Top Fep Tubing Reviews

Cooler Master MasterLiquid 240 CPU Cooler, All-in-One Liquid Cooler, Dual Chamber Design, 120mm x 2 MasterFan Air Balance Fans

Exclusive Tech - Cooler Master controls quality and builds on decades of innovation wit 100% in-house design and manufacturing. Air flow - 66. 7 CFM. Noise level - 30. 0 decibels.
Dual Dissipation - Our low-profile dual chamber pump bumps up performance and durability over last-gen single chamber pump designs.
Push-Pull Fans - To avoid dynamic loss, the dual MasterFan setup provides added pressure to push hot air through the radiator.
Sleeved FEP - Underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs - inside the cooler.
Twist and Play - Easy installation design. Get a screwdriver and have it running in five minutes.
Intel LGA2011-v3 / 2011 / 1366 / 1200/ 1151 /1150 / 1156 / 1155 / 775 socketAMDFM2+ / FM2 / FM1 /AM4/ AM3+/AM3 / AM2+ / AM2 socket.

Check Stock

Toughest FEP Film Ever, 5X Tougher Than Any Other Brands (140mmx200mm Photon Mono, ELEGOO Compatible), 5 Sheets Laminated with PET Film for Long Lasting Use, 125um Thickness 3DMaterials

[High Quality FEP] 100% Pure FEP film made by DAIKIN Made in Japan Used..
[Strength and Toughness] 50um FEP film with 50um strong optical grade PET film by 25 um silicone OCA.
[x5 Stronger] Tensile modulus of SuperDurable FEP has 50MPa which is 5 times higher than 8MPa of 125um FEP film..
[Protect from Spill] SuperDurable FEP save 3D printer from resin spill created by easy puncture or teared FEP film..
[>95% or Higher Transparency] Pure FEP, optical grade PET and silicone OCA give more than 95% transmittance.

Check Stock

Cooler Master MasterLiquid ML360R ARGB Close-Loop AIO CPU Liquid Cooler, 360 Radiator, Dual Chamber Pump, AMD Ryzen/Intel LGA1200/1151

Exclusive tech cooler master controls quality and builds on decades of innovation with 100 percent in house design and manufacturing.
Dual dissipation our low profile dual chamber pump enhances performance and durability over our last gen single chamber pump designs.
Sizable performance leaps over last gen technology.
360 millimeters radiator our aluminum 360 millimeters large surface radiator will remove excess heat from the CPU and cool with maximum efficiency.
Addressable RGB LED addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+ (To be released soon).
Sleeved FEP underneath sleek black sleeves, FEP material beats rubber tubing in keeping liquid where it belongs inside the cooler.
Fan air pressure: 2.34 millimeter H2O (Max).
CPU socket support: Intel LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.

Check Stock

Cooler Master MasterLiquid ML360P Silver Edition Addressable RGB Close-Loop AIO CPU Liquid Cooler, 360 Radiator, AIO SF360R Fan, Independently-Controlled LEDS for AMD Ryzen, Threadripper/Intel 1151

360mm Radiator – Aluminum silver finish 360mm Radiator to remove excess heat from the CPU and cool with maximum efficiency. Air flow – 45 CFM. Noise level – 30 decibels.
Integrated fan design – integrated three 120mm fans into one 360mm square frame unit for a quick install and reduce loss of airflow to the radiator.
Dual dissipation – our low-profile dual chamber pump enhances performance and durability over our last-gen single chamber pump designs..
Fewer wires to worry about – Easy cable management with just 2 connectors for the integrated 360mm fan design.
Addressable RGB LED – addressable RGB LEDs on the pump and fans for full color customization that can be controlled through Cooler Master software master plus+.
Sleeved FEP – underneath sleek black sleeves, FEP material beats rubber tubing in keeping Liquid where it belongs – inside the cooler.
Cpu socket support – LGA2066, LGA2011-v3, LGA2011, LGA1151, LGA1150, LGA1155, LGA1156, AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.

Check Stock

Siraya Tech 2 Pcs NFEP Film - A4 Size (210 X 297mm) Better Durability Fewer Layer Lines Accurate Print Results Great for Resin Printing Better Performance Over FEP for LCD DLP 3D Printers

Higher Print Success - Siraya Tech NFEP Film is an upgraded version of the FEP film. It is made of stronger materials and can create more accurate and smooth prints. It greatly improves the success rate of printing. Siraya Tech NFEP Film is very suitable for resin printing and has better performance than FEP film..
Better Durability - Siraya Tech NFEP Film allows users to print out high-quality 3D models multiple times without changing the film frequently. Siraya Tech NFEP Film is more durable and long-lasting than traditional FEP film..
Fewer Layer Lines - Siraya Tech NFEP Film has a higher-quality surface than FEP film so that the generated print model does not have too many serious layer lines, and more high-quality models can be printed..
Accurate Print Results - Siraya Tech's high-quality NFEP film was originally developed for laser SLA printers and large-format MSLA. Its peeling performance is better than standard FEP film, and more accurate printing results can be obtained..
Faster Print Speed - Siraya Tech NFEP Film is faster than ordinary FEP film printing models because our NFEP Film has ultra-high ultraviolet light transmittance, which can allow an appropriate amount of ultraviolet curing..

Check Stock

Cooler Master MasterLiquid LC120E RGB Close-Loop AIO CPU Liquid Cooler, 120mm Radiator, Dual Chamber RGB Pump, Dual MF120R RGB Fans w/ RGB Lighting Sync for AMD Ryzen/Intel1151/2066

Liquid Cooling System:The cooler master LC240E delivers efficient cooing with our dual pump 120 millimeter fans.
It keeps your system running effectively, even in the high load times.
Dual Chamber: Our low profile dual chamber pump delivers sizable performance leaps over last gen technology.
120 millimeter fans: These fans keep a good flow going to your key systems.
Sleeved tubing reinforced FEP tubing to keeps the tube kink free and the liquid flowing to your CPU.
Rgb Controller: allows you customize colors and light effects.
CPU socket support: Intel: LGA2066, LGA2011 v3, LGA2011, LGA1151, LGA1150, LGA1156, LGA1155, LGA1366, AMD: AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.

Check Stock

LANKEGU 3 PCS nFEP Film 260x200x0.127mm NFEP Film Sheet, nFEP(PFA) Release Film fo ELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch LCD Resin 3D Printers

NFEP film is big improvement over traditional fep film: Better durability, fewer layer lines, accurate print results, Great for Resin Printing..
High print success rate: NFEP Film offers excellent peel performance over standard FEP film. As such you will have much less failed prints as compared to using FEP films, and prints don't stick to nfep nearly..
High transmittance: The 3D release nfep film has high transmittance, and the transmittance is over 95%, which makes the printed products more perfect and provides product quality..
Easy to install, thinner than fep: simply follow the instructions comes with the package, you can easily replace the NFEP film in a few minutes. (NOTE: NFEP is softer than standard FEP and thus easier to scratch.Please use caution when installing and cleaning.).
NFEP Film is the best choice for printing a perfect model: 260*200*0.127mm nFEP(PFA) Release Film fit fo rELEGOO Saturn, Saturn S, Photon Mono X, Mono X 6K, M3 Plus, Sonic Mighty 4K 8.9-9.25 inch resin 3D Printers..

Check Stock

5PCS FEP Film 260x200x0.15mm, Release Film for Anycubic Photon Mono X 6K/ELEGOO Saturn/phrozen Sonic Mighty 4K/ 8.9 inch UV 3D Printer

【Compability】Suitable for Anycubic Photon mono X/Photon S/ELEGOO Saturn/Creality LD-002H/QIDI Technology S Box and other 8.9 inch UV 3D printers..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock

6PCS Creality FEP Film Release Films 200 x 140 x 0.15mm for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini 4K/Creality Halot-one/LD-002R/LD-002H LCD SLA DLP 3D Printer

HIGH TRANSMITTANCE - The 3D release film, with high transmittance of over 95%, makes more perfect printing. Thickness: 0.15mm. Size information: 200 x 140mm. Package: 6 PCS Film..
WIDE COMPATIBILITY - Fit for ELEGOO Mars/Mars 2 Pro/Mars 3/ANYCUBIC Photon/Photon Mono 4K/Phrozen Sonic Mini/Phrozen Sonic Mini 4K/Halot-one/LD-002R/LD-002H/CL-60/Wanhao UV/MonopriceMini Deluxe/Nova3D/EPAX X1. Note: Not Fit for Halot one plus/Photon Mono S 3D Printer. Please confirm whether this FEP Film is compatible with your 3D Printer Before buying..
HIGH PURITY FEP - Special FEP release film, using ultra-high purity FEP resin. It is made from hot melt extruded cast film. It has excellent non-stick, high-temperature resistance, insulation, wear resistance, and other characteristics..
HIGH-TEMPERATURE RESISTANCE - Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
STABLE RELEASE FORCE - FEP melts at high temperature, passes through the extrusion equipment, and is poured into a similar plane to form with uniform thickness. Long-lasting durability, and stable release force. Strong ductility, excellent ductility, ductility up to 300%..

Check Stock

5PCS FEP Film 200x140x0.15mm, Release Film for Elegoo Mars 2 Pro/AnyCubic Photon/Photon Mono/Creality LD001/All 5.5 inch UV Resin 3D Printer

【Compability】Suitable for all desktop LCD/SLA/UV 3D Printer which print size no more than 200 x 140mm, such as ELEGOO Mars 2 Pro/Anycubic Photon /Photon Mono/Creality LD-001..
Quantity: 5 pieces. Special FEP release film for 3D printing, using ultra-high purity FEP resin. It is made of hot melt extruded cast film. Has excellent non-stick, high temperature resistance, electrical insulation, mechanical properties, wear resistance and other characteristics..
【High Transmittance】With over 95% light transmittance, this ultra-transparent film ensures high stability of UV lightning..
【High Temperature Resistance】Long-term working temperature 205 ℃, melting point 260 ℃. Perfectly smooth, scratch free, perfectly cut, and shipped in thoughtful protective packaging..
【Easy to Installation】 Easy to install, there are simple and easy-to-understand tutorials on the package to guide you to replace the FEP film..

Check Stock

FEP Film (Ultra Pure FEP) / 1 MIL (.001\) (.025mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
Use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printers.

Check Stock

FEP Film (Ultra Pure FEP) / 5 MIL (.005\) (.127mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock

FEP Film (Ultra Pure FEP) / 2 MIL (.002\) (.05mm) Thick / (12\ Wide x 10' Long Roll)

Fluorinated Ethylene Propylene (FEP) Film.
It is recommended to use at least 5 MIL or 10 MIL Thick FEP FILM w/ 3D Printer Applications.

Check Stock