..
Check Stock