Top Ezarc Carbide Hole Cutter Reviews

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..

Check Stock

Dremel 9909 Tungsten Carbide Cutter,Silver

The product is 1/8" Diameter, Tungsten Carbide Cutter.
Shapes, smooths or grinds especially hard materials including: hardened steel, stainless steel, cast iron, nonferrous metals, fired ceramics, plastics and hard woods..
A high-speed cutter made of tungsten carbide, the hardest material next to diamonds..
Do not use this cutter for drilling holes or for enlarging holes that are less than twice the diameter of the cutter. The tungsten carbide surface can easily catch the side of a hole and break the bit..
For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit..

Check Stock

LIUDAINC Diamond Drill Bit Set Hole 5Pcs Carbide Hole Cutter High Speed Hole Saw Tooth Cutter Drill Bit Kit Deep Cut Hole Saw for Stainless Steel Metal Copper Wood 16/18.5/20/25/30Mm

➤ HIGH QUALITY: This carbide teeth hole saw is made from high quality cemented carbide, ensuring its high hardness, rust proof, sturdy and durable..
➤ 5PCS CARBIDE HOLE CUTTER: There are 5 hole cutters for mental with different diameter sizes, 16/18.5/20/25/30Mm which can meet your various needs..
➤ VARIOUS APPLICATION: Our carbide tipped drill bits are suitable for home decoration and industrial applications, including thick metal, stainless....
➤ FAST & PRECISE CUTS: This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate..
I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.

Check Stock

Diamond Drill Bit Set Hole 13Pcs 16-53Mm HSS Hole Saw Set for Metal High Speed Steel Hole Saw Cutting Kit Drill Bits Opener Cutter for Stainless Steel,Copper,Iron Plastic Sheet Aluminum Plate Wood

➤ HIGH QUALITY: This carbide teeth hole saw is made from high quality cemented carbide, ensuring its high hardness, rust proof, sturdy and durable..
➤ 13PCS CARBIDE HOLE CUTTER: There are 13 hole cutters for mental with different diameter sizes, 53mm,50mm,45mm, 40mm, 35mm, 30mm, 28mm, 26mm, 25mm,....
➤ VARIOUS APPLICATION: Our carbide tipped drill bits are suitable for home decoration and industrial applications, including thick metal, stainless....
➤ FAST & PRECISE CUTS: This hole cutter can precisely cut smooth holes due to the excellent control of the concentricity rate..
I wish you a good day, a good life and a safe life, cordial greetings, sincere blessings, my best regards！.

Check Stock

Dremel 9910 Tungsten Carbide Cutter

The product is 1/8 Inch Diameter, Tungsten Carbide Cutter.
Do not use for drilling or enlarging holes less than twice the diameter of the cutter to avoid carbide surface catching side of hole and breaking.
Secure objects to a stable surface while working.
Use the sides of the cutter (rather than the tip) for effective cutting the tip cuts poorly and can break under pressure.
Use higher speeds for hard woods slower speeds for metals and very slow speeds for plastics.

Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 3'' 76mm )

✔️┋【More Teeth】Includes 15 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 3'' | 76mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable..
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

Mollom Heavy Duty Carbide Hole Saw, Hole Cutter cuts Stainless Steel, mild Steel, Iron, Copper, Brass, Plastic ( 1-3/4'' 45mm )

✔️┋【More Teeth】Includes 10 teeth for faster cutting and more teeth than other brands..
✔️┋【Dimension】Cutting Dia: 1-3/4'' | 45mm.
✔️┋【Extremely Long Life】Carbide hole saw last 10X Long Life over standard bi-metal hole saw, and even can bore up to 0.1 inch thick stainless steel..
✔️┋【High Quality Material】Made from high quality TCT Carbide( Tungsten Carbide Tipped Cutters), High-grade Titanium-plated cemented carbide Tooth, ensuring its high hardness, rust proof, sturdy and durable；.
✔️┋【Multipurpose Tools】This Carbide Hole saw set apply to Bench drill, magnetic drill, gun drill, drill percussion and so on. Perfect for hard metal, stainless steel plate, square tube, iron, cast iron, wood, F.R.P and other general sheet metal；Note: Cannot be used for concrete, tiles and stone..
✔️️┋【Perfect Cutting】The spring loaded pilot bit ejects the cut slug, saving time. The cutter body then cuts a clean, burr-free hole faster than conventional twist drills or hole saws..

Check Stock

Grizzly Industrial C2069 - Panel Cutter - Convex, 3/4\ Bore

Note: stop throwing away the used APKT16504 carbide inserts, uses the two unused corners of the APKT inserts to extends the tools life of the already used APKT 1604 carbide inserts.
Suitable for generic face milling. Surface milling for medium roughing. Recommend for CNC and traditional milling machines..
Uses the two unused comers of APKT 1604 carbide inserts..
Cutter Diameter: 3 inch. Bore Diameter: 1 inch. Number of Inserts: 5. Arbor Hole C: 1".
Extends the life of already used APKT insert by using the two unused edge of the insert which typically used in a 90-degree end mill cutter..

Check Stock

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..

Check Stock

The Best of Metal Blade, Vol. 2 [Vinyl]

EZARC oscillating saw blade with carbide teeth can easily handle the toughest metal applications with 30 × life vs Bi-Metal blades..
Upgrade carbide laser welding technology with a slim body makes the blades extremely strong and durable for heavy duty nails cutting..
Super endurance for hardened materials, e.g. stainless steel, hardened screws and nails, fiberglass and plasterboard boards, etc..
The 'MUST HAVE' caribe oscillating multi tool blades are designed for tough cutting jobs on hard material..
Our universal oscillating tool is suitable for professionals and DIYers. Two extra adapters fit most of the conventional oscillating tools on the market..

Check Stock

EZARC Diamond Oscillating Blade Flush Cutting Oscillating Multi Tool Saw Blades for Grout Removal Mortar and Soft Tile Cut DO34F 3-Pack

【Diamond Cutting Edge】This premium long lasting flush cutting diamond oscillating saw blade has 5 times longer life than carbide grit blades in....
【Precise & Clean Cut】 Diamond grit edge has a kerf approx. 1/16 inch (1.6 mm), which can achieve a perfectly clean and precise cutting effect.....
【Design for Tough】This diamond oscillating multi tool blade is used to remove defective tile grout, cut soft tiles, plaster, and porous concrete....
【Application Scenarios】EZARC diamond oscillating saw blades can be used for bathroom renovation, flooring work, trimming and correcting work,....
【Universal Fitment】 EZARC oscillating multitool blade set includes two additional adapters, which is compatible with most oscillating multi-tool....

Check Stock

B BLOOMOAK Heavy Duty Circular Glass Cutter with Round Knob Handle and Suction Cup Adjustable Diamond Glass Cutter Tool Set 24\(60cm)

Fine Materials: The Circle Glass Cutter is made of polished metal with clear-cut scale, easy to read and use.
Perfect Design: Compass style with round knob handle, fits your palm well. Glass cutter with powerful suction cup holds center tightly wihle blade making circles.
Industrial Grade & Precise: The blade is made of durable tungsten carbide and the cutting life is over 18.6 mile, can cut glasses with a thickness of 1/8 ″-1/2 ". Absolute precision guaranteed with scale in both inch and cm, the circle glass cutter can cut a perfect circle with a diameter of 2.75" to 24".
Best choice for apprentice and professionals: The glass circle cutter is designed for both hobbyists and professionals. You will receive a very detailed instruction to within the package to teach you how to get a round shape or get a round hole.
Free Glass Cutter for You: Come with a professional carbide tungsten oil feed glass cutter, cutting range 1/8"-1/2.

Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..

Check Stock