Top Fine adjustable Machine Reamer Reviews

Hand Reamer, Bridge Pin Hole Handheld T Shape Tapered Hex Reamer Handle Drilling Tool 1/8\-1/2\ 3-13mm

  • 【HIGH HARDNESS AND DURABILITY 】This machine reamer Made of high speed steel, these reamers have high hardness and durability..
  • 【FUNCTION】 T-handle providing optimal leverage.Removable handle for compact storage..
  • 【WILDLY USED】Handle drilling tool is suitable for taper holes on top of planks, chamfering, easy screw sinking holes..
  • 【SIZE】 Length: Approx. 128mm / 5.0in(Tapered Reamer).
  • 【HIGH ACCURACY AND LONG SERVICE LIFE】 This machine reamer with Sharp cutting-edge, high cutting ability, high accuracy, long service life..
Check Stock

Taper Shank Milling Cutting Tool, Lathe Machine Reamer High Grinding Accuracy Flexible Carbide for Stainless Steel

  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
Check Stock

Taper Shank Milling Cutting Tool, High Grinding Accuracy Flexible Lathe Machine Reamer Refined Grooves for Cast Iron

  • Universal Shank Type: This reamer with glossy surface, widely used, universal shank type, and high grinding accuracy.
  • Integral One Time Forming: Integral one time forming reamer, with stable sizes, accuracy hardening, and durability.
  • Fine Grinding Grooves: Precise grinding grooves, high efficiency and flexibility, direct unhindered chip removal, beautiful and delicate, effective, labor saving, and fast drilling speed.
  • Application: This is a reamer, which is widely used for light cutting, repair work, destocking or only for enlarging holes.
  • Applicable Materials: Suitable for stainless steel, carbon steel, cast iron, die steel, alloy steel, tool steel, non ferrous metal materials.
Check Stock

2Pcs High Carbon Steel Straight Shank Morse Taper Reamer Rough + Fine Hand Reamer Set Replacement(MT2#)

  • HIGH QUALITY-- Morse Taper Reamer is made of high carbon steel, it is not easy to wear and has a long service life..
  • 2PCS-- Each set of two reamers, one rough and one fine, meets different work requirements..
  • APPLICATION-- Available in a variety of models to meet most daily work needs. A perfect replacement for the broken or worn one..
  • GOOD PERFORMANCE-- Morse Taper Reamer features fine workmanship, high precision, high cutting efficiency..
  • 5 OPTIONAL MADEL-- Optional Model: MT1#, MT2#, MT3#, MT4#, MT5#, meet your different requirements.
Check Stock

High Precision Industrial Grade Spiral Reamer 1:10 Hss Steel, Conical Handle Hinge Hinged Die Processing Tool 8 X 12 X 40mm

  • Shank diameter: 3,4,5,6,7,8,9,10mm, machining hole size and shape can be suitable for different componets.
  • Features: The sawing edge of the reamer set of the chuck machine is sharp, the sawing ability is strong, the precision is high, and the sawing is clean.
  • Easy to use: Straight shank machine reamers can be installed on drilling machines, milling machines, etc.
  • Application: The H8 reamer set can process the surface of metal materials such as iron, steel, plastic, wood, copper, aluminum, etc.
  • Durable: The reamer set is made of high-speed steel, with high hardness, good toughness and long service life.
Check Stock

RIDGID 10973 122XL Copper Cutting and Prep Machine, 1/2-inch to 4-inch Pipe Cutting Machine

  • Designed to cut, clean and deburr copper tubing and fittings (Types K, L and M).
  • also cuts and deburrs stainless steel tubing with a maximum wall thickness of 0.065 inches (1.65 mm).
  • Rugged cast aluminum housing and powerful 1/3 HP induction motor for long tool life.
  • convenient carry handle for easy transport.
  • Reamer removes burrs from inside of tubing and brush cleans external surface to prepare for joining.
  • machine also includes accessories to clean inside of fittings and clean burrs from outside surface.
  • Copper pipe cutter has an adjustable handle to accommodate different diameter tubes and a handy built-in 1/2-inch (12 mm) incremental scale for quick and easy measuring.
  • Includes outside diameter cleaning brush, cone reamer, outside diameter deburring disk, fitting brush kit and operator's manual pack.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

31/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56020, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56009, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

5/8\ Expansion Reamer, Carbide Tipped, Tapered Shank, 56059, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • Morse taper shank #2, For Reaming Abrasive Material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock