Top Finishing Materials Reviews

Baxton Studio 424-6895-AMZ Living-Room-Chairs, Brown

Mid-century modern style living room 1-seater lounge chair.
Materials: solid rubber wood, poplar, plywood board, rubber wood veneer, foam, faux leather.
Ships in several boxes, may ship separately.

Check Stock

Baxton Studio 424-6900-AMZ Living-Room-Chairs, Brown

Materials: solid rubber wood, poplar, plywood board, foam, faux leather.
Ships in several boxes, may ship separately.

Check Stock

GBJ 50PCS APMT 160408PDER YBG205 Carbide milling Inserts Cutting Tools Processing for Steel,Stainless Steel for BAP400R BAP300R Milling Holder

☞ YBG205 is the best choice for finishing on stainless iron parts, can make high-gloss surface. YBG202 has good wear resistance and toughness, suitable for finishing, semi-finishing, high-temperature alloy processing on steel ,stainless steel and carbon steel parts..
☞ Coating: Thick AL2O3 coating extends the life of the inserts working in high temperature. The first choice for steel processing from finishing to rough machining..
☞ Advantage: It has strong resistance to plastic deformation and edge strength.High-hardness processing, stable performance, sturdiness and durability.
☞ Feature: Precision processing, suitable for processing low carbon steel, stainless steel, viscous materials and non-ferrous metals..
☞Package includes: 50PCS APMT160408PDER YBG205 Carbide Milling inserts.

Check Stock

Zona 37-948 3M Wet/Dry Polishing Paper, 8-1/2-Inch X 11-Inch, Assortment Pack One Each 1, 2, 3, 9, 15, and 30 Micron

Quantity - 9 sheets of each grit: 1000/1200/1500/2000/2500/3000, 54 sheets in total..
Easy to Identify - The grits are marked on the back of the sandpaper for easy identification..
Size of Each Sheet - 9*3.6 inch / 23×9cm, long enough for hand using or placed on sanding block, also could be cut into any smaller size you need..
Materials - Made of silicon carbide and electro coated, ensures the grit distributed evenly, great for wet or dry sanding..
Widely Used - Great for automotive sanding, wood furniture finishing, metal finishing, plastic and glass finishing, etc..

Check Stock

Silicone Caulking Tools, 3 in 1 Caulk Finishing Tool Set, Sealant Grout Remover Scraper Tool, Stainless Steel Head, 5 Silicone Pads, Grout Removal Tool for Kitchen Bathroom Window Floor Sink Joint

Ideal Caulking Tool KitEasy combination caulking tools with 5 replaceable silicone pads, 4 Pcs sealant finishing and removal tools and a roll of textured tape helps repair the gap and clean residual glue, meet your various needs to beautify the room...
3 in 1 Caulk Finishing ToolOne caulk finishing tool set has 3 parts,including silicone smoother, flat angle scraper and internal angle scraper. It can easily repair gaps and clean residual glue and can be operated with one hand....
5 Replaceable Silicone PadsThe silicone pads can be replaced by gently pushing out the caulking tool. The caulking tools with 5 replaceable different radius covers(3R,6R,10R,13R, 17R) help you beautify and smooth out gaps..
4 pcs Sealant Remover and Finishing Tools 3 blue Multiple-edge caulk finishing tools and 1 blue rigid caulk remover can produce an excellent result on multiple materials. It makes caulking faster and cleaner even for a novice....
Wide Applications and Good ServiceCaulking applicator tool can be used for kitchen, room, bathtub, floor, window, corner, sink joint and so on. It is a good helper in cleaning glue and beautify the seam. For sure we will provide good service for each customer..

Check Stock

Brush Research GB Standard Duty Flex Hone for Block Cylinders, Aluminum Oxide, 3-1/2\ Diameter, 240 Grit (Pack of 1)

[QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
[DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
[FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
[CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
[ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..

Check Stock

Wagner Spraytech 0529013 Detail Finish Front End Kit, Fine, Applies a Fine Finish on Furniture, Cabinets and Trim, Use with most Wagner HVLP Sprayers

FINE FINISHING FRONT END NOZZLE: The Detail Finish Front End nozzle accessory provides a smooth finish without brush marks. This is perfect for fine finishing projects like trim, cabinets and furniture.
DESIGNED FOR WAGNER PAINT SPRAYERS: This nozzle attachment can be paired with Wagner HVLP sprayers including all FLEXiO Sprayers, PaintREADY Sprayer, PaintREADY Station, Control Painter, Control Spray Double Duty and Control Spray Max.
FOR USE WITH THIN COATING MATERIALS: Can be used with water or oil based materials such as paints, stains, sealers, and polyurethane coatings. Thinning may be required for thicker materials.
ADJUSTABLE PATTERN SETTINGS: This front end features an adjustable flow control knob for precise spraying to match your speed and project needs. The sprayer also features three spray patterns (horizontal, vertical, and round) to suit any project.
EASY TO ASSEMBLE WITH SPRAYER: Exclusive Lock-n-Go technology allows users to quickly change front ends for color changes and easy disassembly for clean-up.

Check Stock

KinRite 20 pcs Cutting Tools Indexable Inserts Turning Inserts DCMT32.51 DCMT32.52 Carbide Inserts for Metal Cutting Cutter bar 20pcs DCMT11

Pacake includs: 20pcs DCMT Inserts (5pcs brozun DCMT32.51 +5pcs yellow DCMT32.51 +5pcs brozun DCMT32.52 +5pcs yellow DCMT32.52).
55° Diamond shaped single sided TIAIN coating carbide turning inserts , mainly used for steel, stainless steel finishing, semi-finishing and rough machining..
DCMT32.51--Relief Angle : 0.4, DCMT32.52--Relief Angle : 0.8, Cutting angle: 55°, Blade length:11mm, 5/32" Thickness ,1/64" Radius, With chipbreaker.
With continuous processing function, Used for turning and finishing on a wide range of materials.
Macthing for SDJCR11 /SDXCR11 tool holders /boring bars.

Check Stock

Red Label Abrasives 6 Inch 800 Grit Adhesive Back PSA Auto Body Film Sanding Discs 50-Pack

Industrial grade materials designed for automotive (auto body paint), plastics, composites, fiberglass, marine refinishing and high gloss finishing.
Ideal for DRY finishing | Also great for general sanding.
Compatible with all PSA (stick on adhesive) sanders.
Premium Heat Treated Blue Aluminum Oxide (A/O) | Ultra strong polyester (PE) film material | Resin over resin bonding.

Check Stock

Red Label Abrasives 6 Inch 1200 Grit Adhesive Back PSA Auto Body Film Sanding Discs 50-Pack

Industrial grade materials designed for automotive (auto body paint), plastics, composites, fiberglass, marine refinishing and high gloss finishing.
Ideal for DRY finishing | Also great for general sanding.
Compatible with all PSA (stick on adhesive) sanders.
Premium Heat Treated Blue Aluminum Oxide (A/O) | Ultra strong polyester (PE) film material | Resin over resin bonding.

Check Stock

Brush Research BC Standard Flex Hone for Brake Cylinders, Hydraulics and Valve Guides, Aluminum Oxide, 3/4\ Diameter, 240 Grit (Pack of 1)

[QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
[DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
[FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
[CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
[ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..

Check Stock

Brush Research - GB418180AO GB Standard Duty Flex Hone for Block Cylinders, Aluminum Oxide, 4-1/8\ Diameter, 180 Grit (Pack of 1)

[QUALITY]- Proudly made in the USA. The FLEX-HONE is long lasting, lowering total cost of use compared to other brush options..
[DESIGN]- The FLEX-HONE is manufactured to be self-centering, self-aligning and self-compensating for wear for easy use..
[FINISHING BENEFITS]- Offered in a wide variety of grits and abrasives to allow machinists to achieve specific finishing tolerances as well as a beautiful crosshatch finish..
[CROSSHOLE DEBURRING]- Ideal for finishing and deburring simultaneously in a single setup. Can be used in virtually any rotating spindle..
[ALUMINUM OXIDE ABRASIVE]- Excellent on aluminum, brass, bronze, and softer non-ferrous materials. 240 AO is commonly used for deglazing Nikasil cylinders..

Check Stock

Real Milk Paint, Wood Wax for Wood Finishing, Unfinished Wood Furniture, Cutting Boards, Butcher Blocks, Food Grade, Vegan, 4 oz

WOOD WAX - Wood Wax for wood finishing. Great for finishing raw wood surfaces, providing a beautiful lustrous finish and protective surface..
MULTIPLE USES - Use the Wood Wax for finishing wood cutting boards, wooden bowls, butcher blocks, and chopping blocks. It’s ideal to seal over Milk Paint or wood furniture..
FOOD GRADE - Safe for food contact. A great penetrating oil formula for use on wooden kitchen items such as chopping boards..
WATERPROOF - Wood Wax can be used as a waterproof wood sealer. The Wood Wax helps seal and protect wooden surfaces, creating a satin, waterproof barrier..
NATURAL - A 100% natural wax made from plant-based materials, including walnut oil and carnauba wax, a vegan formula. VOC-free wood butter with no solvents or petroleum (mineral oil)..

Check Stock