Top Fast Cutting Reviews

DEWALT 20V MAX* XR Angle Grinder Kit 4.5-Inch Paddle Switch Small Angle Grinder and 1-1/2-Inch Die Grinder 2-Tool DCK203P1

✅ Premium and Value: This 20-pack 4-1/2 x 7/8-inch metal/stainless steel cut-off wheel set is specially formulated for fast cutting in metals and....
✅ Safe but Durable Material: Bonded with corundum and white alundum grain and reinforced by double fiberglass mesh, these cutting discs perform much....
✅ Precise and Efficient Cutting: 3/64-inch ultra thin design for fast burr free cutting with minimal material loss, make cutting project more....
✅ Great Performance: Perfectly compatible with all 4-1/2 inch angle grinders with 7/8-inch arbor, operating up to 13,000 RPM and 80M/S..
✅ Versatile Applications: Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron,....

Check Stock

Milwaukee Electric Tool 49-56-0173 Ice Hardened Bi-Metal Hole Saw, 3\ Die, 8% Cobalt

Ideal for cutting with wide, angled, and offset slots.
Ice hardened for up to 50-Percent longer life than the competition.
Matrix II bi-metal teeth for greater durability.
Radiuses tooth back reduces stress on teeth.
Deeper gullets for fast chip removal and functional slot geometry provides easy plug removal.
Radiused tooth back reduces stress on teeth.

Check Stock

Anbull Carbide Hole Saws Hole Cutter Set 9 Piece Stainless Steel, Includes 6-Piece Hole Cutter 2-Piece Pilot Drill Bits 1-Piece L-Wrench and Molded Plastic Case, Long Life Hole Saw Kit for Hard Metal

High Quality: Adopt tungsten carbide material, unique cutting-edge grinding technology, sharp and wear-resistant, not easy to break, drilling high efficiency and fast chip removal, extremely long service life..
Fast Cutting & Chip Removal: Use high-strength, high-sharp tungsten carbide blades,and anti-vibration gear design, fast and durable. Arc-shaped chip pocket design, conducive to the smooth discharge of iron filings, reducing chip jamming, and conducive to chip holding at the limit cutting depth..
Precise Cutting: Stepped pilot drill bit design, precise center positioning, providing fast and precise incision, and with step cutting function, effectively decompose the cutting resistance of the centering drill, reduce the impact force at the moment of drilling through and avoid chipping of the cutting edge.
And Pilot Drill Spring Design, control the displacement of the cutting edge, avoid damaging the drill bit by sudden cutting..
Scope of Application: Used with power drill, magnetic drills, benchtop drills to quickly and accurately cut stainless steel, sheet metal, cast iron, mild steel, aluminum and FRP less than 5 ....

Check Stock

SALI 50 Pack Cut Off Wheel 4 1/2 Inch Cutting Wheels 4-1/2 x 3/64 x 7/8 for Metal & Stainless Steel Angle Grinder Cutting Wheel,Cutting Discs with Aggressive Cutting

【Size】4-1/2-Inch x .047-Inch x 7/8-Inch.
【PERFORMANCE】This is for a pack of 50 pieces of our cutting wheels Thin 0.045" cutting wheel design for fast burr free cutting. Perfectly compatible with all 4-1/2 angle grinders with 7/8-inch arbor, operating up to 13,300 RPM and 80M/S.
【Advantage】Thin .045-Inch wheel design for fast burr free cutting Proprietary aluminum oxide grain combination for aggressive cutting action.
【MATERIAL】Proprietary aluminum oxide grain for long life and fast cutting.double fiberglass mesh reinforced for further safety and durability.
【SAFETY TIPS】Please use all necessary protective gear when you use these cutting discs.If there is any problem with the product, please contact us to help you solve the after-sales problem..

Check Stock

ORIXTREME 14 Inch Diamond Concrete Saw Blade Segmented General Purpose Blade Dry/Wet Cutting Concrete Masonry Brick Block ,1 -20mm Arbor

【SPECIFICATION】: 14"x.125"x.590"/15mm. Segment height 15mm. Arbor 1”-20mm bushing.
【LONG &FAST CUTTING】：The diamond saw blade use high grade diamond and a premium bond matrix deliver long lasting performance. Fast cutting speed, durable and long cutting life..
【SMOOTH & CLEAN CUTTING】:The slots of diamond saw blade can improve air flow, cutting dust, dissipate heat and remove slurry, maintain the cutting performance.
【CUTTING MATERIALS】:This segmented diamond blades are produced specifically excellent for wet and dry cutting concrete, brick, block, stone, masonry materials. Not recommend to cutting asphalt and green concrete.
【Application】: Designed for construction worker, maintenance worker, brick layers and home DIY. Operated on Circular Saw, Masonry Saw, Table Saw, Handheld Electric Saw, Road Cutting Machine..

Check Stock

EZARC Carbide Hole Cutter Heavy Duty for Stainless Steel, 3/4 Inch 19mm

【 Extremely Long Life 】Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
【 Fast & Precise Cuts 】The carbide technology and optimized tooth geometry make EZARC hole saws provide superior lifetime and fast cutting in the most demanding applications..
【 Applications 】Provide fast and precise cuts into 1/5-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
【 Perfect Cutting Surface 】This hole cutter can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
【 Dimension 】Cutting diameter : 3/4-inch(19mm), cutting depth : 1/5-inch(5mm), chunk size: 2/5-inch(10mm)..

Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..

Check Stock

Freud D0760X Diablo Ultra Finish Saw Blade ATB 7-1/4-Inch by 60t 5/8-Inch Arbor

Ultra thin kerf for fast, easy cutting and minimum waste.
Anti vibration Technology reduces noise and extends cutting life and Laser Cut steel blade body for smoother cuts and flatness.
Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life.
Features Freud's Exclusive TiCo Hi-Density Carbide designed specifically for crosscutting applications.

Check Stock

EZARC Cut Off Wheel 25 Pack, 4.5\ x .045\ x 7/8\ Cutting Wheel, Metal & Stainless Steel Cutting Disc for Angle Grinder

【Long Lasting Discs】Our metal cutting disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
【Great Performance】The ultra-thin design of 0.45inch thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
【Versatile Applications】Tough abrasive cutting discs are ideal for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and all other ferrous metals..
【Perfect Size】The cutting wheels are suitable for most angle grinders-compatible with all 4.5" angle grinders and 7/8" arbor, operating speeds up to 13,300 RPM and 80M/S..
【Reliable Safety】EZARC metal cutting discs comply with international standards and safety requirements such as EN 12413, ASM07. Please wear suitable protective equipment during use 4.5 cutting wheels and do not exceed the specified maximum speed..

Check Stock

EZARC Cut Off Wheels 25 Pack, 3” x 1/16” x 3/8” Cutting Wheel, Metal & Stainless Steel Cutting Disc for Die Grinder

【Long Lasting Discs】Our metal cutting disc is made of iridium-plated white corundum, so our cut-off wheel has 2 times the cutting life of a normal cutting wheel. These cutting discs are made by a special process of alumina abrasive to ensure extra toughness, sharpness, and durability..
【Great Performance】The ultra-thin design of 1/16" thickness cutting off wheels provides fast, precise, and clean cutting performance with minimal burrs and material waste..
【Versatile Applications】Tough abrasive cutting discs are ideal for super-fast, clean cutting in carbon steel, stainless steel, iron, copper, and all other ferrous metals..
【Perfect Size】The cutting wheels are suitable for most die grinders-compatible with all 3" die grinders and 3/8" arbor, operating speeds up to 25,000 RPM and 80M/S..
【Reliable Safety】 EZARC metal cutting discs comply with international standards and safety requirements such as EN 12413, ASM07. Please wear suitable protective equipment during the use of 3-inch cutting wheels and do not exceed the specified maximum speed..

Check Stock

White Bridal Bouquet Elegant Rhinestones Holding Flowers Artificial Bride Bouquet for Wedding Decor

Two flute carbide TCT tips for cleaner cutting and fast clearance of waste in all timber and timber based materials. Ensures faster clearance of waste and superior cutting performance.
Covers the three standard biscuit sizes of 0, 10 and 20 for joinery, furniture making and flush alignment of boards and countertops for accurate fast jointing.
The stacked arbor allows additional cutters to be fitted for additional configurations such as twin slots for thicker materials to increase joint strength.
Ultra durable premium carbide ensures maximum performance and cutter longevity. Ideal for hardwoods, softwoods and sheet materials including ply, MDF, particleboard and melamine..

Check Stock

Casaverde 2 Pcs/Lot 3-3/8 Inch Diamond Porcelain Saw Blades Tile Blade for Cutting Porcelain Tile…

SIZE：3-3/8"/ 85 mm, Arbor Size:7/8"-5/8", Quantity: 2 pcs..
Super thin turbo mesh rim diamond blade provide fast, precise, smooth and chip-free cutting experience for you..
Diamond blade for cutting granite marble porcelain tile.

Check Stock

10 Pack Panlen Cutting Wheel,4-1/2 inch Metal &Stainless Steel Cut-Off Disc,Thin Metal Cutting Disc for Angle Grinder by Panlen (10)

Premium and Value Materials - Panlen cutting discs are made of aluminum oxide grains that are durable. It also provides aggressive cutting action and longer service life..
Perfect Size - Outer diameter:4.5inch inside diameter:7/8 inch,045" quality thin, operating up 13,000 RPM and 80M/S. optimized for 4.5”angle grinders..
Multiple Applications - Tough abrasive cutting discs are perfect for super-fast, clean cutting in carbon steel, stainless steel, pipe, iron, copper and all other ferrous metals..
Precise and Efficient Cutting - Design for fast burr free cutting with minimal material loss, make cutting project more precise and efficient..

Check Stock