Top Fine Pitch Thread Repair Kit Reviews

Nes NES1025 Universal External/Internal Thread Repair Kit NES1A, 2, 21, 22, 23, 24, 6-Piece , Orange

  • UNIVERSAL THREAD REPAIR TOOLS - one hand tool repairs inch or metric, right or left handed, coarse or fine threads.
  • QUICK SIZING - no need for a caliper or pitch gauge to determine diameter or thread count or type.
  • RAPID ADJUSTMENT - tool adjusts and quickly adapts to particular diameter and pitch of fastener thread.
  • HOW TO USE - automatically chases good threads and the cutter repairs damaged threads.
  • QUALITY CUTTER - blades are made of High Speed Steel induction hardened to 62 Rockwell (INT) and 58 Rockwell (EXT) for longevity of life.
Check Stock

ABN 131-Piece Metric Thread Repair Set – Damaged Helicoil-Type Thread Master Repair Kit for Automotive Repairs

  • [Create Stronger Internal Threads]: The ABN Helicoil Rethreading Tool Kit Metric Stripped Thread Repair Kit is a course threads M5 to M12 restorer 131-piece set made of chrome-vanadium with stainless steel coils to restore damaged threads in steel, cast iron, and aluminum spark plug engine repairs, stripped oil pan drain plugs, and more.
  • [Contents]: Thread restorer kit metric set includes 5 insert installation tools, 5 lug break pin tools, 5 twist drill bits, 1 hex key, 5 thread taps, 110 wire thread inserts, carrying case, and instructions.
  • [Perfect Sizes]: Twist drill bit sizes 5.2mm, 6.3mm, 8.3mm, 10.5mm, 12.5mm.
  • Screw tap and thread insert sizes M5x0.8x6.7mm, M6x1.0x8.0mm, M8x1.25x10.8mm, M10x1.5x13.5mm, M12x1.75x16.3mm (where M12 means thread outer diameter = 12mm, 1.75 means pitch of thread = 1.75mm).
  • [Quick Organization]: Steel carrying case with latch and molded plastic inside tray insert to keep universal thread repair tool pieces separated and easy to access.
  • Includes bottom recesses for organizing the coils in included plastic bags.
  • [Easy to Use]: Remove your damaged thread by using an included twist drill bit.
  • Load the thread insert into installation tool.
Check Stock

ABN Spark Plug Thread Repair Kit, 14mm Reamer Cylinder Thread Repair Tool & Thread Insert – Spark Plug Rethreader Kit

  • REPAIR PLUGS: The ABN Thread Repair Tool Kit is a time-saving kit that allows you to cut threads to fix a stripped and damaged 14mm spark plug threaded hole port and repair plug configurations in aluminum heads.
  • Socket includes metal retainers to keep plug held inside during install and removal.
  • VARIOUS APPLICATIONS: Chrome-vanadium steel (CR-V) M14 x 1.25 internal thread size on repair sleeve suitable for damaged spark plug threads to clean and rethread spark plug ports on a BMW vehicle and some Nissan and Toyota engines.
  • As long as the head is aluminum and the spark plug hole is straight with room to turn the tap using either a ratchet or wrench, this kit will allow you to repair plugs without removing the head.
  • EASY TO USE: Rotate the crankshaft to make sure no ports/valves are open, use the tap to install new threads, choose the proper depth of insert, and screw it firmly into the newly tapped head.
  • Apply grease on the tap to help catch any metal shavings (rather than letting them drop into the cylinder) and back out the tap out every half turn to every whole turn to clean the metal shavings from the tap.
  • PERFECT SIZE: 14mm reamer with 12 points.
Check Stock

Rotary Thread File RTK1, Chase, Restore, Repair, and Clean: Male, Female, Inch, Metric, And Pipe Threads. (3 Piece File Starter Kit)

  • Restore dent, dinged, or damaged threads in nuts and bolts within a minute with the RT1 Rotary Thread File! Restoring threads on the smallest bolts and getting into deep nuts without worrying about getting the right pitch is exactly what you’ll get with the Rotary Thread Starter Kit..
  • Unlike traditional thread repair tools that come in standard sizes, the RT1 and RT2 that comes in this kit is an all-in-one tool that eliminates the need for switching when you’re working with both external and internal threads..
  • The ingenious universal design of our thread file is what makes it stand out from other thread files. All inch, metric and pipe threads have the same 60 degree "V" angle. This allows this tool to quickly work on any project, both internal and external threads..
  • Ideal for restoring Inch, Metric, Pipe, Male, and Female Threads made out of Metals, Hardened Metals, Ceramics, Glass, and Plastics, the RTK1 Starter Kit has become the go-to thread repair tool for both home improvement enthusiasts as well as industry professionals..
  • Our US Patended and Engineered Rotary thread file is great for home projects, industrial, automotive, farm & ranch, and technicians. Purchase with peace of mind with our 24/7 friendly customer service..
Check Stock

Hi-Spec 39 Piece Metric Tap & Die Set. Complete M3 to M12 Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. Metric Tap and Dies: 8 thread sizes from M3 to M12 with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

86 Piece Metric and SAE Standard Tap and Die Bearing Steel Tools Set, Titanium Coated with Metal Carrying Case Amazing Tour

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

MCMASKE #2-56#4-40#6-32#8-32#10-24 1/4 -20 5/16 -18 UNC 304 Stainless Steel Socket Head Cap Screws Assortment Kit

  • They are coarse thread.Screws Thread Diameter: #2,Thread Pitch: 56 Per Inch.
  • #6,Thread Pitch: 32 Per Inch.#8,Thread Pitch: 32 Per InchThread.
  • 304 stainless steel have good chemical resistance and may be mildly magnetic.
  • The assortments contain the following sizes:#2-56x3/16"(20PCS).
  • The #2-56 to 5/16"-18 UNC 304 Stainless Steel Socket Head Cap Screws Kit are includes most common SAE standard sizes so you can easily replace a lost screw.
  • Packed in a plastic box,Easy to install and durable to use.
Check Stock

Hi-Spec 39 Piece SAE & Metric Tap & Die Set. Complete M3 to M12 \\/ #4 to 1\\/2in Fine & Coarse Tools to Cut, Chase and Thread with Screw Pitch Gauge in a Tray Case

  • CLEAN CUT RESULTS: Start DIY garage and workshop tapping and threading with the Hi-Spec 39 Piece SAE & Metric Tap and Die Tool Set. Whether its internal or external rethreading, cut new material, chase damaged or old screws, repair rusty nuts, bolts and spark plugs.
  • 34 PIECE SAE & METRIC SIZES: Most popularly used coarse and fine thread sizes and pitches of three and four flute tapered and plugged taps and dies. SAE & Metric Tap and Dies: 16 thread sizes from M3 to M12 and #4 to 1/2in with 16 pitch sizes plus NPT (1/8-27).
  • GOES THROUGH METALS: For materials such as carbon alloy steels, cast iron, aluminium, brass and bronze. Using premium GCr15 Alloy steel, a high carbon chromium bearing steel with high Rockwell hardness, contact fatigue performance, and corrosion resistance.
  • 3 TAP & DIE WRENCH HANDLES: Just fix the tap or dies tools into the steel alloy wrench handles with adjustable fittings and get turning. Includes a handy mini-screwdriver to assemble and fix the dies.
  • SCREW PITCH GAUGE: Easily and accurately measure the pitch or lead of a screw thread with the 16-Blade Screw Pitch Gauge. All tools and accessories are kept tidy and organised in a slimline case for simple storage and carry.
Check Stock

CALIDAKA Spark Plug Repair Kit 16Pcs Carbon Steel Spark Plug Tap Thread Repair Tools M14 X 1.25 Rethreading Set with Portable Case

  • 16Pcs Spark Plug Thread Repair Tool Kit: This is a professional universal thread repair kit is suitable for repairing for spark plug threads 14mmx1.25mm, it has multiple different sizes of taps.
  • it is a comprehensive kit that can make your repairing work much easier and more effective and convenient.Our spark plug thread kit is suitable for all kinds of products that require high thread strength..
  • Practical Spark Plug Tap Thread Repair Tools: This is a pretty practical effective spark plug thread repair tool set, it is designed to help fast and effectively repair damaged spark plug threads and lengthen spark plugs service time, universal size suits for repairing spark plug threads 14mm * 1.25mm..
  • Quality Material: This spark plug thread repair tool set are made of high quality steel material, that has high hardness and strength, strong force bearing capacity that is hard to deform or break, durable and reliable to serve a long life..
  • Convenient to Use: It is pretty simple and flexible to use this spark plug thread repair tool, there are 3 sizes of taps, suitable for ordinary size glow plugs that allows you to deal with multiple different types of thread problems.The spark plug repair tools can be used to quickly and efficiently repair damaged spark plug....
Check Stock

40 Piece Tap and Die Set,SAE Inch Sizes, Essential Threading Tool with Complete Accessories and Storage Case, for Cutting External and Internal Threads, SAE Thread Types: NC, NF, NPT, by NAKAO

  • ➤ [Fit for]:SAE Tap and Die Set Perfect to create new threads or repair damaged threads on most metals like carbon steel, cast iron, aluminum, brass, copper and stainless steel, Metric Tap and Die Set, Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman..
  • ➤[ Performance]: 40 Piece Tap and Die Set, All cutting teeth are precisely CNC machined and accurately heat treated to Rockwell hardness 60 HRC for best threading performance,Tapered coarse and fine taps and dies start threading more easily and smoothly, and prevent overthreading.Tap and die set,is designed to thread cutting: tap is used to process internal thread,while the die is for external thread..
  • ➤[Materia]: 40-Piece SAE tap and die set, Use Industrial grade GCr15 bearing steel construction, ensures durability and tool longevity, Can complete any work with confidence.SAE tap and die set Other Names: 40-Piece SAE tap and die set, SAE tap and die set 40 piece, 7559 Tap and Die Set, Essential Threading Tool, tap and die set SAE and standard, best choice 40 piece tap and die set, tap and die set SAE and standard craftsman.
  • ➤[Package include]: 17xTaps for Internal Threads.
Check Stock

HVAZI Metric M2 M2.5 M3 M4 M5 Nylon Phillips Pan Head Screws Nut Washer Assortment Kit (Black)

  • High Quality 510PCS Metric M2 M2.5 M3 M4 M5 Black PA66 Nylon Phillips Pan Head Screws Hex Nut Flat Washer Assortment Kit.
  • Thread Diameter: M2/(2mm) with Thread pitch: 0.4mm.
  • Screw thread: M2.5/(2.5mm) with Thread pitch: 0.45mm.
  • Screw thread: M3/(3mm) with Thread pitch: 0.5mm.
  • Thread Diameter:M4/(4mm)with Thread pitch: 0.7mm.
  • Thread Diameter:M5/(5mm)with Thread pitch: 0.8mm.
  • The assortment contains:M2x5mm(20PCS),M2x8mm(20PCS),M2 Hex Nut (40PCS),M2 Flat Washer(40PCS).
  • M2.5x6mm(20PCS),M2.5x10mm(20PCS),M2.5 Hex Nut (40PCS),M2.5 Flat Washer(40PCS).
  • M3x6mm(20PCS),M3x10mm(20PCS),M3 Hex Nut (40PCS),M3 Flat Washer(40PCS).
  • M4x8mm(15PCS),M4x10mm(15PCS),M4 Hex Nut (30PCS),M4 Flat Washer(30PCS).
  • M5x10mm(10PCS),M5x20mm(10PCS),M5 Hex Nut (20PCS),M5 Flat Washer(20PCS).
  • All products are made of durable nylon, Strong,anticorrosive.
  • Type specification complete, the quality is reliable,Easy to install and durable to use.
Check Stock

HVAZI 300pcs Metric M2 M2.5 M3 Stainless Steel Hex Socket Head Cap Screws Assortment Kit

  • High Quality 300pcs Metric M2 M2.5 M3 Hex Socket Head Cap Screws Assortment Kit.
  • Screw thread: M2/(2mm) with thread pitch: 0.4mm.
  • Screw thread: M2.5/(2.5mm) with thread pitch: 0.45mm.
  • Screw thread: M3/(3mm) with thread pitch: 0.5mm.
  • M2 different length:6MM,8MM,10MM,16MM,20MM.
  • M2.5 different length:6MM,8MM,10MM,16MM,20MM.
  • Made of 304 stainless steel for corrosion resistance..
  • 100% new,durable to use. Good Quality,Easy to install..
Check Stock

JoyTube 35 Pcs Thread Repair Kit, Stainless M6 x 1mm Thread Repair Insert Kit Compatible Hand Tool Set for Auto Repairing

  • 【Drilling】Clear the damaged threads with a standard drill. Please pay attention that for fluteless taps bigger holes are required..
  • 【Checking】Check that the thread and pitch of the tap and the bolt match..
  • 【Tapping】Use the special taps for cutting the holding thread into the cleared hole (recommended to use a suitable cutting oil)..
  • 【Install】Place insert on installation tool and position the adjustable ring so that the insert tang is centered in the tang slot. Wind the insert in with a light downward pressure until a half turn below the surface. Never work against the thread direction as the tang could break..
  • 【Ideal Tool】M6 x 1mm Thread Repair Insert Kit is ideal for restoring damaged threads, stripped internal threads and creates a stronger internal thread in soft metals..
Check Stock