Top Figure 8 Flange Reviews

InSinkErator PROCCPLUS Pro Series 3/4 HP Food Waste Disposal with CoverStart and Evolution Series Technology

  • Extended sink flange, suitable for quartz farmhouse sink and kitchen sinks with stainless steel material..
  • Golden Extended Sink flange with deep basket strainer fits for 3-1/2 inch standard sink drain opening. The deep basket strainer can be easily catch....
  • Deep Garbage Disposal Sink Flange fits standard garbage disposal units, 4-1/2-Inch(114mm) rim diameter, 2-5/8-Inch(66mm) depth, deep sink flange..
  • Golden deep sink flange includes 3 extended bolts. Easy to install..
  • Coordinates with golden composite sinks and stainless steel sinks..
Check Stock

Korky 6000BP Universal Toilet WaxFree Seal with Hardware - Toilet Installation Made Easy - Made in USA , Red

  • Set-Rite kit extends toilet flange surface above finished floor.
  • Corrects improper flange height during repairs and remodels.
  • For existing PVC, ABS, cast iron or stainless steel ringed flange.
  • Creates optimum sealing with a standard wax ring.
  • Corrects flange height from 1/4 in. to 1-5/8 in..
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

BOB2888 - Stainless Steel 2-Roll Tissue Dispenser

  • Bar passes through flange and is heliarc welded.
  • Cover snaps over mounting flange to conceal screws.
Check Stock

Angle Grinder Spanner Wrench 12 pcs Angle Grinder Flange Nuts with 2 pcs Spanner Angle Grinder Flange Replacement for Makita Ryobi Dewalt Milwaukee Craftsman

  • ★Return your hand-held power grinder to its full operating capacity with this angle grinder flange nut for 5/8.
  • ★14pcs include: 6 x inner angle grinder flange nuts, 6 x outer angle grinder flange nuts and 2 spanners.
  • ★The Angle Grinder Spanner wrench is approx. 5.5”/ 140mm length, and for the flange nut, the outer diameter is 0.55”/14mm, the inner diameter is....
  • ★The grinder angle spanner wrench flange nut kit is made of carbon steel, durable and stable.
  • ★NOTE: All grinders are different, all brands have different size grinders, look over your grinder and find the info on the tool, find the size for....
Check Stock

ISPINNER 180pcs 6 Sizes Aluminum Blind Rivets, Pop Rivets Assortment Kit (Black)

  • HIGH QUALITY - Black Aluminum Grip and Steel Mandrel. This high corrosion resistance makes them the perfect choice for use in any environment..
  • STRONG HOLD - Large flange aluminum blind rivets can increase the connect area with the board to increase the force area. Thick shaft to ensure a secure hold and pop when tight..
  • DIMENSIONS - Grip Diameter: 3/16" | Grip Length: 1/2" | Grip Range: 6.0-8.0mm | Flange Diamter: 5/8".
  • PACKING - 50pcs 3/16"x1/2" pop rivets with aluminum large flange.
  • WIDE APPLICATION - Our rivets are very strong and are great for both indoor and outdoor use. They are great to have around for when you need them most. It does not deform surfaces after the riveting process is finished. Good resistance to temperature variations..
Check Stock

Toilet Flange Repair Kit - Works on 3" or 4" Cast Iron, PVC or ABS Toilet Flanges with Broken Bolt Rails

  • REPAIR BROKEN BOLT RAILS on a 3" or 4" Cast Iron, PVC or ABS solid toilet flanges. (will not work on PVC with metal outer ring).
  • SUPER STRONG ALUMINUM ALLOY that will not rust or corrode. Split ring design. Does not restrict flow of existing pipe. (Do NOT hit with hammer! Use rubber mallet if needed).
  • FOR PROPER INSTALLATION you must have 3/8" clearance between flange and flooring. Broken flange must be completely free of trash or debris around and under broken flange. (putty knife works best).
  • CAN BE INSTALLED IN MINUTES once existing flange is cleaned and prepped. (Search YouTube for our installation videos).
  • DESIGNED BY A PLUMBER for plumbers or DIY'ers so you don't have to replace the whole flange..
Check Stock

Pop Rivet With Large Flange Steel Mandrel/Aluminum Body 3/16 x3/8 Inch 4,8x10 mm Flange Diameter 5/8 15.5 mm Blind Rivet Grip Range 1/8-3/16 Inch 3-5 mm Qty 100 pcs

  • ⚙️ Rivet size: Hole size: 13/64" (4,9-5 mm), Diameter: 3/16" (4,8 mm), Lenght: 3/8" (10 mm), Flange diameter: 5/8" (15,5 mm), Grip range: 1/8" - 3/16" (3-5 mm).
  • ⚙️ A large flange aluminum blind rivet increases the contact with the board increasing the force area..
  • ⚙️ It does not deform surfaces after the riveting process is finished. good resistance to temperature variations. Fast simple and great quality assembly, requires simple and lightweight tools. The riveting process is environmentally friendly, free smoke, sparks, fumes..
  • ⚙️ Pop rivets with breaking steel mandrel, designed for fastening in a fast and simple way of all kinds of materials with different types of manufacturing: composites, laminate materials, heat-treated, etc..
  • ⚙️ Package: 100 pcs, 3/16"x3/8" (4,8x10 mm) pop rivets with aluminum large flange.
Check Stock

MTD 712-0417A Hex Flange Nut 5/8-18- 3 Pack

  • Known as Hex Flange Nuts, Flange Lock Nuts, Spindle Nuts, Blade Lock Nuts, this nuts are used to secure a blade to the spindle.
  • Work with MTD, Craftsman, Troy Bilt lawn mowers & tractors. Had been tested and confirmed to work with LT1040 LT1042 LT1046 LTX1040 mower deck spindles.
  • Replace the part# 712-0417, 712-0417A, 912-0417, 912-0417A, 753-05549, 112-0330.
Check Stock

On-Stage MA-100 3/8" Male to 5/8" Female Mic Screw Adapter

  • Our MA-100 3/8" Male to 5/8" Female Mic Screw Adapter quickly and easily allows European booms and accessories to fit standard stands..
  • This adapter features a knurled outer flange for ease of tightening and loosening. Chrome finish..
  • Converts mic stands from 5/8" male to 3/8" male threading.
  • Knurled outer flange increases grip for ease of tightening and loosening.
  • Enables use of standard mic stands with European mic accessories.
Check Stock

Holley 300-137 LS1/LS2/LS6 Single Plane Intake Manifold

  • Carb Mounting Flange Height from Lifter Valley Cover Flange: 4.95".
Check Stock

Fire Rated Access Door For Walls, Steel, 24x36

  • 24-1/8"W x 36-1/8"D x 2-9/16"H Return Flange Dimensions..
Check Stock

Acudor ED-2002 Flush Access Door 8

  • Material: 18 gauge steel door & frame, Finish: 5 stage iron phosphate preparation with prime coat of White alkyd baked-on enamel.
  • Lock / latch: 1 x Stainless Steel Screwdriver Operated Cam Latch.
  • Flange: 1 wide outside flange with 1 7/16 deep mounting.
Check Stock