Top Fiberglass Pipes Reviews

LA CHOPPERS LA-1220-24 2\ x 24\ Universal Baffle/Packing Baffle (Stainless Tube)

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 1.75" OD pipes (Baffle Diameter 1.6" - Length 8")003c/p003e.
Check Stock

Thermwell Products 12\X15' Fbg Insulation Sp55 Pipe Insulation

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

Prime Wire & Cable PHC42W06 DE-ICING CABLE WATER PIPE FREEZE PROTECTION

  • 6 ft. Black water pipe heating cable, 42 watt.
  • Stops metal and plastic pipes from freezing down to -40°f/-40°c.
  • Built-in thermostat automatically turns on at 40°f/4°c.
  • Materials required (not included) aluminum foil (recommended for plastic pipe).
  • fiberglass tape or similar with temperature rating 80 degrees C/175F or higher.
Check Stock

6 Inch Carbide Hole Saw Bit Concrete Hole Saw 152mm Carbide Hole Cutter Drill Stucco Brick Fiberglass Reinforced Plaster And Ceramic Tile Saw Through Cement Block and Drywall For Recessed Lighting

  • ...rbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

4 Inch Carbide Hole Saw Bit Concrete Hole Saw for Dryer Vent and Drywall for Recessed Lighting 102mm Carbide Hole Cutter for Stucco Brick Fiberglass Reinforced Plaster Ceramic Tile and Cement blocks

  • ...rbide Hole Saw Kit Or Individually From 5/8 16mm To 7" 178mm, These Tungsten Holesaw Bits Are Also Available Including Hex Hole Saw Arbor Or Including Sds Plus Hole Saw Arbor Mandrel inc TCT Pilot.
  • WHO USES OUR CARBIDE HOLE SAWS Plumbers Electricians Contractors for Masonry Tools Home Builders Boat Builders Aviation FiberGlass Car Body Installers Fiberglass Pool and Fiberglass Tub Manufacturers Carbon Fiber Modellers Hobbyists..
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 2.86\ - Length 8\ - For 3\ OD Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 3" OD pipes (Baffle Diameter 2.86" - Length 8")003c/p003e.
Check Stock

V-Twin 30-0372 - V-Slot Type Steel 2-1/4\ Pipe Baffle Set

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.25" OD pipes (Baffle Diameter 2 1/8" - Length 8")003c/p003e.
Check Stock

Universal Motorcycle Steel Baffle With Packing - Baffle Diameter 1.85\ - Length 10 - For 2.0\ Outer Dimension Pipe

  • 003cp003eUniversal steel muffler baffle with fiberglass packing. Perfect for drag pipes and custom mufflers. Includes mounting bolt.003c/p003e.
  • 003cli003eFiberglass-wrapped steel construction003c/li003e 003cli003eAvailable for a variety of pipe sizes003c/li003e 003cli003eMay require drilling a hole in the exhaust pipe003c/li003e.
  • 003cp003eSize corresponds to muffler pipe outer diameter.003c/p003e 003cp003eFor 2.0" OD pipes (Baffle Diameter 1.85" - Length 10")003c/p003e.
Check Stock

1/2\ Floor Flange, Home TZH Malleable iron Pipe Fittings for Industrial vintage style, Flanges with Threaded Hole for DIY Project /Furniture/ Shelving Decoration (20 Pack)

  • Cross for connecting and branching four pipes.
  • Female NPT threads for connecting to male NPT threaded pipes.
  • Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance.
  • Handles pressures up to 150 psi at 70 degrees F.
  • Schedule 80 polypropylene for a thicker wall than schedule 40.
Check Stock

Frost King F17XAD Pre-Slit Tubular Fiberglass Cover with self-Sealing Jackets (Bulk) for 3" Pipes

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

Electric Water Pipe Heating Cable with Thermostat for Pipe Freeze Protection, 6ft 120V Snow De-Icing Cable with Build in Thermostat, Pipe Warmer, Heat Pipe Tape - CSA/ETL Listed

  • ✅ 003cb003e[100% Money-Back Guarantee] 003c/b003e--Customer satisfaction is our priority. If for any reason you're not completely satisfied, you can ask for a replacement or full refund, no questions asked. Buy with confidence!.
  • ✅ [High quality]--UL, ETL and CSA certified,more safer to use.Industrial grade heat shrinkage tube for connection.Each Cable consists of tough XLPE inner insulation, AL foil, a continuous ground braid as well as weather and non-supportive climatic conditions resistant PVC (high-low temperature) outer coating. Can convert 100% of electrical energy into heat without energy loss..
  • ✅ [Note]--Maximum 1/2 in fiberglass insulation was used over the heating cable for lower temperature protection. Pipes must be at least 3 feet and at least 3/8'' and less than 1 1/2'' in. diameter. No crossing. No spiral. No overlap itself. Only straight. If the ambient temperature is lower than -20°F(-29°C), please use 1" thick insulation material..
  • ✅ [Application]--Suitable for use on water filled plastic ((including PEX)and metal water pipes(including copper, galvanized, ABS plastic, PVC plastic pipes, etc).Not use for empty water pipes, fuel lines, hoses, gutters, steam lines and so on.Keeps water flowing down to -40℃..
Check Stock

Midline Valve 8434P Sillcock Pipe Chrome Plated Brass Body Frost 1/2 inch PEX Connection and 3/4 inch Hose Bib Lead Free, 12

  • Commercial grade high temperature self sealing fiberglass tube 1/2″ thick and 3 feet long with reinforced foil & paper wrap.
  • Used for pipes immediately exiting furnace and water heaters, where foam pipe insulation might not be appropriate.
  • If your ductwork and your hot water pipes are not properly insulated or not insulated at all, you could be wasting up to 40% of your monthly home energy bill.
  • Frost King’s pipe and duct insulation solutions not only save you money, they’ll make your air conditioning and hot water heater work quickly and efficiently.
Check Stock

U406-020 2 90 DEG EL

  • 90-degree street elbow for connecting a male-ended and a female-ended pipe at an angle.
  • Male NPT threads on one end and female NPT threads on the other for connecting pipes with different ends.
  • Precision molded in sterilizable polypropylene for dimensional stability and reinforced with fiberglass for added durability, strength, and chemical resistance.
  • Handles pressures up to 150 psi at 70 degrees F.
  • Schedule 80 polypropylene for a thicker wall than schedule 40.
Check Stock