Top Fibo Steels Reviews

E7018 3/32\ 1/8\ 5/32\ Premium Arc Welding Rods Carbon Steel Electrode 60 lb (10 lb x 6-pks) (1/8\ 60 lbs)

Cold rolled steels, or other steels containing high sulfur or selenium.
Low alloy and mild steels when stress relieveing normally would be required but cannot be done.

Check Stock

Professional Knife Steel Magnetized for Safety. Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use, Perfect for Chefs and Home Cooks Alike! (10', 3 Dot)

MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also cause tiny metal particles from your blade to become airborne. Our honing rods are magnetized to prevent those particles from being inhaled or landing on nearby food..
BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was meticulously chosen. You won’t find cheap plastic handles or soft, inexpensive steel. When you hold it, the weight immediately reveals how solid the construction is, and the design adds class to any kitchen..
NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This is contrary to knife sharpening steels or wet stone sharpeners, which should be used sparingly. (More details in product description.).
DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth to remove the metal particles. For....

Check Stock

EZARC Carbide Reciprocating Saw Blade R678HM Endurance for Thick Metal, Cast Iron, Alloy Steel 6-Inch 8TPI, 3-Pack

[Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
[Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction steels, stainless steels, rebar and car beams.
[Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels..
[Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.
[Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc..

Check Stock

SPEED TIGER ITBTA Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4\Shank 3\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan

GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Tip Radius: 0.5mm, Cutting Length: 1-1/4.

Check Stock

SPEED TIGER ICSM Chamfer End Mill - CNC Carving Bits, V Groove, 60 Degree, 1/4\Shank 2\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan(1 Piece, 60 Degree)

GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Ideal for Chamfering, Carving V Groove, Centering.

Check Stock

Forney 30810 Welding Rod, 1/8-Inch

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
Not recommended for use with low open circuit-Voltage OCV power sources.
Excellent for tack welds and out of position welding.
Ideal for general fabrication of cold roll steels.

Check Stock

AUTOTOOLHOME 3/16' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/16 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
Carbide milling bits Diameter: 3/16'', Shank Diameter: 3/16'', Flute length: 5/8'', Overall Length: 2", 4 Flutes.
This 3/16 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill router bits are used for side milling, end milling, finish machining, etc..

Check Stock

AUTOTOOLHOME 3/8' Carbide Square End Mill for Micro Grain Carbide Milling Cutter for Alloy Steel Hardened Steels 4 Flutes HRC50 (1, 3/8 in)

AUTOTOOLHOME 600 Nano carbide end mill tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
Carbide milling bits Diameter: 3/8'', Shank Diameter: 3/8'', Flute length: 1'', Overall Length: 2-1/2", 4 Flutes.
This 1/4 inch square drill bit,highly optimized carbide material and coating pairing means superior wear and chipping resistance in your cutting applications.
End Mill spiral router bits are used for side milling, end milling, finish machining, etc..
Unequal flute spacing and irregular helix flutes ensures stable machining of difficult-to-cut materials and higher efficiency,Vibration absorption provides stability, high efficiency finishing and improved chip disposal.

Check Stock

5PCS 1/2' Carbide Square End Mill Bits Set, Milling Bits Cutter 1/2 Carbide End Mills for Alloy Steels/Hardened Steels, HRC 45 Deg Single End 4 Flute AlTiN Coating

Package Included: 5pcs 1/2" carbide square end Mill.
Material: Made of micro grain carbide. Carbide has higher hardness and wear resistance and excellent cutting performance than high-speed steel..
Coating: AlTiN, high aluminum content provides excellent hot hardness and oxidation resistance..
HRC 45 deg :carbide end mill tools excel at working carbon steels (~ HB225), alloy steels (HB225 ~ 325), pre-hardened steels (up to HRC45), hardened Steels (HRC40 ~ 45), cast iron..
Flutes:4 Flutes,high rigidity ,widely used in shallow slot,profile milling,and finish machining..

Check Stock

Forney 30701 E7018 Welding Rod, 3/32-Inch, 1-Pound

All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
Not recommended for use with low open circuit-Voltage OCV power sources.
Excellent for tack welds and out of position welding.
Ideal for general fabrication of cold roll steels.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8\4T - Made in Taiwan (1 Piece, 3/8\)

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/8'4T - Made in Taiwan (5 Pieces, 1/8')

GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
Great performance at a competitive price.

Check Stock