Top External Thread Sample Valve Reviews

Ximimark 2Pcs 1/2 Thread Plastic Electric Solenoid Valve Water Inlet Flow Switch Magnetic Water Air Normally Closed Tools DC 12V N/C 0.02 to 0.8mpa

  • The valve body is made of all-plastic material, with 4 points of external thread on both ends of the valve body. The valve body is simple, the power terminal is insert type, and the 6.3 spring is used..
  • The coil is packaged by the international top-grade coil packaging material, and has the advantages of waterproof, moisture-proof, wear-resistant, corrosion-resistant, high-low temperature resistance..
  • The insulation grade is high and the heat dissipation effect is good. Under normal conditions, the product can be used for a long time..
  • This valve is a normally closed solenoid valve, that is, it is energized to turn on (water), and the power is off (water cut)..
  • This is a micro pressure valve (pressure), suitable for 0.02-0.8MPA water pressure, please choose according to your actual needs..
Check Stock

275-330 Gallon Tote Water Tank Adapter 2' Coarse Thread Brass Hose Faucet Valve Garden Hose Connector Replacement IBC Tote Valve Fitting Parts

  • 【Premium Material】The Tank Adapter made of high quality Brass and PP, which is not easy to damage, durable to use. Anti-corrosion, anti-acid and anti-alkaline, has a long service life..
  • 【Specifications】S60X6 2” Coarse Thread IBC Tank Adapter, which converts a 2 inch coarse thread valve into a Brass Garden Hose Ball Valve Faucet 3/4” Ring Connector. Your tank drain outside diameter is actually 60mm or 2.36″, and with coarse thread pitch is 6mm (0.24″)-Most Common Thread Found On European IBC’s. Not American National Standard Straight Pipe Thread. So pls check carefully your IBC tote valve thread is coarse thread before purchasing. Thanks for your cooperation!.
  • 【Widely Applications】This water tank faucet adapter is widely used in garden irrigation, home, industrial irrigation and other scenes. It fits most standard European IBC containers. Can be used as a quick contact switch for IBC tank adapter with coarse thread, this is a great way to stop beating your knuckles on the cage of the Tank. And it also preserves the Life of Your Existing Valve..
  • 【Easy to Install & Use】Safe for using. Fit for IBC tank vavle. The ibc tote garden hose adapter switch is made of high-quality and non-slip plastic, can be shut off quickly by rotate 90 d....
Check Stock

Whirl-Pack Write-On Whirl-Pak Collection Bags - Box of 100 - C32520N

  • Capacity: 1 Liter - Size: 7'' x 9'' - Material: 2 mil Tedlar PVF film - MADE IN USA.
  • Our Tedlar bags utilize a patent pending 2-in-1 fitting. By combining a shut-off valve and Teflon-lined septum, you are able to fill the bag and remove the sample for analysis with one fitting. The stem is used to connect 1/8” ID tubing for filling and emptying the bag. The septum can be used for removing the sample using a syringe. Fittings are available in polypropylene, stainless steel, and Teflon..
  • Guidelines: 1. Store Tedlar bags in a clean area away from potential contamination sources. 2. Tedlar bags are designed for use at atmospheric pressure. Over pressurization (003e2 psi) can cause the bags to burst. 3. Always ensure the bag, fitting, and tubing materials are appropriate for the compounds being sampled. 4. CEL Scientific does not recommend reusing Tedlar bags in most cases..
  • To fill the bag: 1. Connect the appropriate tubing (1/8” ID) from a sampling source to the stem on the side of the fitting. 2. Open the valve by holding the stem and turning the top portion of the fitting counterclockwise one turn. 3. When the bag is full (approx. 90% capacity), close the valve by holding the stem and turning the top portion of the fitting clockwise until it is finge....
Check Stock

YUHX Brass Bidet T Adapter with Shut-Off Valve,3 Way 7/8 or 15/16 and 1/2 or 3/8,Metal T Valve for Bidet Tee Connector Water Diverter Valve

  • ❶ ★ [ Easy to install ] Plastic thread neckline ensures that it will not cause cross-threading and leakage problems , Metal bidet adapter valve can be connected to the toilet filling valve manually without tools , cone washer helps make installation smooth and leak-proof.
  • ❷ ★ [ No-Leak metal t valve for toilet ] It has chrome plated surface , the leak proof design , high quality brass and ceramic valve , compression resistance , explosion proof, ensuring quality and longevity , no need to worry about fracture.
  • ❸ ★ [ Screen Washer Can Extend The Use Time of Bidet ] Includes screen filter washer to bidet line , Bidet shut off valve adapter with 1/2 filter screen sealing washer Can capture sand , dust , rust or other sediment particles entering the bidet , effectively prevents water damage.
  • ❹ ★ [ Brass t-valve bidet connection Size ] 7/8 female thread to the toilet filling valve , 7/8 male thread to the water supply ( 7/8 cock thread compatible 15/16 – 14UNS ) , 1/2 thread or 3/8 Compression thread to the bidet hose.
  • ❺ ★ [ 7/8 bidet adapter t valve ] Used to shut off water flow when not in use and adjust water pressure to suit your needs, there is no need to worry about affecting the water flow of the toilet after installing the bidet ....
Check Stock

Bidet T Adapter with Shut-Off Valve,3 way T Adapter for Bidet,Brass T Adapter Bidet Tee Connector 7/8”1/2”16/15”,T Adapter Valve for Handheld Toilet Spray

  • ...lve is with plastic leak-proof connector, Plastic bidet t adapter can be connected to the filling valve easily without tools. The leakproof pad makes installation smooth and safe. *NOTE: This T-adapter valve is only suitable for toilet tank connection, not for shower head, sink and faucets..
  • [ Easy Install ] Plastic thread neckline ensures that it will not cause cross-threading and leakage problems. Metal bidet adapter valve can be connected to the toilet filling valve manually without tools, cone washer helps make installation smooth and leak-proof.
  • [ High Quality T Valve for Toilet ] Our t adapter bidet has chrome plated surface,the leak proof design,high quality brass and ceramic valve, compression resistance,explosion proof,ensuring quality and longevity,do not worry about fracture..
  • [ T valve bidet connection Size ] This bidet t adapter 7/8 female thread to the toilet filling valve, 7/8 male thread to the water supply(7/8 cock thread compatible 15/16 – 14UNS),1/2 thread or 3/8 Compression thread to the bidet hose.
  • 【After Service】Each brass metal T adapter valve diverter has passed strict quality test, We will provide the t adapter 2 years technical support and 60 days full refund.if you have any problem,please contact with us any time,we will ....
Check Stock

Washing Machine Water Splitter, Laundry Sink Y Wye Water Splitter Valve, Female G1/2' to G3/4', G1/2'Male

  • Material: Brass fitting, solid construction.(CAN’T BE USED FOR GARDEN HOSE).
  • Size: G1/2″Female , G1/2″Male. (CAREFULLY CHECK SIZE IN PICTURE).
  • Water Splitter Valve: Splits one water flow into two to satisfy your using demand..
  • Application: Fits Washing Machines / Laundry Sink Y Wye Water Splitter.
  • Easy Use: With On/Off adjustable valves, easy to control,Thread Specification: the internal and external threads of the diverter are G1/2, and the adapter thread is G1/2 ,Fit for Standard G1/2 diameter connection.
Check Stock

3/4\ Ball Valve, 1 Pack Male NPT (MNPT) X Female NPT (FNPT) Thread,Stainless Steel Shut-Off Valve for Water,Oil and Gas (3/4 inch, 1 pack)

  • Ball Valve：Male NPT (MNPT) X Female NPT (FNPT) screw thread connections,1,000 WOG (PSI) full port heavy duty ball valve is made of 304 stainless steel,safer and stronger,anti-corrosion,long lifetime..
  • Good Sealing：KAPUNOS ball valve has two sealing surfaces with good sealing performance,it can achieve complete sealing..
  • Convenient Operation：KAPUNOS high pressure ball valve has a comfortable operating handle,which opens and closes quickly,It only needs to rotate 90° from fully open to fully closed, which is convenient for quick control. When the handle is parallel to the pipe body, it is in an open state, and when it is vertical, it is in a closed state, so it is more convenient to observe whether the valve is open..
  • Widely Used：Ball valves are widely used in gardens, water pumps, corner rainwater tanks, external taps, rainwater connections with buckets, rainwater collectors, water pipes, etc. Also can be used for mechanical equipment, industrial equipment, water supply and drainage equipment..
  • Suitable for Media：The high-quality 304 stainless steel ball valve is suitable for water, sea water, air, oil and steam media.Since the ball valve has wiping properties during opening and closing, it can be used in media with suspended solid particles..
Check Stock

2PCS Universal Splash Filter Faucet, 720°Rotatable Kitchen Anti-Splash Faucet Aerator with 2 Water Faucet,4-Layer Net Filte, Leakproof Design Double O-Ring Sink Aerator

  • 720 Degree Big Angle: The sink faucet aerator can be rotated 720 degrees,so that the water flow can reach every corner of the sink，so convenient to wash your face, eyes，mouth and Clean basin ，Your family life will be more convenient because of it..
  • Safe & User-Friendly Design: Our splash filter faucet is designed with oxygen-enriched foam (splash-proof, soft to the touch), 4-layer filter (removes impurities and maintains health) and enhanced double O-ring valve (100% anti-leakage). The faucet aerator is suitable for restaurant, laundry and back yard cleaning..
  • Easy Installation: This sink faucet sprayer set have 2 Faucet aerator, 6 Faucet adapter,6 O-ring valve.Various accessories can help to apply internal and external threads,So very easy to install by yourself..
  • 2 Water Modes: This swivel sink faucet aerator have 2 Water Modes, Soft Bubble Stream(1.8GPM) fits for washing hands, face, and gargle. and Strong Sprayer Shower mode makes items cleaned quickly..
  • Pay Attention to Size: 0.86 Inch Female Thread Aerator (Your faucet male thread diameter outside approximated 21.5-22mm actual measurement will fit), 0.94 Inch Male Threaded Adapter was inclued (Your faucet female thread diameter inside approximated 23.5-24mm actual measurement will fit)..
Check Stock

MMC Closed/Gas Tight Sampling System, 100' Tape

  • Includes Sampler barrel, 1/2 ltr stainless steel zone sampler, sample collection diverter valve, sample bottle fill attachment, 1 sample bottle and 1 24mm dia. stainless steel innage bob..
  • Optional adapter to fit Hermetic and Tanktech valves available.
Check Stock

Autosampler Vials, Membrane Solutions 2ml HPLC Vials, 9-425 Lab Clear Vials with Write-on Spot and Graduations, 9mm Blue ABS Screw Caps & Septa for GC Sample Vials, 100 Pcs

  • LOW EXPANSION COEFFICIENT - 9mm Screw Thread Autosampler Vials are made of clear Type 1, Class A Borosilicate Glass with very low expansion coefficient. It shows excellent chemical resistance to acidic and neutral solutions, due to its relatively low alkaline content even to alkaline solutions..
  • ATANDARD UNIVERSAL VIALS - Our HPLC sample vials is 12mm Diameter, 32mm Height, compatible with Agilent (1042, 1050, 1080, 1082, 1084, 1090, 1100, 5890, 6850, 6890, 7670A, 7671A, 7672, 7673A/B, 7683, 7890, 8042), Bruker (8100/8200, Marathon), Varian(Marathon), Waters, Thermo, etc..
  • [9-425 SCREW VIALS] - 2ml sample Vials with unique thread design ensures consistent seal and can be reused, not volatile, easy to use, Amber vial with large writing patch for sample identification and it with ISO 9001 certificated..
  • PRESLIT PTFE/SILICONE SEPTA - 2ml Clear GC sample vials included blue ABS Screw Cap & Septa (Blue PTFE/White Silicone Liner). The preslit Septa can reduce flat pins curving and When collecting in large quantities, prevent negative pressure from forming in the sample bottle. It is highly recommended to use pre-opening septa for Shimadzu, Hitachi and other autosamplers with finer needle specifications.
  • APPLICATION - Standard Autosampler Vial for HPLC & GC Chr....
Check Stock

GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7

  • 【Versatile】This 3-Port Brass Female Threaded Air Compressor Check Valve excellent replacement for the old or broken check valve of your air compressor.
  • 【Easy to install】Easy to install with the thread connecting ends, the three male thread connectors are respectively for tube connecting, air pressure tank and compressor piston pump.
  • 【Package Content】 1 x Air Compressor Check Valve.
  • 10mm Female Thread Tube Connector Air Compressor Check Valve, Male Thread : 16mm Hex Head Size : 18mm.
  • 【After-sale Service】Each Compressor Check Valve is quality checked, we provide 30-day money back service or exchange for customers, just feel Free to contact us if you have any problem with the product, we will solve for you within 12 Hours.
Check Stock

Inflatable Air Valve Replacement Screw Air Valve for Inflatable Rubber Dinghy Raft Pool Boat Fishing Boats 2pcs

  • High Quality: This Inflatable Air Valve is made of quality high dense ABS plastic, sturdy, anti and durable..
  • Size: Diameter of Thread Part: Approx. 20 mm / 0.78 inch. Length of Thread Part: Approx. 16 mm / 0.62 inch..
  • Cap Design: The fine design with a valve cap ensures antileak inflation. The bottom of the air plug has a rubber mat which can prevent leaks more effectively, give you safer protection..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good performance and long serve life..
  • Wide Application: This Inflatable Air Valve fits most inflatable boat, raft, rubber dinghy, etc. Package Included: 2 * Air Valves. Comes in pair, good replacement accessory for your inflatable boat..
  • Quickly Inflation & Deflation: The valve is a oneway inflation valve, good for quick inflation. Easy to fit, good perf....
Check Stock

lukar 3/8" High Pressure Washer Ball Valve Kit with Teflon Tapes for Power Washer Hose, 4500 PSI

  • ①【Superior 3/8 Ball Valve】: lukar 3/8" ball valve pressure washer is made of high quality stainless steel + copper, durable, leakproof, rustproof, high temperature and pressure resistant.
  • ②【High Pressure Ball Valve Specification】 : 3/8" high pressure ball valve kit. 3/8" quick connect plug, 3/8" male NPT thread.
  • 3/8" quick connect socket, 3/8" male NPT thread. Max working pressure: 4500 PSI, Max working temperature: 158 °F.
  • ③【Easy to Use】: The 3/8 high pressure washe ball valve kit is easy to turn on and turn off, and provides good leverage under high pressure. Easy to connect to surface cleaner ,pressure washer gun, nozzle, pump and high pressure hose.
  • ④【Leak Proof】: lukar high pressure ball valve kit comes with 2 x teflon tapes. Teflon tape is used to wrap around the thread to effectively prevent water leakage.
  • ⑤【Package Includes】: 1 x high pressure washer ball valve.
  • 2 x Teflon Tapes, 2 x thread protection covers(Shown in the first image in listing).
Check Stock