Top Filament Holder Reviews

Zeberoxyz 3D Printer Filament Holder with Adjustable 26-126mm Filament Mount Rack Bracket Fits for TPU/PLA/ABS/Nylon 0.5-3KG 3D Printing Material(Holder for 0.5-3kg Filament)

The width can be adjusted (about 26mm-126mm/1.02inch-4.96inch) to adapt to different filament reels.
The range of the material rack can be adjusted according to the size of its filament, which is more flexible.
Material: 3D Printer Filament Holder made of high quality Metal and Plastic, stable, durable, fine workmanship.
Stable and durable foot pads increase stability and prevent the bracket from moving during work.
The material draws and slides smoothly to avoid jamming and winding of the spool.
Widely Used for 0.5KG 1KG 3KG PLA ABS 1.75mm 3.0mm all 3d printer filament.
Package Content: 1Kit 3D Printer Filament Holder, 2PCS M4 T-nuts, 2PCS M4x6mm Screws, 1PCS Allen Key.
The Filament in the image are only used with the photo scene, the actual shipping products do not contain Filament, please note, thank you.

Check Stock

Zeberoxyz 3D Filament Rack Spool Holder Bracket Used for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer CR-10 (Spool)

3D Printer filament holder Material:High Quality Metal and Plastic, long service life, fine workmanship.
Filament Holder Install:Easy and quick installation, Use 2pcs M4 screws to fix, stable and not loose.
Suitable for 0.5kg or 1kg and below ABS/PLA 1.75mm 3.0mm 3D printer filament.
The 60° inclination angle design of the filament frame provides smoother feeding, Bracket reinforcement design, good strength and durability.
Application Scope: Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series.

Check Stock

BIQU Equipment 1 Spool Filament Mount Rack Bracket for PLA/ABS Filament 3D Printer

Made of high quality acrylic, stable, durable.
The holder tube is made of 3d pla filament.
Peel off the sticker before you assemble it.
Suit for 1Kg PLA ABS 1.75mm 3.0mm 3d printer filament.
1PC 3D Filament Mount Rack（Not including the filament).

Check Stock

3DZWMAN 3D Printer Filament Holder Used for TPU/PLA/ABS/Nylon/Wood 0.2kg 0.5KG 1KG 3kg 3D Printing Material

What's contained: you will get 1 set black 3D printer spool holders, include 2 pieces separated holders, compatible with PLA/ABS/TPU/Other 3D printing....
Smooth bearings design: filament spool holder adopt the latest technology, the silicone anti-slip mats has better adhesion than before and the holders....
Easy to use: the filament roller is a pre-assembled holder, no tools needed, easy installation and quick installation, the bearings may be a bit stiff....
Strong and quality: the 3D printing spool holder made of quality metal and plastic, stable and reliable, the size is approx. 168 x 24 x 35 mm/ 6.61 x....
Wide applicable: adopting quality material which creates a consistent flowing spool that reduces all drag on your 3D printer filament, the separated....

Check Stock

Creality Rotatable Filament Spool Holder Upgrade Kit Built-in Bearing 3D Printer Bracket for Ender 3 V2 Ender 3 Pro CR10 Ender 5 Pro Series 3D Printers

【Application】: The filament spool holder is compatible with Ender 3 V2,Ender 3 Pro,Ender 3,CR10 ,Ender 5 Pro and more 3D printers..
【Rotatable Bearing】: Independent rotating shaft design for low rotation resistance, good rolling stability,less barrel wear and stable filament feeding..
【Durable Material】: This 3D printer spool holder is made of high strength ABS and PC material, which is durable and exquisite..
【Easy Installation】: The filament holder only needs to be fixed with screws, which perfectly matches with 3D base profile..
【Multiple Installation Ways】: The Rotate Spool bracket can be installed on the top profile or base profile of the 3D printer..

Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....

Check Stock

Black Bearing Design 3D Printer Filament Spool Holder Fits All Spools of Any Size and All Filament Types for Pla/abs/TPU/Other 3D Printing Materials 2 Set

What's contained: you will get 2 set black 3D printer spool holders, 4 pieces separated holders, compatible with PLA/ABS/TPU/Other 3D printing....
Smooth bearings design: filament spool holder adopt the latest technology, the silicone anti-slip mats has better adhesion than before and the holders....
Easy to use: the filament roller is a pre-assembled holder, no tools needed, easy installation and quick installation, the bearings may be a bit stiff....
Strong and durable: the 3D printing spool holder made of quality metal and plastic, stable and durable, the size is approx. 168 x 24 x 35 mm/ 6.61 x....
Wide applicable: adopting quality material which creates a consistent free flowing spool that reduces all drag on your 3D printer filament, the....

Check Stock

GOESWELL Enchanted Willow Vine, Christmas Decorations Flexible DIY Vines with Lights, 144 LEDs Vines for Room Decor, 7.5FTt Willow Vine Lights for Wall Bedroom Living Room Home Decor (No Remote)

【PIUGGABLE FILAMENT】The filament is not fixed to the lamp holder and can be replaced by pulling out the filament when it’s damaged. Set dimmer/timing by remote. The lights will go out after six hours of work and start working again after 18 hours,you can set this loop timing in your usual used time period..
【VINTAGE LAMP HOLDER】Champagne gold lamp holder and soft lighting radiate a luxurious and romantic atmosphere. This indoor string light is suitable for romantic weddings, cozy family gatherings and parties, birthday parties, and various holiday parties..
【SAFETY & DURABLE】The bulb is made of drop-resistant plastic and is more durable than a traditional glass bulb. You can even touch the string light while it is working because it is a low-temperature lighting string. The string light’s energy consumption is less than or equal to a 6W incandescent lamp. More energy efficient..
【EASY INSTALLATION】All the LED bulbs have been assembled and are ready to start decorating the area directly. You can hang the lights where you want to decorate. Don't worry about the length, this is interconnect st....

Check Stock

3Dman Filament Spool Holder Bracket for Material TPU/PLA/ABS/Nylon/Wood 0.5KG 1KG for 3D Printer

【Material】The 3D printer filament holder is made of high quality metal and plastic, sturdy and durable, long service life. Fine workmanship, small size, easy to carry and store..
【Easy Installation】1 x 3D printer filament holder, 2 x M4 T-nuts, 2 x M4x6mm screws. Filament installation is easy and fast, using 2 M4 screws to fix, stable and not loose..
【Convenient and durable】60° tilt angle for smoother feeding. Stand reinforced design, hard strength, durable..
【Widely used】Suitable for 0.5kg or 1kg and below TPU/PLA/ABS/Nylon/Wood 1.75mm 3.0mm 3D printer consumables..
【Application Scope】 Suit for 2020, 2040 aluminum frame type 3D printer, Ender 3 series, CR-10 series..

Check Stock

Octave Blue ABS Filament for 3D Printers - 1.75mm - 1kg Spool

STRONG AND DURABLE 3D PRINTS - ABS is one of the plastic filament materials most commonly used for 3D printing. It produces durable 3D printed models that have higher resistance to heat and are less brittle than those printed with some other popular 3D printing materials (like PLA).
HIGH QUALITY ABS FILAMENT - Octave engineered its ABS filament to work at a wide extruder temperature range, and manufactures it to tight tolerances using quality materials, so it works smoothly and consistently.
PROFESSIONAL 3D PRINTED MODELS - Models printed with Octave ABS filament are tougher, more durable, and more heat resistant than models 3D printed with PLA, and have more in common with mass-produced plastic models and parts. Octave ABS can be sanded, glued, and painted, as well as post processed in an acetone vapor bath for a smoother, glossy finish..
WIDE COMPATIBILITY - Octave ABS filament prints at temperatures from 210-250℃, so it works well with most 3D printers that support 1.75mm ABS filament, like Raise3D, ZMorph, Afinia, FlashForge, Creality, Fusion3 F410, UP, PrintrBot, MakerGear, Solidoodle, CraftBot, and others (80-120℃ heated print bed strongly recommended, external spool holder may be required—always check your printers’ specifications)..

Check Stock

Upgraded 3D Printer Filament Dryer Box, SUNLU Filament Dehydrator Dry Box, Keep Filament Dry During 3D Printing, Spool Holder,Compatible with 1.75mm, 2.85mm, 3.00mm Filament,Storage Box

①【Keep dry, good printing effect】Dust-free, moisture-free. 3D printer filaments are hygroscopic, moisture can cause printing failure, SUNLU filament dryer box help to dry excess moisture, keep the filament dry, no more brittle PLA, PETG, ABS filament..
②【Fully assembled and easy to use】SUNLU dry box is simple to operate, turn on by hit either button, hold the left button to change the dry time, press the right button to change the temperature setting. SUNLU dryer box can be used as a spool holder. The bearings that hold the filaments are very stable and allow the filament to roll steadily..
③【Simple but Effective】The print quality will be better if using filament dried by SUNLU filament dehydrator box, surface smoother, layer adhesion increased. It can be more helpful if you live in a humid temperature zone.SUNLU filament dryer box is easy to open and the lid is transparent allowing direct inspection of the length of filament remaining in the box..
④【High Compatibility】The adjustable temperature(time) range is 35-55℃(0-24hours), SUNLU dryer box can bake most types of 1KG filament at a designated temperature for hours. Maximum capacity of the drying oven: 210*85 mm, can accommodate filament diameter: 1.75mm/2.85mm/3mm..

Check Stock

3D Filament Dryer Box Filament Dry Dehydrator 3D Printer Filament Storage Box Keeping Filament Dry During 3D Printing JAYO Dry Box

【Large Capacity and 99% Fitness】JAYO Dryer Box Can Fit The Max Size Coil Is Φ210*85(H)mm, It Works Perfectly with All Standard Filament Diameters....
【Adjustable Temperature Range 35℃~55℃】Suit for All Brand 3D Filament on The Market, You Can Choose Different Temperature of the Drying Box....
【Dry All Your 3D Filament】No Trouble with Poor 3D Printing by Wet Filament, Dryer Box(Filament Holder) can Drying while Printing to Improve 3D....
【Easy to Adjustable Temperature】Only 2 Buttons to Operate The Drying Time and Temperature, Original Setting is 6 Hours and 50℃, You Can Also....
【Warm Tips for Drying and Printing】Baked 3-5 hours Before Printing, It Will Have Better Printing Effect When Used with Printer. You can Try....

Check Stock

Iverntech 1 Spool Sheet Metal 3D Printer Filament Holder for PLA ABS Wood TPU Nylon Flexible Materials

Material: black sheet metal, anti-oxidation.
The pulley has grooves, it holders filament and avoids friction with the inner wall.
Packing with 1 set filament holder (2 pcs). Filament pictured is for display purpose only, not included.

Check Stock