Top File Bending Creasing Machine Reviews

Bonbo 5PCS Blacksmith Anvil Hardy Tool Set 1 Inch Hot Cut Tool, Creasing Stake Tool, Bottom Fuller, Turning Bending Scrolling Fork, Bending Forge Scrolling Welding Jig

  • Hot Cut Tool: Used in the anvil or clamped in a vise to cut hot metal. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick. Cut most of the way through, then break the piece off to prevent flying hot metal..
  • Creasing Tool Stake: Fits in a 1 inch Hardy hole in an anvil, or can be used in a Vice. Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • Bottom Fuller Tool: Used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with. Square shanks fit the square hole in the anvil and prevent rotation..
  • Turning Bending Scrolling Fork: Used to bend fork in an anvil or in a vice. Used to bend heated steel, quickly forming the curved shape you want. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
Check Stock

Avery Hanging File Tabs, 1/5 Cut, Clear, Permanent, Pack of 20 (6727)

  • Organize files quickly and easily with durable, pre-cut one-piece plastic tabs that fit standard hanging file folders.
  • Effortlessly identify files from any angle.
  • sturdy clear construction allows file folder labels to be viewable from front and back.
  • the strong plastic material resists tearing or bending to protect your folder labels.
  • Create handwritten file labels with ease.
  • classic white file folder labels provide easy and quick file identification.
  • Reuse hanging file folders again and again.
  • each insert sheet contains 20 labels that are easy to insert or remove when needed.
Check Stock

1 Inch Blacksmith Anvil Forge Hardy Tool Set, Including Hot Cut Tool, Creasing Tool Stake, Bottom Fuller, Turning Bending Scrolling Fork

  • 【Creasing Tool Stake】Coated with blacksmith's hot wax for ultra protection and durability, fits 1 inch Hardy hole of an anvil or can be used in a vice. Perfect for while blacksmiths doing repetitive work keeping consistent, like knife making, leaf, armor, etc..
  • 【Hot Cut Tool】Designed a sharp and hard edge along the top, used in the anvil or clamped in a vise to cut hot metal. Place orange/red hot metal or iron bars over the edge and strike with hammer, it can cut most of the way through and prevent flying hot metal, avoiding damage to the face of a hammer or anvil..
  • 【Turning Bending Scrolling Fork】Used to bend fork in an anvil or in a vice. Perfect for making "S" hooks, bending medium stock and most scroll work. This tool allows you to get leverage for manually bending metal pretty quick and effective with a hammer or bending wrench..
  • 【Bottom Fuller】Used in anvil or clamped in a vise to shape metal. Use a hammer to work from the top while the hardy tool works from the bottom. This provides you different anvil surfaces and edges to work with. Designed square shank fits the square hole in the anvil and prevent rotation..
  • 【Professional-Grade Steel Hardy Tools Set】Forged of quality & heavy-duty steel, can withstand very high temperature, ....
Check Stock

4PCS Blacksmith Anvil Hardy Tool Set 1 inch - Creasing Stake Tool, Hot Cut Tool, Bottom Fuller &Turning Bending Scrolling Fork

  • 【APPLICATION】-- This Blacksmith Anvil Forge Hardy Tool Set fits in a 1 inch Hardy hole in a anvil or can be used in a vise.Square shanks fit the square hole in the anvil and prevent rotation..
  • 【Turning Bending Scrolling Fork】This is a really handy tool for making S hooks or other basic turning/scrolling shapes. This tool allows you to get leverage for bending metal by hand, with a hammer, or with a bending wrench..
  • 【Bottom Fuller Tool】Bottom fuller hardy tools are used in the anvil or clamped in a vise to form metal. Use a hammer to work from the top, while the hardy tool works from the bottom. This gives you different anvil surfaces and edges to work with..
  • 【Creasing Stake Tool】Two piece of bar stock weld it together on a stand. This is used for doing creases in metal. You can put the metal on the tool and use a chisel to drop the metal down into the slot..
  • 【Hot Cut Tool】This plate stands straight up with a Hand Forged, hardened and Sharpened edge along the top. To place orange/red hot steel over edge and strike with hammer. Cuts through hot steel pretty quick..
Check Stock

Disney Princess University College Text Logo Premium T-Shirt

  • ... Made from strong 100% stainless steel that is 1 mm thick to easily fit into your shoe but durable enough to not bend or break. Easily store your shoe horn by using the hanging eye hole. Finished with our Alpine Swiss logo..
  • SAVE YOUR SHOES – Shoe horns keep your shoes looking new longer by preventing bending and creasing on your shoe heel collar as a result of forcefully pulling them on. Save your fingers from the hard work by using a shoe horn that will keep your shoes in great condition and extend their lifespan..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

Transon Poster Documents Storage Tube Extendable for Artworks, Blueprints, Drafting and Scrolls Color Black

  • ã€Adjustable Shoulder Strap】The adjustable shoulder strap makes it easy for anyone to carry..
  • ã€Material】This poster tube is made of PE plastic to protect contents from bending or creasing in transit..
  • ã€Widely used】Great for artists, illustrators, drafters, architects, etc. Perfect for storing paper, tracing paper, maps, canvas and posters..
  • ã€Waterproof and Lightproof】Cover twists and locks in place, making the tube almost completely water and light resistant..
  • ã€Portable Telescopig Document Tube】Telescoping storage tube could extend from 17.7inch to 28.4 inch in length, and the diameter is 2.76inch, almost handle various poster dimensions..
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

Avery Printable Hanging File Folder Tabs, 1/5 Cut, White, 90 Total (5567)

  • Create a clean, professional look for your filing system with printable filing tabs for hanging files.
  • No plastic holders required, these hanging folder tabs resist tearing and bending.
  • Strong yet flexible, the bright white material is designed for the best printer performance.
  • One-piece hanging file tab design lets you easily print double-sided tabs.
  • Easily design and print custom file tabs for hanging folders with free templates and software from the Avery site.
Check Stock

Spoon Ring Bender, Ring Bending Tool, Spoon Ring Making Machine Tool Kit for Jewelry Spoon Rings Press DIY

  • QUALITY - Our ring bending tool is made of quality steel, and the white ones in this ring making kit are nylon dies, used for softer materials that might scratch or dent..
  • DESIGN - The ring maker machine includes 9 sizes of bending posts of metal, and reusable negative bend pieces of metal and nylon for each post size. This is a multi-functional ring making tool, it works simple and easy to change the dies..
  • DURABLE - Our ring bending machine is sturdy and durable, works for bending silverware and making rings and jewelry, the thickness of the flatware will be the only limiting factor..
  • SIMPLE - It's simple to set the spoon ring maker machine up, and it's fun and easy to make spoon rings with our ring bender machine, for both beginners and practitioners..
  • SERVICE - If you have any questions about our ring bending kit, please feel free to contact us for solutions..
Check Stock

Sony CEA-G80T 80GB CFexpress Type A Memory Card

  • Write speeds up to 700MB/s and read speeds up to 800MB/s.
  • New heat sink design maximizes heat disspiation, allowing long recording times even at 4K/120p.
  • Up to 5X more drop impact resistance, and up to 10X more resistant to bending.
  • IPX7 water ingress protection rating and an IP5X dust ingress protection rating (IP57) for enhanced durability.
  • Supported by File Scan Utility memory diagnostic software and Memory Card File Rescue data recovery software.
Check Stock