Top Female Threaded Ball Valve Reviews

Hromee Extended Tank Drain Assembly Kit with 10 Inch Braided Steel Hose 1/4 Inch Drain Valve and Elbow Fitting for Air Compressor

• ...dditional drain hose or elbow. A thread seal tape is equipped with this drain kit for multiple use to prevent leaks..
• There is a Hex bushing brass adapter which is 3/8" Male x 1/4" Female for connecting two pipes or with different diameters. Has a 3/8” male NPT threaded on one end and a 1/4” female NPT threaded on the other for connecting a female and a male pipe or fitting with different diameters Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..

DAN SPEED 1.5 NPT Female Threaded Full Port Ball Valve with Blue Vinyl Lever Handle,316 Stainless Steel,WOG1000

• Body & Ball Type:Full Port, Low Operation Torque,Temp Range:-60F to 450F.
• The valve is fitted with PTFE seals for maximizing corrosion resistance and lifespan of the ball valve.
• This ball valve is made of Stainless Steel 316 and has a plastic-covered lever handle for on/off manual control.
• Nominal Working Pressure:1000 WOG:Max 1000 psi for Water, Oil, Gas. Fluid Medium:For use with liquids and gases.
• This inline valve has a Standard port flow and 1.5" female National Pipe Taper (NPT) threads for connecting two male threaded pipe fittings going in....

HydroTools by Swimline Precision Male & Female Threaded Ball Valve for Pools

uxcell Ball Valve, G3/4 Female Thread PVC Valve for Aquarium Setup, Sump Pump, Pool, Garden Sprinkler Black Red 2Pcs

• [Material] - Made of PVC material, acid and alkali resistant, corrosion resistant, never rust..
• [Feature] - The valve ensure the smooth flow of water and reduce water flow resistance..
• [Installation] Threaded on both ends, G female thread, easy and quick connections..
• [Applicaitions] - Widely used in irrigation, swimming pool, commercial plumbing, aquariums, reef tank, civil construction and other industries..

DERNORD 1/2\ Stainless Mini Ball Valve Female x Male NPT Thread with Stainless Steel Handle Pack of 2

• 0.5 Inch NPT Female&Male threads for connecting to male threaded pipe fittings.
• SUS316 body and ball for extra strength and corrosion resistance.
• Inline valve for connecting two pipes going in the same direction with Double-seal system.
• Heavy duty stainless handles to increase service life, fast 1/4 turn open or closed operation.
• Standard port flow for smaller valve size, each valve individually tested for maximum safety about Water, Oil, and Gas(no freezing).

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• 1-1/2’’ - Meets ASTM and ANSI standards.
• Maximum pressure rating of 150 psi at 73°F.
• Santoprene seats and stem packing reduce the risk of leakage.
• NPT female threaded for connecting to male threaded pipe fittings.

SHYOKO 1-1/2 Inline PVC Ball Valve Compact T-Handle Water Shut-Off Valves Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• PVC MATERIAL - PVC for corrosion resistance, high strength, and less weight than fittings made from metal, saving cost and accelerating the project....
• THREAD & 150 WOG - Female threaded for connecting to male threaded pipe fittings. 150WOG working pressure, suitable for irrigation and water supply..
• SAFETY - T handle for manual on/off control, easy operation.
• Santoprene seats and stem packing reduce the risk of leakage..
• ASTM - 1-1/2’’ ball valve, suitable for indoor and outdoor use like with cess-pipe, landscape and irrigation, pool, cold water, venting, waste....
• DURABLE - Each valve individually tested for maximum safety blow-out proof stem, ageing resistant and long service life..

SHMONO Inline PVC Ball Valve 1-1/2 inch Compact Single Handle Water Shut-Off Valves Female Thread x Female Thread [Available 1/2 ,3/4 ,1 ,1.25 ,2 ]

• Maximum pressure rating of 150 psi at 73°F.
• NPT female threaded for connecting to male threaded pipe fittings.
• 1-1/2’’ - Meets ASTM and ANSI standards.

Minimprover 2 Pack Brass 1/2 Inch FIP x 3/8 Inch OD Compression Quarter Turn Straight Water Angle Stop Valve Shut Off

• ★ Material: Brass. Which make it much more healthy for human. Certified to contain less than 0.25% lead..
• ★ Size: 1/2" FIP (1/2"-14 NPT Pipe Female Threaded) x 3/8" inch OD compression fitting..
• ★ FINISH: Chrome-plated finish resists corrosion. Working temperatures of -40 to 250 F..
• ★ Shut-off angle stop valve for faucets and toilets. Brass ball mechanism provides easy for operation..
• ★ Package include: 2 PCS 1/2" FIP x 3/8" inch OD compression Valve. Comes with 1 year warranty..

Home Intuition Outdoor Foam Faucet Cover, 3 Pack

• Easy Installation from Outside of the Barrel, All you need is cut 1-1/4 inch hole. Detailed Instruction and 10 Ft Thread Tape Included..
• Heavy Duty 4.0 oz Solid Brass Bulkhead Fitting, Female 3/4" NPT Threaded on Both Ends, install spigot on either end. Heavy Duty 6.0 oz 3/4" No Kink Quarter Turn Solid Brass Ball Valve with Garden Hose Hook Up.
• Bulkhead fitting need 1-1/4 inch diameter hole to install. Fit up to 1/2 inch thickness wall(Works great for 55 gallon used plastic drum barrels on craigslist, these barrels usually have wall thickness of 0.1-0.2 inch). Large 10mm Flow Opening, Great Flow Rate at Approx. 15 Second/Gallon or 4GPM, Tested with 2 ft Water..
• ATTENTION: REVERSE THREADED FITTING NUT, Turn CLOCKWISE to LOOSEN. Contain less than 0.25% lead, Lead Free Compliant. For more info about lead free compliant, please visit epa.gov. Compare Design, Material, Quality and Choose RAINPAL..
• Freeze Proof, Life Time Warranty against leak, crack or break..

3/8” High Pressure Ball Valve for Pressure Washer Gun, Plated Brass Power Washer Shut Off Valve DN10, 3000 PSI (3/8" Female BSP)

• ...lease feel free to contact us if you have questions during use. We will give you a satisfactory answer within 12 hours. Customer satisfaction is our tireless pursuit..
• 【Convenience and Safety】Ball valve for pressure washer gun is made of lightweight material, 3/8" Female BSP Inlet x 3/8" Female BSP Outlet with round frame. DN10 ball valve unique design can withstand high Pressure can be used for pressure washer gun, foam cannons and power washer..
• 【Solid Structure】The power washer shut off valve is made of high quality plated brass for compactness, ruggedness, and enhanced rust and corrosion resistance for long-term worry-free use. The high pressure ball valve can reach a maximum working pressure of 3000 PSI and a maximum working temperature of 176 degrees Fahrenheit..
• 【Leakproof Performance】Power wash ball valve with excellent PTFE (Polytetrafluoroethylene) seals provide perfect leakage protection and improves performance through high heat and chemicals. No need to worry about leaks occurring, ball valve dn10 will definitely save your time and money..

MTM Hydro Ball Valve for Pressure Washer Gun, High Pressure Power Washer Shut Off Valve Stainless Steel 3/8” Female NPT 5000 PSI

• PRESSURE WASHING BALL VALVE - Premium 3/8” Stainless Steel Ball Valve for pressure washer guns. 5000 PSI Max Pressure rating. Max Temp 250 degrees Fahrenheit..
• STAINLESS STEEL - Ball valve pressure washer made from stainless steel, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
• EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
• HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
• LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female NPT Inlet x 3/8" Female NPT Outlet..

Monster&Master Brass Angle Stop Valve Shut Off Quarter Turn Water Sink Bathroom Toilet Kitchen Shower Plumbing MM-FV-002×5 5 Pack ?

• Long-term flexibility: Based on the universal valve system, you can change the faucet style without replacing any water pipes in the future..
• Ideal for residential and commercial applications. It is suitable for hot and cold-water supply with a water temperature of 40-165 degrees Fahrenheit..
• It should be connected to the power of a faucet, toilet, water dispenser or dishwasher during installation..
• Size: With a 1/2 inch female threaded and 3/8 inch OD compression fitting..
• Contractor 5 pack. 1 / 4-turn ball valve style, solid lead free brass, durable and easy on/off operation..