Top Fabricated Technology Reviews

Schluter Kerdi Shower Kit 38'x38' with PVC Stainless Steel Drain KSK965PVCE with Joint Sealant

  • SHOWER TRAY: the pre sloped shower tray KST965BF (38 Inch x 38 Inch) is machine fabricated to ensure proper water drainage.
  • KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed..
  • WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz).
Check Stock

ReadyLift 66-5075 Toyota Tundra Front Leveling Suspension - Strut Extension

  • Includes one pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
  • Max Lift 2. 4 in. - Max Tire Diameter 33 in..
  • Not for use on 2015-2017 Tundra TRD Pro w/ Bilstein shocks.
  • One pair of fabricated steel top mount strut extensions with differential drop spacers and skid plate spacers.
Check Stock

Moroso 97340 Valve Cover Breather Grommets, Pair

  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1.220" diameter hole.
  • Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
  • Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1. 220" diameter hole Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
Check Stock

CHALA Large Bowling Tote Bag with coin purse Stone Gray Dragonfly - Gray

  • - Material: High Quality Vegan leather- Fabricated flower & metal button details..
  • - Comes with a detachable Animal keyfob/coin purse..
  • - Dimensions: 12" x 16.5" x 7". Handle drop 9.5 inch.
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Silver

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short, Silver.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA)Rectangle Port Intakes only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX - Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

A-Team Performance - EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short - Compatible with GM Chevrolet LS3 L92 SBC Small Block Chevy V8 GEN. III/IV (LS-BASED) Black

  • EFI Fabricated Intake Manifold with Fuel Rails and Throttle Body Short Black.
  • Compatible With: Chevrolet Small Block V8 Gen. III/IV (LS-based) · 4.8 L / 293 In3 (L20, Ly2) · 5.3 L / 325 In3 (Lc9, Lh6, Lh8, Lmg, Ly5) · 6.0 L / 364 In3 (L76, L96, LFA, LY6) · 6.2 L / 376 LN3 (L92, L99, LS3, LSA) Rectangle Port Intake only!.
  • Fabricated Aluminum Sheet Metal Intake Manifold -102MM Throttle Body -Fuel Rails & Cross Over -4-Bolt LSX Gaskets & Hardware are included..
  • Throttle Body is Dive by Cable Overview We Designed Our Fabricated Aluminum Sheet Metal Intake Manifold to Improve the Look and Performance of Your LS Engine..
Check Stock

Schluter Kerdi 38 Inch x 60 Inch Offset Shower Kit with 2 Inch PVC Flange, Stainless Steel Grate and Joint Sealant

  • SHOWER TRAY: the pre sloped shower tray KST965/1525S (38 Inch x 60 Inch Offset) is machine fabricated to ensure proper water drainage.
  • KIT: Schluter Kerdi Shower Kit is an all-inclusive package containing each of the integrated family of components required to create a maintenance-free watertight shower assembly without a mortar bed..
  • WATERPROOFING: All prefabricated components (shower curb and shower pan) are pre-waterproofed, which saves time during installation. The kit also includes all the items you need to waterproof other components of your shower: valve seal (4-1/2 in), pipe seal (3/4 In), 4 inside corners, 2 outside corners, kerdi strainer (KD-STR) and Wedi Joint sealant tube (10.5 oz).
  • EASE OF INSTALLATION: the Kerdi shower curb and Kerdi shower tray are made of high density polymer. The material is lightweight and trimmable to achieve the desired shower base size..
  • WARRANTY: Kerdi shower is covered by the 15 years Schluter Systems manufacturers warranty when built according to the....
Check Stock

KOHLER Task Kitchen Sink, Stainless Steel Dual Mount Single Bowl, 33\ Workstation Sink, 2 hole faucet, K-80084-2PC-NA

  • Premium Steel: 33 inch Task Sink is made of premium 18-gauge stainless steel resists rust and corrosion.
  • Single Bowl: 9 inch depth bowl with tightly angled fabricated corners to maximize a generous workspace.
  • SilentShield Plus: Superior quality sound-absorption technology provides quieter performance.
  • Dual-Mount Sink: Task Sink can be installed either undermount or top-mount (installed above or below your countertop) with two faucet holes.
  • Customized Accessories: Sink includes bamboo cutting board, colander set, silicone sink mat, and sink strainer made to fit perfectly.
  • Minimum Base Cabinet Width: 36" (914 mm).
Check Stock

Squirrelly 3' Inch Stainless Steel Mandrel (2 Pack), High Quality 45 Degree Bends Angles Turbo Custom Exhaust System Fabrication Shops Piping

  • Squirrelly create high quality products and solutions with the same bootstrapped mentality upon which our company was founded. We are early adapters of new technology, utilizing cutting edge manufacturing processes to deliver a superior product..
  • Squirrelly 45 degree stainless steel mandrel bent pipe is designed and fabricated in MN, USA..
  • This 45 degree mandrel bent is made of 304 stainless steels 16-gauge raw finish..
  • The measurements for this stainless steel pipe is measure by 3″ inch diameter with the length of 5 1/2″ long..
  • Package includes: 2x 3″ Mandrel Bend 45 Degree 304 Stainless Steel Mandrel Bent Piping.
Check Stock

Why We Make Things and Why It Matters: The Education of a Craftsman

  • Design: Fabricated through a special technology, the fluted panel design is unique and elegant. The rounded corners also softens the look of the streamlined frame and provides an environment safe for little ones .
  • Adjustable shelf: With 3 set positions, it provides you with the flexibility of customizing your storage needs.
  • Box frame leg: Designed to distribute the weight equally across all 4 legs so you don’t have to worry about uneven legs.
  • Cable management: Holes at the back of the TV Stand provides users with the flexibility to customize your consoles and offer clean cable management.
  • Please expect color variance between actual product and photos due to different lighting conditions and online viewing device settings.
Check Stock

Seachrome 28\ Wall Mount White Padded Folding Shower Bench Seat for Inside Shower

  • DIMENSIONS: 28” L x 15” W, FOLDED DIMENSIONS: 18" L x 13.5" H, 24-7/8" from top of seat to bottom of bracket.
  • 500 LB WEIGHT CAPACITY: Our folding shower bench seat will support up to 500 pounds and meet all ADA code requirements when properly installed.
  • LIFT-ASSIST: Our Lift-Assist patented technology ensures that our folding shower seat is compliant with the ADA five-pound code (309.4 Operation) making it easier to lift than other options on the market.
  • SPACE SAVING SECURITY: The wall-mount folding bench seat provides secure support in the shower and easily folds within 6” against the wall when not in use.
  • DURABLE DESIGN: Fabricated using premium #304 stainless steel and durable water-resistant Naugahyde padded material for comfort and long-lasting use.
Check Stock

Husqvarna Z254F Zero Turn Lawn Mower 54 inches 747Cc 26Hp V Twin

  • ClearCut Fabricated Cutting Deck: The new fabricated design features welded 10-gauge steel construction with additional welded reinforcement strips for maximum durability.
  • Cast Iron Spindle Housings: Bold cast iron blade housings built for durability and featuring sealed ball bearings.
  • Maintenance-Free Transmission: Worry free performance with maintenance free, integrated zero-turn transmissions.
  • Rugged Frame and Casters: The robust frame and casters ensure durability and reduced chassis flex.
  • Convenient Deck Lift: The deck lift system is spring assisted for ease of use and conveniently located within easy reach of the operator.
Check Stock

Husqvarna Z248F Zero Turn Lawn Mower 48 inches 747Cc 26Hp V Twin

  • ClearCut Fabricated Cutting Deck: The new fabricated design features welded 10-gauge steel construction with additional welded reinforcement strips for maximum durability.
  • Cast Iron Spindle Housings: Bold cast iron blade housings built for durability and featuring sealed ball bearings.
  • Maintenance-Free Transmission: Worry free performance with maintenance free, integrated zero-turn transmissions.
  • Rugged Frame and Casters: The robust frame and casters ensure durability and reduced chassis flex.
  • Convenient Deck Lift: The deck lift system is spring assisted for ease of use and conveniently located within easy reach of the operator.
Check Stock