Top Filament Brands Reviews

SUNLU Filament Dryer, FilaDryer S1 Filament Dry Box, Compatible with 99% of 1KG PLA PETG ABS TPU 3D Printer Filaments, Dehydrator Storage Box, Filament Spool Holder, Black

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock

3D Pen Filament 320 Feet, 16 Colors，Each Color 20 Feet, Bonus 250 Stencils eBooks - 3D Printing Pen PLA Filament 1.75mm, High-Precision Diameter and Kids Safe Refill

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock

Open Smart Tag for XYZPrinting 3D Printers Compatible with 3rd Party Filament Open Source 3D Printing Filaments with Different Materials PLA PETG ABS Carbon

Print Third Party Filament: Open up your printer to materials from different brands.
Quick Installation: Install on spool, register with printer and ready to go.
Spool Size Versatility: From 600g to unlimited / Compatible with any size spool of filament.
Compatible with da Vinci nanoSeries, miniSeries, Jr. Series, and Color Series printers..

Check Stock

SUNLU 250g PLA Filament 1.75mm Bundle, 3D Printer Filament, Dimensional Accuracy +/- 0.02 mm, 0.25 kg Spool, 8 Rolls,Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure Yellow

【Say Goodbye to Poor 3D Printing by Wet Filament】Wet 3d printing filament will caused to stringing, clogging, poor adhesion, and Layer Shift. SUNLU FDM 3D Filament Dryer Enclosure can drying while printing to improve your 3D model, reducing the impact of the objective environment on the printing of 3d filaments..
【Personalized Temperature Setting】The user can adjust the temperature of the drying box according to different 3d filament type, ambient temperature, humidity and other factors. Adjustable temperature range 35℃~55℃. Suitable for more than 20 kinds of 3d printing filament commonly used in the market.
【Personalized Drying Time Setting】 The default continuous drying time of the drying box is 6 hours, and you can also manually set the drying time. The time setting range is 0~24 hours. Commonly used 3D filament on the market under normal circumstances only need 3-6 hours of drying to achieve a good printing experience and printing effect..
【Compatible with 99% of 3D Filament Spools】A: Maximum capacity of SUNLU dry box is Φ210*85(H)mm. B: Compatible with all the mainstream 3D filament brands SUNLU, GEEETECH, ERYONE, ESUN, AMAZON BASIC etc..
C: Works perfectly with all standard filament diameters 1.75mm/2.85mm/3.00mm..

Check Stock

ERYONE Rainbow PLA Filament 1.75mm Filament for 3D Printer 1kg /Spool, Steampunk Rainbow

[Rainbow Steampunk Filament Makes Vibrant Metallic prints]Rainbow steampunk finish PLA filament begins with a corroded brass (green) base color transforming through to copper and gold .No hardened nozzle is needed to print with this filament. Perfect for rustic and metal looking props or prints ..
[Large Size Model ,Marvelous Metallic Steampunk]As per color change it’s about 13-15m, bigger size prints will show up more of the amazing colour changes. Small prints may only stay one color due to the nature of the filament..
[No clogging, Non Toxic | Professional Packaging, Vacuumed Sealed]+/-0.05mm tolerance . Low warping to ensure consistent feeding and stable prints, no clogging, extremely high success rate. 100% with virgin natural materials, biodegradable and Eco-friendly, no Harm to user and environment. Ideal for indoor printing. Professional package by a Sealed Vacuum bag with a desiccant bag to keep it dry and free off dust and foreign particles.
[High Compatibility]- Compatible with 3D Printers that use 1.75MM filament, such as: Prusa, Makerbot, etc. Our filaments have been tested on various brands of 3D printer in the market and with positive customers' feedback..
[100% Money Back Guarantee] Eryone guarantees your purchase and provides a lifeti....

Check Stock

SUNLU Upgraded Dry Box for 3D Filament Storages, Dehydrator of Filament Dryer Box, 3D Filament Enclosure Compatible with 1.75mm, 2.85mm, 3.00mm 3D Filament, Spool Holder (White)

【Say goodbye to the printing failure】3D printing filaments are hygroscopic, moisture can cause printing failure. SUNLU filament dryer box helps to dry excess moisture, improve your 3D model, and make the filaments say goodbye to the troubles of drawing, clogging, and poor adhesion..
【No assembly required, easy to operate and effective】SUNLU 3D printer Filament enclosure requires no assembly and can be used right out of the box. There are only two buttons, and the operation is convenient and simple. SUNLU filament dehydrator box makes the printing effect better and the surface of the model is smoother. No more brittle PLA+, PETG, ABS filament..
【Personalized settings, strong compatibility】The default drying time of SUNLU dryer box is 6 hours, you can also set the drying time and temperature according to your own preferences. The time setting range is 0~24 hours, and the temperature range is 35°C~55°C. The drying box is compatible with filaments of different brands such as: SUNLU, ERYONE, ESUN, GEEETECH, etc. It is also perfectly suitable for all standard filament diameters: 1.75mm/2.85mm/3.00mm..
【Ultra-quiet design, free your hands】SUNLU filament Enclosure box is very quiet at work, less than 10db when running, no disturbing of your li....

Check Stock

Anycubic Kobra Max 3D Printer Smart Auto Leveling with Self-Developed ANYCUBIC LeviQ Leveling and Filament Run-Out Detection Large Build Size 17.7 x 15.7 x 15.7

Large Build Size: ANYCUBIC KOBRA MAX 3D Printer comes with a large build volume of 17.7 x 15.7 x 15.7 in. / 45 x 40 x 40 cm, which is enough for daily....
Self-developed Anycubic LeviQ Leveling Function: Anycubic upgrade auto leveling function with a 25-point smart and precise calibration. It can....
Stronger Construction & Higher Precision: ANYCUBIC KOBRA MAX 3D Printer is equipped with double thread Z-axis moving construction. It can minimize the....
Filament Runout Detection: Equipped with a filament runout sensor, it can monitor the supply of filament intelligently. If your printer runs out of....
100% Satisfaction Service: ANYCUBIC is one of the best 3d printer brands, which provide the best 3d printers for every customer. We also provide the....

Check Stock

Fused Materials PVA 3D Printer Filament, 1.75mm, 0.5kg roll

An Innovative Material - Fused Materials PVA is a water soluble filament used with dual extruder 3D printers to print support structures.
Consistent Diameter - +/- .03mm dimensional accuracy.
Optimized for PLA - PVA works with a variety of materials but it works best with PLA.
Low-print temperature - PVA work best at low-temperatures. Refer to the instructions on the box!.
Works on all major dual extruder 3D printer brands.

Check Stock

SUNLU Filament Dryer, 3D Printer Filament Storage Box, 360° Surround Heating, Touch Screen, Humidity Detection, Dryer Box for Nylon PA ABS PETG PLA Filament 1.75/2.85/3.00mm, FilaDryer S2, Black

①【Importance of Filament Dryer】Any material of filaments will absorb moisture from the air, filament being old or in high humidity place may absorb a lot. Damp filament will cause many printing issues, filament dryer can remove moisture from the damp filament..
②【Keep Filament Dry During Printing】The filament dryer can be used as a filament spool holder, so filaments can be dried during 3D printing, it can improves print quality. If the 3D printer is in basement or orther humid place, it's more important to keep filament dry..
③【Bring Damp Filament Back to Live】Filaments that have been stored for a long time may have absorbed a lot of moisture, filament dryer is specifically made for drying 3d printer filament, it can effectively remove excess moisture to save the old filament..
④【Fast Heating and Even Drying】SUNLU filament dryer can heat up to preset temperature quickly, the built-in spindle keeps the filament spinning continuously, heating evenly. Adjustable drying time range: 0-99 hours, adjustable drying temperature range: 35-70 ℃..
⑤【Very Simple but Very Effective】SUNLU filament dryer is very easy to use, FilaDryer S2 is equipped with a large touch screen, you can set different dry temperatures and dry times for diffe....

Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

【8 Rolls of 0.25kg 1.75mm PLA Filament, Multiple Color Choices】8 rolls of 250g SUNLU 1.75mm PLA filament.Color:Black+White+Grey+Burly Wood+Purple+Blue Grey+Grass Green+Pure+Yellow.The design of 250g PLA filament is convenient for customers with multiple color needs.Especially for multi-nozzle 3d printer users and 3d pen users..
【SUNLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/N....

Check Stock

3D PETG Filament 1.75mm Black 3D Printer Filament 1kg Spool PETG Filament Dimensional Accuracy +/- 0.02 mm PETG Black XVICO

【PETG Filament Printing Tips】 petg 3D filament has the advantages of high purity with low shrinkage and superb layer bonding, Filament 1.75mm meeting your demands for different printing projects. 1.75 petg Filament 100% made of environment-friendly natural materials, harmless to users and the environment.petg Filament Recommended Extrusion/Nozzle Temperature 230°C – 240°C, Bed 70°C – 80°C..
【petg filament 1.75mm Clog-free & Bubble-Free】3D Printer Filament approximately 2.2 LBS 1 KG Spools.petg filament Completely dried for 24 hours before packaging and vacuum sealed with desiccants in nylon re-bag, enable much smoother and more stable printing. Since the petg filament is prone to moisture, please store it into a re-sealable aluminum foil bag after unsealing to maintain excellent printing performance..
【PETG Filament Less-tangle & Wide Compatibility】3D Petg Filament Full mechanical winding and strict manual examination, which guarantee the Petg filaments tidy and easy to be fed.The 1.75mm filament You don’t have to worry that it will be incompatible with your 3D printer — 1.75 mm in diameter, dimensional accuracy +/- 0.02 mm. It works perfectly with most FDM 3d printers on the market..
【3D Petg Filament ACCURACY & CONSISTENCY】....

Check Stock

ERYONE Silk Dual Color Filament PLA 3D Printer 1.75mm, +/-0.03mm, Coextrusion Filament PLA Shiny Filament 1kg(2.2lbs), Red Green

1.【Silk Dichromatic Filament】ERYONE dual-color silk filament is made from two individual colors, extruded into one filament strand.You can change the visible color by rotating the color-blending filament to different orientations..
2.【High Accuracy Silk Filament】The diameter of the blended dual color silk filament is 1.75mm with a tolerance of +/-0.03mm. Dichromatic PLA filament feed smoothly and constantly without clogging the nozzle or extruder making you a smoothly printing & better surface..
3.【No Warping Multicolor Filament】Perfect winded silk blended color pla filament,tangle-free before unopened, no stringing and warping.Universal compatibility with most FDM 3D printers and 3D Pens..
4.【Strong Layer Adhesion】This silk PLA filament has perfect first layer adhesion to reduce warpage, shrinkage, curl and print failure.1.75mm Dual color silk 3D printer PLA Filament is no bubble,strong layer adhesion make the printing parts stronger..
5.【Silk Effect Filament】When printed with this 3D printing silk dual color filament, it creates a really unique look on your parts! Multicolor silk filaments can output with incredible pearlescent and gorgeous silk surface..

Check Stock

Inland 1.75mm PLA PRO (PLA+) 3D Printer Filament Refill, 1KG (2.2lbs) Spooless Filament, Dimensional Accuracy +/- 0.03mm, Blue Refill for Inland Reusable Spools

PLA+ FILAMENT REFILL SPECS: 1 KG (approximately 2.20 lbs) Per Refill 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm).
SPOOLLESS FILAMENT PRINT SETTINGS: Recommended Extrusion/Nozzle Temperature: 210°C - 225°C (410°F - 437°F) Recommended Bed Temperature: 60°C -80°C (140°F - 176°F).
INLAND REFILL FILAMENT: Designed with the highest quality and compatibility in mind, Inland PLA+ Filament undergoes numerous testing procedures to ensure you spend less time troubleshooting and more time printing! Your filament will arrive completely dry and vacuum sealed with desiccant to ensure a high-quality, smooth print. You can expect the same print quality as Inland PLA+ Filament, without the spool!.
USE LESS PLASTIC WITH PLA PLUS REFILL: PLA+ Filament is non-toxic and comes without a spool. PLA+ is less brittle than standard PLA, improving your prints' toughness and layer adherence. We also offer the Inland Reusable Spool that perfectly fits this refill! Use less plastic and use the same Spool with every new filament refill..
EASY-TO-USE: Inland Spooless PLA+ Filament melts evenly and feeds smoothly into your 3D Printer creating defined corners with minimal warping and no odor. Produce your best print with our no-clog, bubble-free filaments. Inland fi....

Check Stock