Top Fiber Optic Transceiver Reviews

StarTech.com PCI Express Gigabit Ethernet Fiber Network Card w/Open SFP - PCIe GbE SFP Network Card Adapter NIC - Fiber Optic SFP Adapter (PEX1000SFP2)

Connect a PCI Express-based desktop or rackmount PC directly to a fiber optic network using the Gigabit SFP of your choice.
PCIe GbE Fiber Network Card with Open SFP Slot.
Adapts to your network configuration using the fiber transceiver of your choice, through an open SFP slot.
No electronic interference provides a secure fiber network infrastructure through a direct fiber-to-desktop connection.
Fits into full or low-profile/small form factor (SFF) systems, with a dual profile design.
Compatible with most Gigabit SFP modules.
Supports Full/Half-duplex Auto-Negotiation, Auto-MDI/MDIX.
Includes low-profile/half-height installation bracket.
Compliant with IEEE802.3z 1000Base-SX/LX, IEEE 802.1Q VLAN Tagging, IEEE 802.1P Layer 2 Priority Encoding, IEEE 802.3x full duplex flow control, RFC 1157 SNMP v1.

Check Stock

Mini 3G SDI Fiber Extender 1080P 3G-SDI Over Fiber Converter Broadcast Level SDI Video Fiber Optic Converter Include SFP Module Single-Mode Single Fiber 20km with RS485 Tally Loop Output

3G-SDI Video: The SDI Fiber converter support 3G/HD/SD SDI with 8-channel audio embedded, resolution up to 1080P&60HZ, Automatic reclocking 270Mbit/s - 1.48Gbit/s - 3Gbit/s.
Support Rs485&Tally: The 3G SDI to fiber converter support both Backwards RS485(Max 57600) and Tally. You can control other device or use Tally Function in broadcast.
Small Size: The 3G SDI Fiber Extender only 2.8*1.7*0.9 inch in size, it’s very compact and can install on cameras.
Loop output: The 3G SDI Fiber Optic transceiver support loop output, you can see the image easily in local side.
Support CWDM/DWDM SFP: The Fiber optic support CWDM/DWDM technique. You can use CWDM/DWDM SFP module when you only have limited fiber cable resource.

Check Stock

QSFPTEK 10GBASE-ER SFP+ Module, 10giga Mini GBIC SFP 1550nm, 40km, 10GE Gigabit Ethernet DDM LC Single-Mode Fiber Optic Transceiver for Cisco SFP-10G-ER, Ubiquiti, Netgear, Mikrotik

Wide Compatibility: Compatible for Cisco SFP-10G-ER, Ubiquiti, Mikrotik, D-Link, Supermicro, Netgear and Other Open Switches. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
10GBASE-ER SFP+ fiber module: 10Gb/s data rate, duplex LC connector, 1550nm wavelength, the transmission distance up to 40km, working temperature: -5℃ ~ +70℃, Tx Power(dBm): -2 ~ 4, Rx Sens.(dBm): ＜ -15.8..
Easy to use: SFP+ 10G single-mode transceiver, plug and play, hot-pluggable. DDM support: DDM allows you to monitor the critical information, to find out some potential problems..
100% high quality products: We always strictly control product quality, every module had been individually tested on switches before shipping, customers can rest assured to buy..
We offer many compatible options, if your brands are not listed here, please contact us. QSFPTEK is a manufacturer of transceiver, customized service is available..

Check Stock

4 Pack 1.25G 850nm Multimode SFP LC Transceiver Fiber Module 550 Meters 1000Base-SX LC MMF for Cisco GLC-SX-MMD/SX-MM/SFP-GE-S,Fortinet,Ubiquiti UniFi UF-MM-1G,Mikrotik S-85DLC05D Meraki MA-SFP-1GB-SX

with Advanced DDM Function to monitor real-time parameter and state on fiber links. SFP MSA Compliant, IEEE 802.3z compliant..
Plug and Play & Durable: Hot-swappable, Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
Low Power Consumption: The power consumption is only less than 1watt, that can save costs wisely. GESD will always provides innovative and cost-effective optical networking solutions. Each sfp module is individually done test before packing..
Widely Used in fiber switches, routers, NIC, server or other fiber optic equipments with 1Gb SFP ports.★ Compatible with MSA compliant equipment Cisco Meraki,Ubiquiti,D-Link, Supermicro,TP-Link,Broadcom,Linksys and Huawei,Mikrotik,Netgear,Supermicro Other Open Switches..
If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options). ★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver....

Check Stock

Fiber Optic Wands (Box of 48) - Fiber Optic Wand with 3 Light Modes (White)

White Fiber Optic Wands - Bulk Box of 48 Fiber Optic Wands.
WHITE FIBER OPTICS: Elegant white glowing fiber optic strands make these fiber optic wands popular for wedding send-offs, anniversary celebrations and white dress events. These Fiber Optic Light Sticks are 13 1/2 Inches in length. This package includes 48 bright fiber optic light stick wands..
3 LIGHT MODES: Each White Fiber Optic Wand has 3 different light modes that include Steady Light Mode, Fast Flashing Mode and a Slower Flashing Mode..
BATTERIES INCLUDED: White Glowing Fiber Optic Wands each come with pre-installed batteries and are ready to go right from the package. Simply remove the battery protection tab and press the button to turn the White Fiber Optic Wand on..
USES: Fiber optic wands for Wedding Send Off, LED Sparkle Sticks, Festivals, Christmas Party Light Wands, New Years Glow Wands, Concerts, Sporting Events, Glow Party Light Sticks and Entertainment. Fantastic for Glow Party Celebrations and as light up sparkler glow wands for wedding send off..

Check Stock

SFP+10GBASE-T Transceiver Copper RJ45 10Gbe SFP Module Compatible for Cisco SFP-10G-T-S, Meraki MA-SFP-10G-T, MikroTik, Unifi, Netgear, QNAP, Supermicro, Cat6a/ Cat7, 30m

[Wide Compatibility] Compatible for Cisco SFP-10G-T-S (NOT support on Cisco Nexus Series and Cisco Meraki Series), Netgear AXM765, D-L ink DEM-440XT, Mikrotik, Supermicro, and Other Open Switches..
[Easy to Use] Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Widely used in fiber switches, routers, NIC, server or other fiber optic equipments with 10Gb SFP+ ports..
[High Quality] All of products are manufactured under strict quality control system, every module has been tested one by one on different switches before shipping, to ensure compatibility with different brand of switch..
[After-sales Service] 30-day free return, 3-year warranty, lifetime technology support. QSFPTEK is a manufacturer of transceiver. We offer many compatible options. If you are not sure about the compatibility of your device, please feel free to contact us..

Check Stock

Mini 3G-SDI Video Extender with SDI Loop Output 1080P 3G-SDI Fiber Converter Extension of Distances Up to 20km Over Single-Mode Optical Transceiver with Tally or Reverse RS485

3G-SDI Optical Transceiver supports 1-channel 3G/HD-SDI Video (audio embedded) & Tally or Reverse RS485 signal transmitted via fiber optical cable, and monitor the signal locally over a 3G/HD-SDI loop output.
HD Fiber Converters includes one transmitter and one receiver for 1080P 3G/HD-SDI signal, transmits video signals up to 20km over a single fiber optic cable.
Each channel includes 8-channel audio embedded, automatic cable equalization, used for all rate below 3.2 Gb/s (Belden 1694A).
Directly compatible with 3G/HD-SDI camera systems, support hot swap and hot plug.
Handle all Pathological patterns, fully digital non-compression broadcast level transmission.

Check Stock

Fiber Optic Jacket Stripper Coaxial Cable Stripping Cutter Tool Cable Cutter Crimper 45-163 + 45-162

ADJUSTABLE BLADES - This fiber optic buffer tube stripper has adjustable blades that you can set for any depth to ensure nick-free jacket entry into fiber optic buffer tubes.
EASY TO USE - This fiber optic stripping tool provides a comfortable and secure grip that helps make the fiber optic stripping process easy and efficient.
FIBER OPTIC STRIPPER - CATV UTP/STP Fiber optic stripper used for stripping simplex fiber and a variety of fiber optic cable. 45-162: for (0-1/8") / (0-3.2mm) Coaxial Cable, 45-163: for (1/8-7/32") / (3.2mm - 5.6mm) Coaxial Cable..
WIDELY APPLICABLE - Fiber optic tools can also be used to screen twisted pair cable, Twisted stranded cable, CATV cable, CB cable, SO, SJ, SJT and other types of flexible power cord.
UNIQUE DESIGN - 45-162 / 163 coaxial stripper is easy to carry and use. It is very suitable for family or daily use..

Check Stock

Winzwon Car Led Lights Interior 4 Pcs 48 Led Strip Light for Car with USB Port APP Control for iPhone Android Smart Phone Infinite DIY Colors Music Microphone Control

▸【10 Meters (32.81ft) Optic Fiber Band Car Ambient Lights Interior】 Sewing edge: 3.0mm. Led Power: 1W (DC 12V)..
▸【Flexible & Cuttable Optic Fiber Cable】 With 0.5mm thickness fin easily fix the fiber optic into the gag of door panel. With 1mm clip makes the fiber optic coincide with the gap of door panel, firm, not easily fall off. The optic fiber pipe can be cut for your needs..
▸【Simple Fiber Optic Installation】 Step 1: Using the scraper to fix the fiber optic into the gap of door panel. Step 2: When cutting, make sure that 12mm is fully inserted into the light source, and then cut the fin. Step 3: Fix it with a screwdriver, take care not to tighten it, otherwise it will not transmit light..
▸【Usage】 For all kinds led fiber optic illumination engine and decoration such as optical fiber hanging lamps, ar interior decoration, Artistic adornment in graphical and 3D artistic design.
Interior fiber optic light decoration of KTV, pubs, coffee houses, hotels and restaurants and so on..
▸【Safe to Use】 IP68 Waterproof, Environmental protection, low power consumption, high brightness, extremely low heat, touchable and safe for children. Package included: only 6mts optic fiber (not including the LED light sources)..

Check Stock

4PCS 1000BASE-T Gigabit SFP to RJ45 Copper Ethernet Modular Transceiver for Cisco,Meraki,Ubiquiti,D/TP Link,Supermicro,Netgear,Broadcom, 1.25G SFP-T CAT5E/CAT6 up to 100m Mikrotik S-RJ01

...AS), Storage Area Network (SAN), and High Performance Computing (HPC) applications Low power consumption and low EMI emission design SFP RJ45 module.
Hot-pluggable with advanced ESD protection..
Easy to use & Durable: Plug and play, hot-pluggable. Rotate the ring latch down at 90 degree angle to unlock, then pulling transceiver out from switch. Less than 1.05W power dissipation and heat-conducting gasket provide superior heat dissipation function..
GESD is a professional manufacturer and accept customized orders. If you are not sure about the compatibility of your device, please feel free to contact us for customized SKU to meet your needs(We offer many compatible options).★After-sales Service:30-day free return,3-year warranty,lifetime technology support.We produce high quality transceivers,every transceiver has been tested for 28 steps before shipping..

Check Stock

FTTH Fiber Optic Tool Kit 18 in 1 with Fiber Optical Power Meter and 1KMVisual Fault Locator and Cable Cutter Stripper Tool 6C Fiber Cleave Multi-Function Equipment Tool

aluminum alloy visual fault locator fiber optic cable tester meter for CATV test Universally connector for test different ST,SC,FC interfaces.
Handheld fiber optical power meter FC SC cable tester, Wavelength range: 800~1700,Power measurement range: -70~+10.
6C High Precision Fiber Cleaver is an instrument for high precision fiber cutting.It is a multi-purpose optical fiber cutter, the product uses the 16 cutting points and has a longer service life ..
FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250FTTH fiber optic drop cable stripper is used to peel 250 coating of 125 fiber optic coating of fiber optic coating of fiber optic.

Check Stock

Fiber Cutter Stable Performance High Automatic Blade Return Lightweight Fiber Cutter (Orange)

Cutting Process: The average cutting angle of our fiber optic meat cleaver is less than 0.5 degrees, there are 16 cutting ends, the clamps have three cutting methods, 0.9mm pigtail slot, 0.25mm bare fiber slot, 2.5 to 3.0mm skin cable slot..
High Accuracy Cutter: Meanwhile, the cutter of this fiber optic cleaver is also high accuracy, stable angle, automatic cutter return, fluent and non jamming, skinned fiber optic cable cutting, no need to replace the line jig or length setter..
Thickened Rigid Slide: Our slide is made of strictly selected materials, thickened to become high and rigid, sturdy and practical, you can do term use..
Made by CNC Processing: Our fiber optic cleaver is made of aluminum alloy, tungsten steel and ABS three materials and made by CNC processing machine..
Small Error: Our fiber optic cleaver has high accuracy and small error, which can support your more detailed fiber optic work without problems..

Check Stock

Ethernet Cable Fiber Optic

The Residential Solution - Our SC APC fiber optic ethernet cable extender is the Fiber cable of choice for Fiber to the home Networks.
Compatible with - Verizon Fios, ATT internet cable, Google Fiber, Century link, UniFi Dream machine and more FTTH Fiber optic networks & hardware.
50% Thicker Jacket - Our 3mm cable is more robust than the standard network fiber optic cable which is 2mm. This SC APC Singlemode fiberoptic cable meets all UL, cUL, IEC & RoHS.
Fiber Optic Connector Included - SCAPC Adapter included with each cable for easy extension or connection from incoming PON fiber cable.
Save Money - Don’t spend $100+ on expensive single mode sc replacement cable installations when you can DIY for a fraction of the cost.

Check Stock