Top Fibre Board Reviews

Encasa Homes Replacement Ironing Board Cover with Extra Thick Pad, Made in India, Standard (Fits Large Boards 15 x 54 inch) Elasticated, Scorch Resistant, Durable - Green Roses

  • SUPERIOR MATERIALS: Our 'Luxury Line' covers consist of a High Performance Cotton fabric, attached to an Extra Thick 5mm Fibre Pads to give exceptional durability and an unbeatable ironing experience. Fabrics are Scorch Resistant to high ironing temperatures, and thick fiber pad gives heat reflection at the same time allowing steam to pass through, thus making the ironing process quick and efficient.
  • PERFECT FIT: Choose the closest sized Ironing Board Cover for your board from 2 SIZES always available in stock. Tightening is done with a very strong elastic bungee cord, which wraps the cover around the board. The elastic can be further tightened if required with an attached clip. This allows a perfectly snug fit for your board with a creaseless ironing surface for effortless ironing..
  • FAST COLOURS: Vibrant colours used for dyeing and printing are tested for fastness to ensure they do not bleed onto your garment. This also allows the cover to be washable in cold water if it gets dirty..
  • OFFER: This offer Includes Ironing Board COVER with PAD Only. You can replace your worn out cover with this cover and immediately find a great difference in your ironing experience. We recommend you should change any covers that is older than 2 years..
Check Stock

AirPro Fibre Fixer Ironing Mat – Iron faster, safer and more Comfortable on your table - 31x58 Inch – 6 Layers! Extra Thick Padding & Durable - Premium European Quality – Resist Scorching & Staining

  • ✅ HIGH EUROPEAN QUALITY: This Ironing Board Pad is made from 100% BCI certified Cotton and produced conform the highest standard. Premium European Quality!.
  • ✅ AIRPRO WITH FIBRE FIXATER: Save up to 50% on your Ironing Time with the patented Fibre Fixer Technology! Due to the 6 Layer Thick Cover which includes double-sided Heat reflective Foil with bubblewrap..
  • ✅ NO MORE WATER ON YOUR TABLE: Due to the Anti-drip Technology there is no more water underneath your Ironing Mat. Because of the aluminum layer, the heat reflects which prevents condensations on your Table..
  • ✅ EXTREME IRONING COMFORT: Iron extremely comfortable with the bubblewrap layer, the 1.8 MM Foam layer and the Felt layer. Suitable for all types of irons. This Ironing Mat for Table Top is especially made for Steam Irons and Steam Generators..
  • ✅ SO HIGHLY DURABLE: This Ironing Blanket will last for a very long time and is Scorching and staining resist! The Pad is easily foldable: Perfect for small households!.
Check Stock

Zettokete Sanding Sticks Fit for Gundam Model Craft Hobby,Carbon Fibre Sanding Rod Sanding Block,Ideal for Sanding and Polishing,3 Sizes(3\×0.6\

  • 【Sanding Sticks for Polishing】Fits for all kinds of models polishing and buffing.Use the appropriate sandpaper so you can do automotive sanding,wood furniture finishing,metal finishing,plastic application,art and craft..
  • 【Reduce Your Burden on Polishing】Made from carbon fibre.Light weight but high impact.Wear resistance and corrosion resistance.Super lightweight carbon fiber board reduces the burden on your fingers for better polishing,compared with the heavy metal board on markets..
  • 【Sanding Board for Sandpaper】Our sanding block needs to use together with sand paper(NOT included in package).Paste assorted grit sandpaper,you can have an exact grinding board according to your need.You can also paste two different grit sandpaper on both sides of our sanding stick to facilitate sectional grinding..
  • 【3 Sizes to Meet Your Polishing Needs】3 common sizes suitable for detailing polishing.The 0.6 inch width one suitable for large parts,plane large scale grinding.The 0.4 inch width one suitable for small parts,small-scale plane grinding.The 0.2 inch width one suitable for small parts,holes and narrow position..
  • 【Ideal Gift for Gunpla Model Hobby】Useful gunpla tools fit for gunpla model kits hobby.Good for all kinds of plastic model detailing po....
Check Stock

Encasa Homes Replacement Ironing Board Cover with Extra Thick Pad, Plain Colors, Elasticated, (Fits Standard Large Boards of 15 x 54 inch) Heat Reflective, Scorch Resistant, Heavy Duty - Natural

  • SUPERIOR MATERIALS: Our 'Luxury Line' covers consist of a High Performance Cotton fabric, attached to an Extra Thick 5mm Fibre Pads to give exceptional durability and an unbeatable ironing experience. Fabrics are Scorch Resistant to high ironing temperatures, and thick fiber pad gives heat reflection at the same time allowing steam to pass through, thus making the ironing process quick and efficient.
  • PERFECT FIT: Choose the closest sized Ironing Board Cover for your board from 2 SIZES always available in stock. Tightening is done with a very strong elastic bungee cord, which wraps the cover around the board. The elastic can be further tightened if required with an attached clip. This allows a perfectly snug fit for your board with a creaseless ironing surface for effortless ironing..
  • FAST COLOURS: Vibrant colours used for dyeing and printing are tested for fastness to ensure they do not bleed onto your garment. This also allows the cover to be washable in cold water if it gets dirty..
  • OFFER: This offer Includes Ironing Board COVER with PAD Only. You can replace your worn out cover with this cover and immediately find a great difference in your ironing experience. We recommend you should change any covers that is older than 2 years..
Check Stock

Benefiber Taste-Free, Sugar-Free Fiber Supplement Powder for Digestive Health 74 Servings 261g

  • Why choose benefiber, Unlike some fibre supplements, benefiber is invisible, tasteless and dissolves completely, which means you can add it to just about anything. Benefiber makes taking fibre easier..
  • 100% natural fibre, Not getting enough fibre in your daily diet. Benefiber is a 100% natural daily fibre boost. It's clear, taste-free and dissolves into almost anything..
  • How do i use benefiber: Stir 2 teaspoons of benefiber powder into at least 1/2 cup of beverage or soft food (hot or cold) and stir until dissolved. Not recommended for carbonated beverages..
  • How can i add it to my diet: Benefiber won't alter the taste or texture of your foods or beverages. You won't even notice it's there!.
  • Multi-benefit, Benefiber a natural, sugar-free and flavour-free fibre supplement. It is a non-thickening, grit-free powder. 100% derived from wheat..
Check Stock

Ducati Corse SBK 3 Full Face Helmet 981040166 (XL, BLACK)

  • SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight Ergonomic shape. The natural shape of the outer shell lends the Arai helmets a more homogeneous look, ensures greater sealing and better fit on the head, for improved comfort and wearability and minimised turbulence.
  • Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System Detachable, washable hypoallergenic inner lining Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier..
  • VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.
Check Stock

Ducati 77 Full face Helmet 98104677 (L)

  • SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
  • Detachable, washable inner lining Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure.
  • Wider visor for a perfect peripheral vision. The wider visor aperture gives better visibility on bends CE-approved thermoformed visor, scratchproof and anti fog VAS Visor (patented) with V-shield base plate, 5mm longer and 10mm wider than the previous model.
  • * This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).
Check Stock

Siveit 8 Slot Sunglass Organizer Leather Eyeglasses Collector Eyewear Display Case Storage Box, Black

  • ... HIGH QUALITY MATERIALS: This stylish leatherette box is made of moisture-proof PU leather exterior. We don’t use cheap paper board because it is easy to break and shed the surface. We replace it with higher density board to avoid shedding. The inner compartment part is made of high-density fibre board pressed from wood powder rather than flimsy cardboard..
  • ANTI-SCRATCH GLASS TOP: We use the transparent glass as the top window because it helps to beautifully display your collections and you can easily pick your favorite pair of glasses for any occasion. What’s more, glass material is more anti-scratch than PMMA (acrylic). It’s hard to be scratched and its service life is longer. But it is unavoidable that the glass may be broken when crashed. Please feel free to contact us if it is broken, we will provide you with a satisfactory answer..
  • VERSATILE APPLICATION: The sunglass storage box can be used for exhibition display, home ornament, personal storage, professional makeup artist, jewelry collectors,or you could send the sunglass box as a jewelry box gift for your family or friends..
Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (M)

  • Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
  • Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
  • Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
  • External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
  • * This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).
Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (L)

  • Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
  • Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
  • Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
  • External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
  • * This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).
Check Stock

Ducati Tour V4 Full Face Helmet 98107232 (XL)

  • Hyper Ridge is a reinforcement band that circles the bottom of the shell adding strength and lowering the helmet’s centre of gravity. Flares out for easier putting on and taking off SFL (Super Fibre Laminate). This is the basic Arai outer shell and is therefore sometimes referred to as ‘Standard Fibre’ although it actually is Super fibre. Super fibre provides more comfort than other shell materials, yet is still strong and lightweight.
  • Emergency Release System: both cheek pads and the neck roll can be removed quickly thanks to the advanced Emergency Release System.
  • Facial Contour System (FCS). A foam spring support in the cheek pad that compresses and rebounds makes putting the helmet on easier. The cheek pad wraps under the jaw- and cheekbone instead of mostly on the soft cheek area. FCS offers a looser fit with secure support over a larger area providing superior stability and comfort with minimal pressure Detachable, washable interior made in fresh and light Dry-Cool material Hybrid multiple density foam EPS liner.
  • External shell in three sizes Racing closure with D-ring fastening, with button to secure the strap Reflective panels.
  • * This product meets or exceeds Federal Motor Vehicle Safety Standard 218 (FMVSS 218).
Check Stock

Rannb End Mill Cutter 1/16\ Cutting Dia 1/4\ Shank Dia 4 Flutes End Mill Drill Bit - 5pcs

  • ⭐【Material】The end mills are made of High Speed Steel,high hardness,good wear resistance and durability..
  • ⭐【Pack of 5pcs】Sold in pack of 5pcs of end mill cutters..
  • ⭐【Good Design】 Large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • ⭐【Applicable Material】Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium.And Circuit boards,Metal,Majority of plastics, Wood, Fibre glass, Carbon and environmental board..
  • ⭐【Heat Treatment Process】The High Hardness Steel go through the heat treatment process so the end mill is more durable. Reduce changing times and improve the production efficiency..
Check Stock

Optic Fibre Cutter, Opitcal Fiber Cleaver Auto Return for Cold Connection

  • Practical Use: Can be widely used on 0.25mm, 0.9mm and 3.0mm optical fiber with 125μm diameter, the cleaver is useful..
  • Better Design: Auto blade return design along with waste fibre box brings more convenience to optical fibre cutting..
  • Safer Working: Also works effectively in preventing optic fibre from breaking, very safe and reliable in operation..
  • Reliable Work: The cutting angle is about 0.6°, which will meet your work needs for cold connection and hot melting..
  • Smart Cutting: Adopting tungsten carbide blade with high hardness to ensure cutting and high working accuracy..
Check Stock