Top Fault tolerant Printing Reviews

AEDIKO 4pcs Relay Module DC 5V Relay Switch 1 Channel Relay Board with Optocoupler Isolation Support High or Low Level Trigger

  • Fault-Tolerant Design: Fault Tolerant Design, Even if the Control Line is Broken, the Relay will not Operate.
  • All Interfaces of Relay can be Wired Out Through the Terminals Directly,Normally Open and Normally Closed.
  • Optocoupler Isolation:1 Channel Relay Board use Optocoupler Isolation that has Strong Driving Ability and Stable Performance ,The Isolation Circuit Prevent Damages to I / O Port by Relay Switch Current.
  • Jumper Design: The Relay Module has a Jumper That You Can Set Rather the Unit State Changes with High or Low Signal. Has Screw Terminals for Relay (NC,C,NO) and for Input.
  • Wide Application: DC 5V Relay Module Works Well with ARM /PIC /AVR /MCU/Raspberry/CNC Machine/ PS4 etc..
Check Stock

Power ONE LONGLIFE Power C Battery | Long Performing Alkaline Batteries Made in Germany with Up to 10 Years Shelf Life - Pack of 4

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Made in the USA to SureFire specifications.
Check Stock

eSUN PLA PRO (PLA+) 3D Printer Filament, Dimensional Accuracy +/- 0.03mm, 1kg Spool, 1.75mm, Cool White

  • 【More easier & Smoothly & Odorless】JAYO is a sub-brand of SUNLU. JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry f....
Check Stock

SureFire 12 Pack Carded 123A Lithium Batteries

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Made in the USA to SureFire specifications.
Check Stock

SureFire 72 Pack 123A Lithium Batteries, Red

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Made in the USA to SureFire specifications.
Check Stock

SureFire 6 Pack 123A Lithium Batteries

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Made in the USA to SureFire specifications.
Check Stock

SureFire SF2-CB 123A Lithium 3V Batteries (2-Pack)

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Made in the USA to SureFire specifications.
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm Twinkle PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM 3D Printers, PLA Twinkle Black

  • 【More easier & Smoothly & Odorless】JAYO is a sub-brand of SUNLU. JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【Vacuum Packaging】JAYO 3D printer filaments are all vacuum sealed and come with a desiccant pack to keep the product fresh, dry and dust free for the best 3D printing results..
  • 【Professional after-sales service】For questions about product quality or 3D printing, you can contact us at any time. 24*7 days professional after-sales service team offer you worry f....
Check Stock

SUNLU PETG-G 3D Printer Filament 1.75mm 1 kg Spool, Better Flow of SUNLU no plugging Premium PETG-G Filament 1.75 +/- 0.02 mm for 3D Printing,Black

  • ...erance】: 1.75mm PETG-G 3D filament(Tolerance Level : ± 0.02mm). Full 1KG 3d printer filament reel, perfect roundness and very tight diameter tolerance , approximately 325 m of filament on each spool ease of use, minimal warping, no clogging, no bubbles. Increase your 3d printing objects delicacy..
  • 【Rigid, Tough, High Performance 3D Printing Material】3d printer filament PETG-G 1.75 is a rigid, tough, high performance material, offering excellent clarity, light transmission and high gloss. It's about as stiff as PLA. and is highly resistant to temperatures at above 60°C(140°F)..
  • 【Recommended Printing Temp/Nozzle Temperature】: PETG-G 3d printer filament suggest printing temperature is 215-230°C(419-446°F).Bed/Platform temperature of 60-80°C(140-176°F)..
  • 【High Compatiblity &100% Enviromental Material】: Works and harmonizes perfectly with all common 1.75mm FDM 3D printers, thanks to the high quality standards in terms of manufacturing accuracy and the small tolerance in diameter of +/- 0.01mm.Environmental protection, made from starch raw materials derived from renewable plant resources..
Check Stock

SureFire SF12-BB 123A CR123 3-Volt Lithium Batteries - 36 Pack

  • High-performance batteries, optimized for high-drain use in flashlights.
  • Built-in heat and fault (short-circuit) protection.
  • Primary Single Use Batteries - Not Rechargeable.
  • Made in the USA to SureFire specifications.
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C – 220°C, Bed 55°C – 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever....
Check Stock

Creality Ender Series- PLA 3D Printer Filament 1.75mm, Upgrade Stronger Toughness Printing Consumables, Dimensional Accuracy ± 0.03 mm, 1 KG (2.2 LBS)

  • 【Elongation at Break is Increased by 10%】Creality Ender Series Upgrade Filament, The Imported raw material upgrades with stronger toughness. It is not easy to break, meeting your demands for printing projects of functional parts with higher toughness.
  • 【Consistent Filament Diameter with Small Tolerance】The diameter tolerance of the filament is an important index. The tolerance of 1.75mm Ender- PLA filament is controlled within ±0.03mm, which makes the feeding more smooth and ensures continuous printing. Recommended Extrusion/Nozzle Temperature 195°C - 220°C, Bed 55°C - 60°C for better printing results.
  • 【High Purity Raw Material with Green and Degradable】Extracted from corn grains, raw materials are friendly and healthy. The filament has no irritating smell and can be naturally degraded.
  • 【Smooth Feeding and No Plug】The customized proportioning scheme, Ender- PLA filament has better tensile strength and ductility. Smoother fluidity makes the printing easier without plugging, which realizes the exquisite results. The upgrade raw material makes the model support easier to add and remove without warping.
  • 【Creality Official Brand Worry-free After-sales】Good vacuum packing ensures the filament is dry, easy to store, and use. Whenever or ....
Check Stock

JAYO 3D Printer PLA Filament, 1.75mm PLA Filament Dimensional Accuracy +/- 0.02mm, 1KG Spool 3D Printing Material fit for FDM Printers, PLA Candy Red

  • 【More easier & Smoothly & Odorless】JAYO 3D FDM PLA Filament is easier to print, odorless and prints well. JAYO PLA Filament makes 3d printing smoother..
  • 【High Precision +/- 0.02mm Tolerance】 JAYO PLA Filaments have high precision (Tolerance Level : ± 0.02mm). The full 1kg 3D printer filament has perfect roundness and very tight diameter tolerance. They can increase your 3D printing delicacy..
  • 【High Quality Material & Parameter Settings】JAYO PLA printing filament has the characteristics of anti-warping, no bubbles, no paper jam and no wire drawing. Recommended printing temperature 190-230°C (392-446°F), hot bed temperature 40-60°C (104-140°F)..
  • 【High Compatibility】JAYO 3D PLA filaments are highly compatible with FDM 3D printer materials. They are compatible with most printers FDM 3D printers, such as SUNLU T3, S8 , S8 PRO, S9 PLUS 3D printers..
  • 【12 Months Warranty & Friendly After-Sales Service】 N.W 1KG PLA, welcome guide, 12 months warranty, and friendly after-sales service. Let’s buy it now!.
Check Stock