Top Fan Clutch Pulley Tool Reviews

Four Seasons 36895 Reversible Fan Kit

Mercedes-Benz fan clutch holding wrench holds the water pump pulley to allow release of the fan.
Mercedes-Benz fan clutch wrench removes the thermo-viscous radiator fans found on Mercedes-Benz and Ford vehicles.
BMW Fan clutch holding wrench holds the water pump pulley in place while loosening the radiator fan.
BMW fan clutch wrench is used to remove and install the thermo-viscous fan on BMWs and Fords.
Universal fan belt adjustment wrench services Mercedes-Benz Nissan Quest and Mercury Villager radiator fans and pulley belts.

Check Stock

EASYUSE 2-Piece Fan Clutch Wrench Set,Removal Tool for BMW, Mercedes, Ford and Other Engine Models,Fan Clutch Nut Wrench & Water Pump Holder

[DURABILITY]:Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
[COMPATIBILITY]:Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
[INCLUED]:1 pc Wrench, 1pc Fan Clutch Holder.
[DESIGN CONSIDERATIONS]: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
[EASY TO USE]: Easily remove the lock nuts on temperature dependent viscosity drive fans.
easily hold the water pump pulley in place while loosening the radiator fan..

Check Stock

OMT Fan Clutch Removal Tool Kit, 32mm and 36mm Fan Clutch Wrench Set Compatible with BMW Ford Mercedes-Benz More, 2pc Water Pump Holder Tool 15' Water Pump Pulley Holder for German Engine Maintenance

CUSTOM PURPOSE SET: This 2 piece fan clutch removal tool kit includes an extra-long 32mm & 36mm fan clutch wrench and a water pump holder tool to specifically reach and manipulate the fan clutch nuts and water pumps used in many German engines.
HIGHLY VERSATITLE: This fan clutch nut wrench set precisely fits a wide range of engines, including the M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32 and more.
GALVANIZED CARBON STEEL: This fan clutch wrench set is made from heavy duty structural steel for reliable strength along the entire shaft.
each one is further galvanized to resist wear, tear, and corrosion under even punishing use.
EASE OF USE: The wrench and water pump pulley holder tool are specially lengthened to provide extra leverage with sure grip when working on fan clutch nuts on metric thermo-viscous fans, letting you service your timing or water pump quickly.
SERVICE & SUPPORT: OMT backs this water pump removal tool with a 1 year strong warranty and its usual friendly 24/7 customer service, ensuring that you'll enjoy easier checks, maintenance, and repair on your import cars for years to come.

Check Stock

43300 Pneumatic Fan Clutch Wrench Set Removal Tool Kit Gear Assisted Positioning Tool for Ford GM Chrysler by Lucky Seven

43300 Pneumatic Fan Clutch Wrench includes 7 driving wrenches that fit Ford, GM, Chrysler & Jeep. Set now includes 7/8", 32mm, 36mm, 40mm thin and new 47mm size to fit Ford 6. 0L and 6. 4L Power stroke diesel pickup. 1-7/8"and 2" are still included in the set. 1-1/2" 41mm and 42mm are still available individually..
43300 Pneumatic Fan Clutch Wrench Set ，Package included:1 * 43370 handle+1 *43380 32mm driving wrench+1 *43390 36mm driving wrench+1 *43440 40mm driving wrench+1 *43530 47mm driving wrench+1 *43430 7/8" driving wrench+1 *43410 1-7/8" driving wrench+1 *43420 2" driving wrench.
43300 Pneumatic Fan Clutch Wrench Kit,43300 pneumatic fan clutch,Fan clutch installer/remover set,Quickly removes and installs fan clutch when repairing the water pump or fan clutch.Faster and easier than conventional fan clutch wrenches. No holding wrench is necessary..
43300 Pneumatic Fan Clutch Wrench AKA Fan clutch removal tool kit,43300 pneumatic fan clutch wrench set,for 43300 lisle,43300 wrench set,43300 fan clutch tool,43300 pneumatic fan clutch,for lisle 43300 pneumatic fan clutch wrench set,....

Check Stock

Yemtuls Radiator Pressure Leakage Tester Tool Kit, Automotive Cooling System Water Tank Leak Test Detector Work with Air Compressor Pump

Fan clutch wrench is designed to easily remove lock nuts on the temperature dependent thermo-viscous fans.
This fan clutch removal tool kit allows user to hold the water pump pulley in place while loosening the radiator fan.
Size: 32mm (1.26"),Wrench is 15" long, Holder is 15.75" long. Specially lengthened to provide extra leverage with sure grip when working on hard-to-get-to fan clutch nuts, letting you service your timing or water pump quickly and easily.
Compatible for M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.
Constructed from high strength steel for durability and a long life.

Check Stock

ARES 15027- Cooling System Refill Kit - Easily Test for Leakage in Cooling System - Change Coolant Quickly - Works with Most Radiator and Coolant Bottlenecks

Easy to Use: Easily remove the lock nuts on temperature dependent viscosity drive fans.
easily hold the water pump pulley in place while loosening the radiator fan.
Compatible: Made for but not limited to the following engine models M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B3.
Heavy and Durable: Premium high strength steel for this 32mm Automotive Fan Clutch Nut Wrench.
If you need to remove the reverse threaded fan,this fan clutch wrench Worked great, made the job of replacing the radiator so much easier..
This 2-Piece Fan Clutch Wrench Set is a necessary option if you are going to remove your thermostat or water puimp. Cut my job in more than half the time without it. I recommend that anyone this job needs this tool and the combo set makes it a brainier.

Check Stock

Prokomon 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit for BMW E34 E39 E36 E46 E90

DESIGN CONSIDERATIONS: Our 32mm 2-piece Fan Clutch Wrench Set is designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan. This tool allows the user to easily hold the water pump pulley in place while loosening the radiator fan..
DURABILITY: Constructed from premium high strength steel, this fan clutch wrench set is built to last a lifetime, and the rubber grip helps to prevent hand fatigue during prolonged use..
COMPATIBILITY: The ARES Fan Clutch Wrench Set is compatible with BMW vehicles, including, but not limited to, the following applications: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, and S50B32..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an impact. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES 2-Piece Fan Clutch Wrench Set, simply contact customer service for troubleshooting help, parts, replacement, or refund..
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..

Check Stock

ZKTOOL 32mm&36mm Fan Clutch Nut Wrench Set Fit for BMW Ford GM, Chevrolet,Nut Water Hub Removal, Removing Holding Holder Clutch Tool,Water Pump Holder Removal Tool.

【WIDE APPLICATION】 This SCITOO 2pc Water Pump Tool Suitable for various engines: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S54, S50B30, S50B32..
【EASY TO USE】 SCITOO Fan Clutch Nut Wrench Water Pump Holder Tool are manufactured to the OE specification for exactly fitment to lock nuts on the thermo-Viscous fans and hold the water pump pulley in place while loosening the radiator fan. Direct replacement, which can work smoothly, can help you save a lot of money..
【QUALITY ASSURANCE】 Construct from high quality steel and have went through vehicle try-on testing to ensure the quality is qualified and durable, ensure long service life. Suitable for home use and professional mechanics..
【PACKAGE INCLUDED】 Come with 1pc Fan Clutch Wrench, 1pc Fan Clutch Holder, plug and play..
【IMPORTANT NOTE】 We provide 1 year warranty for you. When doing automotive maintenance always make sure all the tools are correctly used . Any question or problem, feel free to contact us..

Check Stock

GEARWRENCH Fan Clutch Service Set |Fan Nut Wrenches|Pully Holder|Blow Mold Case| - 41580D

Gearwrench's Fan Clutch Service Set covers most vehicles with bolt on pulleys.
Also covers newer Chrysler engines with press on pulleys requiring special pins to hold housing.
Features the patented universal PULLEY holder.
Fan nut wrenches included: 22mm, 36mm, 40mm, 50mm, & diesel.
Durable blow mold case for tool retention.

Check Stock

YHB 32mm & 36mm Fan Clutch Nut Wrench and Water Pump Holder Tool Kit Removal for BMW Fan Clutch Tool Removal kit (3pcs) - Fan Clutch Removal Tool 36mm and 32mm Fan Clutch Tool Kit

【Item name】 Fan Clutch Nut Wrench, Clutch Removal Tool Kit, Fan Clutch Wrench Set, Water Pump Holder Removal Tool Kit, designed to easily remove the lock nuts on a temperature dependent thermo-viscous fan..
【Compatible with】Fan Clutch Nut Wrench Compatible with BMW E34 E46 E90 E39 E36.
【Applications】32mm Clutch Removal Tool Kit Made to be compatible with BMW engine models M4 M10 M20 M30 M40 M44 M50 M52 M52TU M54 M56 M60 M70 M73 S14 S38 S54 S50B30 S50B32.
【Features】FEXON Fan Clutch Wrench Set makes it easy to hold water pump pulleys in place while you loosen and service your radiator fan. The tools have been heat treated to improve product performance..
【Easy to Use】Quickly removes and installs fan clutch when repairing the water pump or fan clutch..

Check Stock

BETOOLL 32mm Fan Clutch Nut Wrench Water Pump Holder Removal Tool Kit Compatible with BMW E34 E39 E36 E46 E90

Only applicable to the following engine models in the BMW models described in the title: M4, M10, M20, M30, M40, M44, M50, M52, M52TU, M54, M56, M60, M70, M73, S14, S38, S50B30, S50B32..
In order to disassemble the water pump on models with temperature-dependent viscosity-driven fans. Note: This 32mm fan clutch nut wrench is only compatible with BMW engines..
The fan clutch wrench removed the lock nut on the hot-tack fan..
The fan clutch bracket allows the technician to fix the water pump pulley in place while loosening the radiator fan..

Check Stock

Performance Tool W80498 GM Fan Clutch Wrench for Vehicle Maintenance in Garages and Workshops, Black/Red, 19 in

◇ For the purpose to remove water pump on models with temperature dependent viscosity drive fans.
◇ Fan Clutch Wrench removes lock nuts on the thermo-Viscous fans.
◇ Fan Clutch Holder allows the technician to hold the water pump pulley in place while loosening the radiator fan.
◇ Suit for:M4,M10,M20 ,M30, M40,M44,M50,M52,M52TU,M54,M56,M60, M70, M73, S14, S38, S54, S50B30, S50B32.

Check Stock

Lisle 43390 36mm Wrench

Quickly removes and installs fan clutch when repairing the water pump or fan clutch.
Faster and easier than conventional fan clutch wrenches.
For more information check the main Lisle tool- 43300.

Check Stock