Top Fan Clutches Reviews

AISIN FCT-002 Engine Cooling Fan Clutch

  • Provide fan speed control in proportion to engine revolutions per minute.
  • Engineered to exact original equipment specifications.
  • Provide optimal cooling performance without sacrificing engine efficiency.
  • Fan clutches are always original equipment matched.
Check Stock

BILITOOLS Fan Clutch Removal Tool Kit, Fan Clutch Wrench Set 22 36 40 47 51 MM with Pulley Holder

  • Fan clutch service tool set includes 5x Fan clutch wrenches - 22mm, 36mm, 40mm, 47mm, 51mm.
  • Special fan clutch wrench tool kit is designed to remove and install fan clutches when repairing or replacing the water pump, timing chain or the fan clutch..
  • The pulley holder with 4 pairs of replacement pins is designed to trap and hold bolt on pulleys by the mouting bolts. It is suitable for most vehicles and newer Chrysler engines with press on pulleys requiring sprcial pins to hold housing..
  • This fan clutch tool Kit is made from forged steel for superior strength, black finish further improves corrosion resistance for lasting durability..
  • The fan clutch wrenches are compatible with Ford Trucks (2.8L, 2.9L, 3.0L, 4.0L, 1.9L engines), Dodge Trucks (3.9L, 5.2L, 5.9L, 8.0L, V10 engines), GM Trucks (4.3L, 5.0L, 5.7L engines), ect..
Check Stock

Powerbuilt Fan Clutch Wrench Master Kit, 10 Piece, Remove, Wrenches Loosen Fan Clutches, Ford, Chrysler, GM, Imports, Storage Case - 648651

  • Made to be the most reliable tools in the market today.
  • Tool set for removing threaded-on viscous fan clutches.
  • Includes smaller spanner-type wrenches for engaging the hex nut on the fan clutch.
Check Stock

GMB 115-2320 OE Replacement Water Pump with Gasket

  • 100% factory tested for leakage and dimensional precision.
  • Designed to match OE coolant flow rate and pressure.
  • Precision-ground shaft and hub accept OE fan clutches perfectly.
  • All required hardware included for easy installation.
Check Stock

GM Genuine Parts 15-40133 Engine Cooling Fan Clutch

  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy.
  • GM-recommended replacement part for your GM vehicle’s original factory component.
  • Offering the quality, reliability, and durability of GM OE.
  • Manufactured to GM OE specification for fit, form, and function.
Check Stock

GM Genuine Parts 15-4694 Engine Cooling Fan Clutch

  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy.
  • GM-recommended replacement part for your GM vehicle’s original factory component.
  • Offering the quality, reliability, and durability of GM OE.
  • Manufactured to GM OE specification for fit, form, and function.
Check Stock

ABN Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit with Water Pump Pulley Holder 3-Piece Fan Clutch Set

  • REMOVE & REINSTALL AUTOMOTIVE FAN CLUTCHES: The ABN 32mm & 36mm Fan Clutch Wrench Kit with Fan Pulley Holding Tool removes lock nuts on temperature-dependent thermo-viscous fans.
  • The holder bar keeps the water pump pulley in place while loosening the radiator fan.
  • FITS YOUR VEHICLE: Made to be compatible with BMW engine models M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32, S54.
  • Also compatible with some Ford, GM, and Chevy models.
  • Bar has (3) 13 mm diameter holes and (1) 24x12 mm hole plus (1) 33x11 mm and (1) 38x25 mm half-circle grooves.
  • BUILT TO LAST: Constructed from 0.2-inch (5 mm) thick vanadium steel for maximum strength and longevity.
  • 12.5-inch (31.8 cm) long clutch fan removal tool handles for less user fatigue.
  • EASY TO USE: Attach the pulley holder bar with your bolts inserted through the holes, lock into place on water pump face, place wrench on fan clutch nut, and loosen the fan clutch nut by turning clockwise using 32 mm or 36 mm (both included) spanner to undo nut.
  • If the hole sizes on the tool are smaller than the bolts holding the pulley wheel to the wate....
Check Stock

GM Genuine Parts 15-40107 Engine Cooling Fan Clutch,Silver

  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy.
  • Some GM Genuine Parts may have formerly appeared as ACDelco GM Original Equipment (OE).
  • GM Engineers design and validate OE parts specifically for your Chevrolet, Buick, GMC, or Cadillac vehicle.
  • Original equipment parts are designed to work with your GM vehicle safety systems -- aftermarket replacement parts may not meet the same OE safety regulations, depending on the part type.
  • GM regularly updates production and service part designs to integrate new materials and technologies.
Check Stock

Powerbuilt Fan Clutch Wrench Kit, 4 Piece, Remove Fan Clutches, Ford, Chrysler, Jeep, Some Import Vehicles, Storage Case - 648746

  • Removes threaded-on viscous fan clutches on Ford, Chrysler, Jeep and some import vehicles.
  • Durable storage case with step-by-step instructions.
  • Precision-built to meet or exceed ANSI standards.
  • Strong and dependable enough to last a lifetime.
  • Kit includes usage instruction with photos.
Check Stock

Galvanized Pillow Block Hanger with Pillow Block

Check Stock

4L60E Shift Kit & HD Valve Body Separator Plate Combo 2001-2006

  • Includes: Alto Friction Clutches, Steels, 3-4 Power Pack, Sealing Rings, Metal Clad Seals, Gaskets, Orings, Filter, Band, bushing kit, Heavy Duty Sunshell, Superior Valve Body Shit Kit, & 29 Element Sprag.
  • Alto Products created extra capacity clutches known as the power pack. The powerpack adds more clutches into same factory drum, by reducing the clutch thickness, which increases your clutch apply area, giving you and increased surface area for increased clutch holding, increased surface area for increased heat absorption, and increased surface area for shorter lock-up time-decreasing “slippage’.
  • High quality Clutches Made in the USA by Alto Products, and Premium Transtec or Precision Gasket Kit.
  • Transparts Warehouse, Inc. Quality parts, Informative Sales team, Value you can trust..
  • Our transmission rebuild kits are of the highest quality and meet all standards set by professional installers.
Check Stock

3PCS Men's Brass Collar Bar Tie Necktie Pins Clasp Shirt Collar Stay Bar Cravat Pin Stud Bar Clips Brooch Gold Silver Black (Column Head)

  • Keep your tie in order with our dependable tie tack clutches with Chain and Bar...
  • Assortment included 1 Gold Tie Tack and 1 Silver Tie Tack.
  • Keep your tie in order with our dependable tie tack replacement clutches..
  • Each clutch includes a chain that threads through your button hole to keep your tie from blowing away..
  • Mix and match with our Gold Plated and Silver Color Tie Tack Clutches. This set of two clutches is perfect to have on hand for any occassion..
Check Stock

Motorhot Dual Engine Radiator Cooling Fan Assembly fit for VW Volkswagen Jetta Passat Golf Rabbit Beetle

  • Suitablen for 2012-2015 VW Volkswagen Beetle.
  • Interchange part number:VW3120100,621490,1K0121207BB9B9.
  • Quality tested to ensure trouble-free installation and performance.
  • Durably constructed metal casting and clutch plate, rubber-coated harness and plastic connector for long-lasting use.
  • Quiets noisy cooling fans with stuck fan clutches, restores fuel economy.
Check Stock