Top Fastener bolt Reviews

(10 Sets) 1/4-20x2\ Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

• A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
• As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
• Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
• Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 3/8" | Length: 4" | Thread Type: 16 tpi Coarse Thread (Standard).
• Package includes four each of bolts, hex nuts , Flat & Lock washers.

(10 Sets) 1/4-20x3' Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

• A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
• As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
• Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
• Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 3" | Thread Type: 20 tpi Coarse Thread (Standard).
• Package includes ten each of bolts, hex nuts , Flat & Lock washers.

(10 Sets) 1/4-20x1-1/2" Stainless Steel Hex Head Screws Bolts, Nuts, Flat & Lock Washers, 18-8 (304) S/S, Fully Threaded by Bolt Fullerkreg

• A Hexagon Bolt is a threaded fastener with a hexagonal head shape, and are designed to be installed using a spanner. Hexagon bolts are favoured for their robust shape, which makes them suitable for more heavy-duty fastening applications. Hexagon bolts are also generally available in larger sizes than alternative fasteners..
• As their name suggests, Full Thread Hexagon Bolts are fully threaded. This type of bolt is required when the shaft of a fastener is being inserted completely into a threaded hole. Fully Threaded Bolts are often used to securely fasten two threaded sections together..
• Made from 18-8 stainless steel, FullerkregⓇ brand screws have good chemical resistance and may be mildly magnetic. Length is measured from under the head..
• Screws that meet ASME specifications comply with these dimensional standards.DIMENSIONS: Diameter: 1/4" | Length: 1-1/2" | Thread Type: 20 tpi Coarse Thread (Standard).
• Package includes ten each of bolts, hex nuts , Flat & Lock washers.

Innovative Components AH-COM Thread Detective / Thread Identifier Inch. and Metric Combo Set with Ruler Attached

• Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
• All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
• Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
• Eliminates costly and time consuming repairs..
• Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..

Innovative Components AH-COM Thread Detective/Thread Identifier Inch. and Metric Combo Set with Ruler Attached Medium/Standard size range

• Set includes both Inch and Metric identifiers. Thread sizes are permanently laser etched on each gauge..
• All sizes are steel with a clear zinc finish and each gauge identifies both bolts and nuts..
• Takes the guess work out of thread size and pitch on nuts, bolts , screws, threaded holes and many other threaded items..
• Eliminates costly and time consuming repairs..
• Great for identifying and sorting nuts and bolts in fastener cribs, fastener bins at home or at your facility..

ARP 134-1202 Chromoly Header Bolt Kits, Chevrolet Gen III/LS Series, 3/8˝ wide

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

• Constructed of heavy gauge steel and solid steel bolt fastener.
• Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
• Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
• Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.

GEARWRENCH Open End Ratcheting Metric Wrench Set 12 Pc., 12 Point - 85597

• Combines the speed of ratcheting with the access of the open end wrench..
• Open end ratcheting mechanism allows you to turn nuts and bolts without taking the wrench off the fastener..
• Ratcheting box-end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end..

Sunex 2641, 1/2 Inch Drive Deep Impact Socket Set, 19-Piece, SAE, 3/8' - 1-1/2', Cr-Mo Alloy Steel, Radius Corner Design, Dual Size Markings, Heavy Duty Storage Case

• DEEP: Access to parts that need to reach further into the socket, such as bolted joints and clamp bolts.
• CR-MO STEEL: Provides the strength and flexibility to handle high torque impact tools.
• RADIUS CORNER DESIGN: Reduces wear and increases torque on fasteners by placing force on fastener walls rather than fastener corners.
• CHAMFERED OPENING: Quickly aligns fastener to socket.
• DUAL SIZE MARKINGS: Laser etched and roll stamped markings to ensure permanent socket identification.
• HEAVY DUTY STORAGE CASE: Convenient impact socket transport and storage.
• MEETS ANSI STANDARDS: All sockets are rigorously tested, ensuring peak performance and durability.

Channellock 422 1-1/2-Inch Jaw Capacity 9-1/2-Inch V-Jaw Tongue and Groove Plier , Blue

• The product is manufactured United States.
• V-Jaw gives more points of contact on objects.
• Patented undercut tongue-and-groove design.
• Patented Permalock fastener eliminates nut & bolt failure.
• 100% guaranteed against breakage and failure.

GEARWRENCH 8 Pc. 12 Point Open End Ratcheting Combination SAE Wrench Set - 85599

• Combines the speed of ratcheting with the access of the open end wrench.
• The open end ratcheting mechanism allows you to turn nuts and bolts without taking the wrench of the fastener.
• Ratcheting box-end needs as little as 5 degrees to move fastener vs. 30 degrees for standard box end wrenches.

3M Dual Lock Reclosable Fastener TB3561/TB3562, Clear, 1 in x 10 ft, Type 400/170

• Trial bag version (1 in. x 10 ft.) of 3M Dual Lock Reclosable Fastener SJ3561 and 3M Dual Lock Reclosable Fastener SJ3562.
• Great for small jobs, prototyping and design evaluation.
• Clear, interlocking mushroom-shaped heads provide strong, reliable and durable fastening that can be opened and closed multiple times.
• Clear, acrylic, tape bonds well to a variety of substrates including metals, glass and plastics such as acrylics, polycarbonate and ABS.
• Strong fastener secures with an audible snap, verifying closure.
• An alternative to screws and bolts, this hidden fastener provides a snug fit and smooth aesthetic appearance.

BGMVFK Black License Plate Screws- Rustproof Stainless Steel Car Tag Screws, M6X16mm (1/4\X5/8\) Fasteners Hardware- Phillips Machine Bolts Nuts Caps for Mounting Front or Rear Frame

• Stainless Steel License Plate Screws: Black Car Tag frame Screws are made from Premium 100% stainless steel which is one of the highest forms of corrosion resistant steel, Rustproof fasteners are great to have around for use in Wood and wet environments. Say goodbye to your old rusty license plate fastener with this durable, rust resistant license plate hardware.
• Universal 6mm Screws Nuts Assortmant: 1/4" X 5/8" bolt (M6*16mm Standard length) with Phillips head bolts will fit most Car/Truck/Trailer license plate holes. Metric M6 machine bolts with black fastener nuts can fix the car tag plate and frame well.
• License Plate Mounting Hardware: The license plate screw bulk kit contains-bolts, nuts and black screw caps. Oxidation blackening process, the black appearance will not fade or fall off. Black stainless steel screws are more corrosion resistant than galvanized screws, Screws Caps Eliminates the visibility of the fastener, anti theft, keep the license plate clean and tidy.
• Rattle Proof License Plate: The black anti-rattle license plate pads can be pasted on the back of your license plates, which can prevent the metal license plate from directly contacting the car body and reduce noise. Black metal keychain with wristband can find keys are easy at wor....