Top External Board Reviews

SunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
  • The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
  • This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

JMgist Reflector Line Board Paintless Dent Repair Tools with Adjustable Holder for Car Body dent Removal Yellow Stripe Testing Tool

  • 【Reflector Board Tool】Line Board Reflector Board use for detecting the dent on the surface of auto body and other metal surface..
  • 【Flexible Material】Line Board and adjustable holder are made of strong PVC composites,not easy to break, it can be bent freely and it is good....
  • 【Light Weight】This Line Board Reflector Board has been professionally tested,it is lightweight,durable,colourful and highly recognizable,no....
  • 【Easy Operation】Reflector Line Board is light weight durable, colourful and highly recognizable, not fading,not external power required and not....
  • 【Widely use】Widely used in the detection of car dent repair.This tool lets you better see the area you are working on to repair car dings and....
Check Stock

BIGTREETECH Octopus V1.1 Control Board 32bit Silent Board Compatible TMC2209, TMC2240, TMC2208, TMC5160 Stepper Driver, Support DIY Klipper and Raspberry-Pi Online Printing for Voron 3D Printer

  • A combination of duet3 mini5 + and Mini 2 +, for Mini 12864 LCD or 5i Smart Disply screen. For Vorn printer. Max input 28V. The firmware has been burned, only need to Set up your printer and update the firmware through the web interface. Support Wif and Ethernet by replacing the module for the switching. Supports external antenna..
  • Its main control chip and pin allocation are completely consistent with mini5 +. Based on same54p20 (arm cortex M4 @ 120mhz), it is fully compatible with duet3 mini5 +..
  • Upgrades on the power supply and IO protection, Input / output IO full with TVS protection, Automobile fuses( for hot bed input and main power input), all make it safer and more stable..
  • Size: 148.5 x 87mm. XH2.54 connectors, 7x PWM power MOSFET output, On board TF card slot, 2×4 row pin lead out for external SD card module, Type-C USB socket. Based on the good performance of RRF firmware and the on-board 7-axis (7pcs tmc2209 stepper motor driver), the board can be easily configured for a variety of models, such as Vorn series, multi z-axis models, dual x models, etc..
  • Package includes: BIG-DIPPER Motherboard x 1, Gray Cable x 1, External Antenn x 1, Heat Sinks x 7. If you have any questions, you can contact us via Amazon. We will help you to solve the proble....
Check Stock

DC Audio LVL3-M2 12' Level 3 900W/1800W Dual-2-Ohm Car Audio Subwoofer/Sub

  • Safe Protection: the 2 channel amp board is designed with input reverse connection protection, short circuit protection, over heat protection, overcurrent protection, overvoltage protection, undervoltage protection.
  • Additional Function: it is available to connect external mute function (MUTE: High level mute, factory default low level).
  • available to add an external Shutdown (SD: the chip will be Shutdown at low electricity level, factory defaults high electricity level..
Check Stock

MakerFocus Raspberry Pi 4 Battery Pack UPS, RPI Pack Standard 10000mAh Raspberry Pi Battery USB Pack Raspberry Pi Latest Version V3Plus Expansion Board Power Supply Type-C for RPI 4B 3B+ 3B 2B+

  • ...ower supply★ The document link is obtained in the product description.
  • The link to the assembly video is available on the product page, Two power supply modes: outdoor portable type and indoor UPS power supply mode: 1) As an outdoor portable power supply, the main board is powered by a lithium battery. The maximum external power supply capacity is: 5.1V. 2.5A. 2) As an indoor UPS power supply mode: the UPS power supply interface is connected to an external 5V power supply, the power supply requires 5V 2A-3A, and the maximum output current can reach 5V 3A..
  • 4+2LED are designed to show the status of battery power, charge or discharge:1) 4 Battery power LEDs: Used to show the current battery voltage and power. 2)The function of the Power LED is to display whether the UPS is supplying power to the Pi, and the LED is on: it means the output is 5V. LED off: Indicates that there is no voltage at the output. 3) Charge charging indicator LED: When the UPS is externally charged via the TYPE-C USB interface, the Charge LED starts to work.
  • The UPS has overcharge and overcurrent protection functions: When the UPS externally outputs about 4A, the UPS will consider the external circuit to be in a short-circuit state and automatically cut off the output. The lithium ....
Check Stock

DORHEA 4Pcs for Nano V3.0 ATmega328P Nano Board CH340 5V 16M Micro USB Microcontroller Board with PIN Headers Pin Unsoldered Compatible with Electronics Development Board Nano 328P Nano 3.0

  • The Nano for motherboard can be powered via the Mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source..
  • The nano has 8 analog inputs,each of which provide 10 bits of resolution.By default they measure from ground to 5 volts, though is it possible to change the upper end of their range using the analogReference function. Analog pins 6 and 7 cannot be used as digital pins, some pins have specialized functionality..
  • It is a smallest, complete and breadboard friendly board. It has everything that board has (electrically) with more analog input pins and on board +5V AREF jumper, compatible with Windows, Mac and Linux operating system..
  • More breadboard space:Nano's got the breadboard-ability of the Mini USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND ）on one top, power and ground on the other..
  • This board is using the chips ATmega328P and CH340, not FT232, Support ISP download.
Check Stock

479tk Fox Red Trainer Karambit, Model, 3.00" Blade Length, Blunt Edge, Liner Lock, Reversible Clip, Dull Version of Fox 470 G10, For Practice and Training, Made in Italy

  • ...ab X2 High-quality, IR-loading stereo cabinet simulation pedal, Includes 14 user preset slots that can store two different cabinet simulation settings each.
  • The Cab X2 supports flexible stereo setups, allowing the option to bypass the cab sim pedal itself and connect to an external amplifier, sound board, PC, or pedal board. Two footswitch modes are also included and can be configured as a traditional on/off switch or to cycle through presets..
  • Designed to make management of all your presets and IR files simple, the Cab X2 editor software is free to download for MacOS/Windows and makes setting up your X2 fast and easy. Simply download the software, connect your X2 with the included USB cable, and tweak your cab simulation files to perfection..
  • Slience Pratice, while away from your PC, the Cab X2....
Check Stock

Ab Board Abdominal Liposuction Foam Op Lipo Surgery Abdominal Compression Board Gray

  • BEST&SOFT MATERIAL：This ab board post surgery liposuction Ab lipo board made out of Polystyrene，which has soft seams that won't irritating your skin and incisions, fast-drying external lining protect you and your tummy from the discomfort..
  • GREAT DEVICE DESIGN: It is nice, sturdy and has a perfect thick size, Foam board post lipo it can be worn under any tight girdle or bodyshaper for tummy flattening. The abdominal board Works fantastically by keeping everything in its right place, curved design to fit your belly perfectly..
  • COMPRESSION FOR POST OP RECOVERY：Wearing this lipo foams and boards will help out in the recovery process, tummy board give you a really tight fit that compress the upper and lower abdomen area, help accelerate healing, reduce swelling and bloating. It applies pressure to liposuctioned areas to ensure that flattened abdomen resolves faster..
  • AN UNDERCOVER TUMMY FLATTENING DEVICE - This liposuction bbl ab board is ergonomic and when placing a post surgery compression garment on, lipo compression board will become virtually invisible underneath. You will be able to wear your favorite outfits without anybody noticing..
  • GOOD CHOICE: This post surgery foam exerts the pressure necessary to avoid formation of fibrosis or bruising aft....
Check Stock

HiLetgo EGS002 Pure Sine Wave Inverter Drive Board SPWM EG8010+IR2110+LCD Module

  • EGS002 Pure Sine Wave Inverter Drive Board.
  • External Serial LCD Module 1602 displays.
Check Stock

Peavey VYPYR® X1 Guitar Modeling Amp

  • 36 on-board amp models including 6 acoustic and 6 bass amp models.
  • 12 stompbox effects with dual parameter control.
  • On-board looper with optional Sanpera(tm) footswitch.
  • 3.5mm aux in for connecting external audio sources.
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

309520-001 - HP Smart Array 6402 Dual-channel SCSI RAID Controller 309520-001

  • Smart Array 6402 / 6404 (base board) Ultra320 SCSI controller.
  • Has two internal or two external Ultra320 SCSI channels.
  • 133MHz PCI-X interface with RAID XOR engine.
  • Does not include cache memory module or dual channel daughter board.
Check Stock

Franke EDOX33229-1 Sink, 33\ x 22\ x 9\ deep, Onyx

  • Number of chambers: 1. Cut in countertop by template: no. Drainer position: reversible model. Additional information: hidden transfer. Cut in countertop: 764 x 484 mm..
  • External dimensions: 780 x 500 mm. Dimensions of the main bowl: 350 x 430 x 180 mm..
  • With draining board, Auto Plug, round knob, stainless steel/Silky Sheen.
Check Stock