Top Ferro Phosphorus Fep Reviews

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock

FERROFIRE Mini Smaller Ferro Rods 5/32″ x 3″ Ferrocerium Flint Steel Magnesium for Survival Training Teaching Boyscout Learning (Pack of 20)

Mini ferrocerium rods for training purpose with full function of a ferro rod.
Scout traing ferro rods to strike hot sparks, be care for kid’s safety.
Smaller ferro rods for survival hiking camping emergency training use.
Tiny ferro rods ferrocerium fliont steel megnesium rod for scout teaching boyscout training.
Each of FERROFIRE Ferro Rods is soft enough to be scraped into small curls of ferrocerium that can work great as magnesium to ignite a camping fire with more ease, you will no longer need to buy magnesium rod as tinder..
FERROFIRE branded premium ferro rods are second to none with its stable quality, higher ignition rate, less smoke, each FERROFIRE ferro rod is perfect fire starter for bushcraft, hiking, survival, emergency, camping, fishing and prep purpose..
A premium flint steel rod made by FEFFOFIRE doesn’t need to too long, you can generate much more hot sparks shower at 5,500F (3,000C) temperature with a FERROFIRE fire steel, ferrocerium, ferro rod..
Carbon steel ferro rod striker scraper made by FERROFIRE can easily make sparks shower together with FERROFIRE ferro rods, it’s a perfect mate of fire starting kit, light a camping fire anywhere, any weather condition will no longer stop your passion of bushcraft!.

Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.

Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock

Sovol 3D Printer Resin Vat Anodized Aluminium with FEP Film & Steel Ring Preinstalled Durable Metal Frame Resin Tank with Double Silicone Covers for ELEGOO Mars ANYCUBIC Photon 3D Printer

Sovol 3D resin vat fits for ELEGOO Mars/ Mars Pro/ Mars 2/ Mars 2 Pro/ Mars C, Anycubic Photon/ Photon S/ Photon Mono/ Photon Mono Se , QIDI TECH....
Made of anodized aluminum and durable design for long term usage. Clear and wear-resistance measurements, easier to use and convenient for printing.....
With double silicone covers, keep the resin vat and FEP film away from dust, scratch, UV light source or direct sunlight. Perfect for resin storage..
2021 New design single steel ring with upgraded FEP film, less effort to drill and install, no difference on function. If you need to replace the FEP....
Perfect spare resin vat when you need to change resin color faster and have a better printing experience..

Check Stock

FERROFIRE 3/8″ x 4″ Ferro Rods Ferrocerium Flint Steel Magnesium Survival DIY Fire Starter (Pack of 5)…

Each of FERROFIRE Ferro Rods is soft enough to be scraped into small curls of ferrocerium that can work great as magnesium to ignite a camping fire with more ease, you will no longer need to buy magnesium rod as tinder..
FERROFIRE branded premium ferro rods are second to none with its stable quality, higher ignition rate, less smoke, each FERROFIRE ferro rod is perfect fire starter for bushcraft, hiking, survival, emergency, camping, fishing and prep purpose..
A premium flint steel rod made by FEFFOFIRE doesn’t need to too long, you can generate much more hot sparks shower at 5,500F (3,000C) temperature with a FERROFIRE fire steel, ferrocerium, ferro rod..
Carbon steel ferro rod striker scraper made by FERROFIRE can easily make sparks shower together with FERROFIRE ferro rods, it’s a perfect mate of fire starting kit, light a camping fire anywhere, any weather condition will no longer stop your passion of bushcraft!.
Should you meet any issue after order FERROFIRE product, please contact FERROFIRE customer support, you will have a prompt remedy action from FERROFIRE, trust us, you will never be disappointed..

Check Stock

5PCS FEP Film Release Film for ELEGOO Mars/ANYCUBIC Photon/Photon S/HALOT-ONE LCD SLA DLP 3D Printer, 200 x 140 x 0.15mm

【Compability】Suitable for all desktop LCD/SLA 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars, AnyCubic Photon/Photon S, Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Excellent Ductility】Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..

Check Stock

Calorbot 5 PCS FEP Film 200x260x0.15mm for Anycubic Photon Mono x 6k 4k/Elegoo Saturn MSLA Mono/QIDI Tech S Box/ 8.9 9.25 inch LCD UV 3D Printers

Fep Film Size & Wide Compatibility: (200x260mm.
Quantity: 5 PCS) FEP Release Film for Elegoo Saturn, Anycubic Photon Mono x 6k 4k, 8.9 inch UV 3D Printers, MSLA Mono, qidi tech s-box, Anucubic Photon..
Peeling Force: good peeling performance, meet the release requirement of various products, can be reused..
High transparency: UV transmittance is over 95%, which is perfect for printing and provides product quality..
Corrosion resistance: not affected by almost any strong acid, strong alkali, oxidant, and other solvents, Non-tacky, high cleanliness product surface provides product release and durability..
Easy to install and use: it is very easy to install according to the installation instructions. If you are not satisfied with our Fep Film Or service, we guarantee a full refund. Please Feb assured to buy..

Check Stock

FERROFIRE 5/16″ x 1″ Drilled Flint Steel Ferrocerium Toggles Ferro Toggles with 2 Lanyard Holes for Bracelet Necklace fire Starter (Pack of 10)

FERROFIRE flint toggles with 2 lanyard holes are mate for bushcraft man as an EDC gear to start a camping fire in emergency..
These top quality drilled ferrocerium rods fire steel can be used to generate adequate sparks..
Each FERROFIRE branded premium flint rod’s sparks have temperature up to 5,500F (3,000C) temperature, ignites dry leaves, wood chips with few minutes..
You can use FERROFIRE branded Carbide Steel Striker to light a fire..
FERROFIRE branded 5/16″ x 1″ drilled ferro rods are perfect mate of your discovery, wherever you are they are with you..
Each of FERROFIRE Ferro Rods is soft enough to be scraped into small curls of ferrocerium that can work great as magnesium to ignite a camping fire with more ease, you will no longer need to buy magnesium rod as tinder..
FERROFIRE branded premium ferro rods are second to none with its stable quality, higher ignition rate, less smoke, each FERROFIRE ferro rod is perfect fire starter for bushcraft, hiking, survival, emergency, camping, fishing and prep purpose..
A premium flint steel rod made by FEFFOFIRE doesn’t need to too long, you can generate much more hot sparks shower at 5,500F (3,000C) temperature with a FERROFIRE fire steel, ferrocerium, ferro rod..

Check Stock

Wazoo The Bushcraft Fire Starter Necklace (Black Ceramic)

6Bags Magnesium&1Tin box&Ferro rod with wooden handle(total weight about 5oz).
Up to 12000 time strikes/Please remove the black protect layer before use.
With resealable zip bags full of magnesium, shaved, shreds, chips, spiral and powder.
Box Size: 5” x 3.5” x 1.4” Bag size: 3.5” x 2.3” Ferro rod size 4.9”x0.3”.
3-in-1 firestarter set comes with a ferro scraper that can double as a ruler or bottle opener.

Check Stock

6PCS FEP Film 200x140x0.15mm for ELEGOO Mars 2 Pro, Mars 3, Mars 3 Pro, ANYCUBIC Photon, Photon S, Photon Mono 4K, Phrozen Sonic Mini 4K, Creality Halot-one, LD-002H LCD Resin Printer Fep Replacement

...ini 4K, Voxelab Proxima 6.0, Creality Halot one, Halot one Plus, Halot one Pro, LD-002R, LD-002H etc. Please note that this release film does not have a frame, so it is not suitable for the models that need to replace with the release film with a sealed frame..
High Purity FEP: Special FEP release film for 3D printing, using ultra-high purity FEP. Made of hot melt extruded cast film and has excellent non-stick, high-temperature resistance, electrical insulation, mechanical properties, wear resistance, and other characteristics. Size: 200x140mm.
High-Temperature Resistance: Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
High Transmittance: With over 95% light transmittance, this ultra-transparent film ensures the high stability of UV lightning..
Excellent Ductility: Excellent elongation performance, ductility up to 300%, good flexibility, bending 10000 times..

Check Stock

Phrozen 3pcs FEP Film, for All LCD 3D Printers, Best for Phrozen Sonic Series, Sonic Mini 4K, Sonic Mighty 4K, 3D Printing Accessories (Large A4 Size, 8.27 x 11.69 x 0.006 inches)

【What You Will Receive】Package comes with 3 pieces of 8.27 x 11.69 x 0.006 inches FEP films. This is more than enough to meet your replacement needs, as we recommend replacing these sheets regularly to reduce print failures and create nice quality prints..
【Quick & Easy-to-Install】It's super quick and easy to replace your Phrozen FEP films. Just follow the instructions on the package and you'll be done in no time! If you encounter any difficulties during installation or use, please feel free to contact us. Our support team will be in assistance shortly..
【3D Printing Essentials】Designed to be long-lasting and durable, allowing users to print out high-quality 3D models multiple times. Perfectly smooth, scratch free, perfectly cut, and shipped out in thoughtful protective packaging..
【Universal Compatibility】Besides Phrozen LCD resin 3D printers, Phrozen FEP film is also compatible with other desktop LCD/SLA 3D printers, such as Creality LD-002R series, ELEGOO Mars series, Anycubic Photon series, Creality, and more..
【High Transmittance & Heat Resistant】With over 95% light transmittance, this ultra-transparent film ensures high transmission of UV light, allowing just the right amount of UV to pass through to cure 3D prints in a fast and....

Check Stock