Top Extruded Titanium Tube Reviews

Apache 98138045 2\ x 50' Blue PVC Lay-Flat Discharge Hose with Aluminum Pin Lug Fittings

  • Resistant to oils, grease, acids, and many chemicals.
  • Male x female aluminum short shanks reinforced by Band-It clamps.
  • Tube/cover are PVC, reinforced with 3 ply polyester yarns, one longitudinal ply and two spiral plies.
  • Both tube/cover are extruded simultaneously to obtain maximum bonding.
Check Stock

Ticon Industries - CP1 (Grade 1) Titanium Welding Filler Rod 39” Length - 1mm/.039' (1/4lb)

  • CP1 grade Titanium Filler Rod offers the the best weldable characteristics of any grade of Titanium for manufacturing exhaust systems or other applications.
  • High Grade Commercially Pure Grade 1 CP1 Titanium offering the highest corrosion resistance and formability of any grade of titanium.
  • 1mm /.039" Titanium Filler is designed for lighter duty use such as thin walled tube welds, sheet to sheet welds, and light duty bracket welds..
  • The 1mm filler rod comes packaged by the quarter pound which usually equals approx. 27 rods in a 39" length.*.
Check Stock

Raypak Heat Pump 8450 Model with Titanium Heat Exchanger 140K BTU 016033

  • Exclusive Dura-Steel Powder - Coated Cabinet - Same rugged steel construction used by all the major air conditioner manufacturers. Fully louvered steel jacket protects the evaporation coil from storm debris, hail and harsh weather..
  • Extremely Tough Composite Base - Rust proof and ultra sound deading base material keeps your heat pump up and running for years while holding sound levels to an absolute minimum..
  • Scroll Compressor - Scroll compressors are quiet and efficient compared to piston type compressors. They provide higher efficiency, lower sound levels, superior durability and unsurpassed reliability..
  • Spiral Titanium Tube - The spiral titanium tube heat exchanger provides a corrosion-free waterway that can withstand the abuses of harsh pool chemistry. The spiral tube helps reduce deposit build-up and increases efficiency by performing a “scoop-and-lift” action..
  • Plumbing Connections Off-set 2” PVC union connections..
Check Stock

Curt 13186 22272 Class 3 Trailer Hitch with 2 Inch Receiver and 2 Inch Rubber Hitch Tube Cover Bundle for 13-19 Ford Escape

  • Compatible with 2013 Ford Escape S, SE, SEL / 14-17 Escape S, SE, Titanium / 18-19 Escape S, SE, SEL, Titanium.
  • Kit Contains: (Part Number: 13186): Class 3 Trailer Hitch // (Part Number: 22272): Rubber Hitch Tube Cover.
  • Class 3 Trailer Hitch Details: (Part Number: 13186): Rated to 3,500 lbs. gross trailer weight and 350 lbs. tongue weight // Compatible with weight....
  • Class 3 Trailer Hitch Details: (Part Number: 13186): Co-cured in a rust-resistant liquid Bonderite coating, inside and out // Equipped with an....
  • Rubber Hitch Tube Cover Details: (Part Number: 22272): Protects 2" x 2" receiver tube opening when not in use // Adds a clean, finished look and keeps....
Check Stock

J2000 Aluminum Ladder Roof Rack 3 bar System with Accessories for a 2014-Newer Transit Connect White

  • Low profile system with height clearance of 7.25" from the roof of the vehicle.
  • Fits Transit Connect 2014-newer XL and XLT model. System will not work with on vehicles with factory roof rails or Titanium models..
  • A285 Crossbars made of extruded aluminum with channels for accessories. Weight capacity 600lb (evenly distributed).
  • System will NOT fit the Ford Transit Cargo Van or Transit Connect 2008-13.
Check Stock

Generic UFO Flying Saucer King Stainless Steel tc4 Titanium Alloy fingertip gyro Collection Decompression Decompression EDC ToyMCZHI Manufacturing TC4 Titanium Alloy

  • "MCZHIMANUFACTURING" original design "UFO" Fidget Spinner.
  • UFO Size: diameter 50MM/ main body thickness 10MM/ pair lock thickness 16MM.
  • Material: TC4 titanium alloy/304 stainless steel/CNC/sandblasting.
  • Weight: titanium alloy 60G/stainless steel 103G Bearing: R188 (idling for 5-8 minutes).
  • Others: 6MM*1.5MM tritium tube slot *16 (excluding tritium tube).
Check Stock

IBOSAD HVAC Hydraulic SWAGING tool kit for copper tubing Expanding 3/8 inch to 1 1/8 inch

  • Made of aluminum alloy,very portable,Easily Swage on the job..
  • Suitable for Used for soft copper tube, Aluminum tube, Titanium tube, soft steel and other soft tube.
  • Comes with 7 dies ranging with 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″.
Check Stock

Derale 13504 Series 8000 Plate and Fin Transmission Oil Cooler , Black

  • Embossed turbulators inserted in each tube agitate fluid for maximum heat transfer.
  • Sturdy furnace-brazed aluminum construction.
Check Stock

Razor Phase Two Scooter

  • Designed, developed and tested by Team Razor Pro Rider John Radtke.
  • Built for pro riders who are looking for a nice, sleek style scooter, perfect for the dirt.
  • New Hydro-formed down tube design and 5" wide extruded aluminum Phase Two 'X' deck.
Check Stock

Focus Foodservice FHADR601812 Heavy Duty Dunnage Rack, 60\ x 18\ x 12\

  • Approved for use in freezers, coolers, displays, as well as packaging and storage areas.
  • High tensile, extruded type 6063-T5 aluminum tube.
Check Stock

Focus Foodservice FHADR48188 Heavy Duty Dunnage Rack, 48\ x 18\ x 8\

  • Approved for use in freezers, coolers, displays, as well as packaging and storage areas.
  • High tensile, extruded type 6063-T5 aluminum tube.
Check Stock

Derale 13503 Series 8000 Plate and Fin Transmission Oil Cooler Black

  • Embossed turbulators inserted in each tube agitate fluid for maximum heat transfer.
  • Sturdy furnace-brazed aluminum construction.
Check Stock

IBOSAD HVAC Hydraulic SWAGING tool kit for copper tubing Expanding 3/8 inch to 1 5/8 inch

  • Made of aluminum alloy,very portable,Easily Swage on the job..
  • Suitable for Used for soft copper tube, Aluminum tube, Titanium tube, soft steel and other soft tube.
  • Comes with 11 dies ranging with 3/8″, 1/2″, 5/8″, 3/4″, 7/8″, 1″, 1 1/8″, 1 1/4″,1 3/8″,1 1/2″,1 5/8″.
Check Stock