Top Expertadvice Reviews
Traveler's Choice Dana Point Hardside Expandable Luggage Set, Lavender, 3-Piece
- Hardshell with textured finish prevents abrasive scratches and finger prints.
- Sleek multiple-stage retractable aluminum push-button handle system.
- 360 degree 8-wheel spinners allow upright rolling in multiple directions.
- 22" spinner features a built-in USB port and interior power bank compartment that provide quick connection to your portable electronic device for a quick charge..
- 30” Spinner Exterior Dimensions: 30”H x 19.5”W x 12”D + 2” Exp. (Weight 10.07 lbs.).
- 30” Spinner Interior Dimensions: 27.5”H x 19”W x 11.5”D + 2” Exp..
- 26” Spinner Exterior Dimensions: 26”H x 16.5”W x 10.5”D + 2” Exp. (Weight 8.20 lbs.).
- 26” Spinner Interior Dimensions: 23.5”H x 16”W x 10”D + 2” Exp..
- 22” Spinner Exterior Dimensions: 22”H x 14”W x 9.25”D + 2” Exp. (Weight 7.05 lbs.).
- 22” Spinner Interior Dimensions: 19.5”H x 13.5”W x 8.75”D + 2” Exp..
BIGTREETECH TFT35 V3.0 Touch Screen Display RepRap Smart Controller Panel Compatible with SKR V1.3 SKR PRO Board for 3D Printer Part
- ❤【32 Bit High Performance Microprocessor】TFT35 V3.0 touch screen uses 32 bit ARM level Cortex-M3 series STM32F207VCT6,120MHz frequency....
- ❤【Two Working Modes】TFT35 V3.0 Touch screen support UART serial port screen mode(touch screen mode) and 12864 screen mode,serial screen mode....
- ❤【12864LCD Mode】The 12864LCD mode includes EXP1, EXP2, EXP3, where EXP1 and EXP2 are general motherboards LCD screen interface, while EXP3 is....
- ❤【More Extension Ports is Reserved】 TFT35 V3.0 display reserve the extension port of filament break detection ,automatic shutdown after....
- ❤【Firmware Update】 It is easy and convenient to update firmware by SD card,download from our github, copy and save it to SD card.firmware must....
BIGTREETECH SKR Mini E3 V2.0 Control Board 32Bit New Upgrade for Creality Ender 3 with TFT35 E3 V3.0 Graphic Smart Display Controller Board 3D Printer Parts
- 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
- Upgrade the firmware by SD card. It is easy and convenient to....
- 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
- 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
- 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
- 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output
- 【TFT35 E3 V3.0】 ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz.
- Upgrade the firmware by SD card. It is easy and convenient to....
- 【SKR Mini E3 V2.0】 ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip.
- 【TFT35 E3 V3.0】 This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen....
- 【TFT35 E3 V3.0】 LCD12864 mode uses EXP1, EXP2 and EXP3. EXP1 and EXP2 are LCD screen ports of normal motherboard. EXP3 is the LCD interface used....
- 【After-sales Support】If you encounter any problems, please write us via Amazon as soon as possible. We have professional technical after-sales....
it luggage Encompass 3 Piece Hardside 8 Wheel Expandable Spinner Set Sandy Skin 3 Pc
- Superior wheel control – Constant design & testing ensures the performance of our wheels lead the industry..
- Luxury detailing - Tan PVC design on front panel with matching components adds to the stylish aesthetic.
- Space expansion from the middle - This provides up to 25% extra space while still ensuring stability. Sturdy trolley system - Tried and tested tough....
- Small Piece Overall Dimensions: 20.9 x 14 x 9.1" + 2.5" Exp, Case Dimensions: 18.5 x 13 x 9.1" + 2.5" Exp, 6.37 lbs.
- Medium Overall Dimensions: 26.8 x 18.7 x 11.4" + 3" Exp, Case Dimensions: 25 x 17.7 x 11.4" + 3" Exp, 8.66 lbs.
Traveler's Choice Dana Point Hardside Expandable Luggage Set, Lavender, 2-Piece
- Hard-shell with textured finish prevents abrasive scratches and finger prints.
- Sleek Multiple-stage retractable aluminum push-button handle system.
- 360 degree 8-wheel spinners allow upright rolling in multiple directions.
- 22" Spinner features a built-in USB port and interior power bank compartment that provide quick connection to your portable electronic device for a quick charge.
- 30” spinner Exterior Dimensions: 30”h x 19.5”W x 12”d + 2” Exp. (Weight 10.07 lbs.).
- 30” spinner interior Dimensions: 27.5”H x 19”w x 11.5”D + 2” Exp..
- 22” spinner Exterior Dimensions: 22”h x 14”w x 9.25”D + 2” Exp. (Weight 7.05 lbs.).
- 22” spinner interior Dimensions: 19.5”H x 13.5”W x 8.75”D + 2” Exp.
U.S. Traveler Aviron Bay Expandable Softside Luggage with Spinner Wheels, Navy, 2-Piece Set (23/31)
- Made from durable twill polyester fabric. The exterior boasts two large exterior pockets for last minute items. The large interior zippered mesh pocket for easy organization..
- A push-button multi-stage handle adjusts to different heights. Top, bottom and side carrying handles for easy handling..
- Features four 360-degree spinner wheels for easy mobility. All pieces roll upright so there is no weight on your arm..
- Includes a 2-inch expansion gusset for extra packing space. Includes a full interior lining with compression straps to keep items in place..
- 31” Spinner’s Exterior & Interior Dimensions: 31”H x 18”W x 11”D + 2” Exp. (8. 57 lbs. ) & 28”H x 18”W x 11”D + 2” Exp..
- 23” Spinner’s Exterior & Interior Dimensions: 22. 5”H x 14”W x 8”D + 1. 5” Exp. (6. 5 lbs. ) & 20”H x 14”W x 8”D + 1. 5” Exp..
Adidas ThinTech EXP Golf Spikes | Silver
- Lower profile – New generation low profile thintech EXP cleat design – 13% lower to the ground..
- Traction/stability – 75% increase in leg tip surface area providing increased stability, traction, cleat durability and reduced green disruption..
- Lightweight – PINS IV system, coupled with the new thintech EXP cleat design, provides a 15% lighter system..
- PINS IV system – at 3.5 mm, thintech EXP is the lowest to-the-ground attachment system in the industry..
- Green-friendly – Increased leg deflection angles for greater dynamics and less disruption..
Makerbase MKS MINI12864 V3 Insert SD Card Front/Side LCD Smart Display Screen 3D Printer Parts MKS SKR VORON Mini 12864（Side Style）
- 1.RGB multi-color backlight, support knob to directly adjust settings, simple operation, cool effect.
- 2.Compatible with a variety of firmware displays, only need to enable the corresponding screen type in the firmware, no other complicated settings.
- 3.MKS MINI12864 V3 is connected using EXP1 and EXP2 interfaces, EXP1 and EXP2 on the BTT SKR Motherboard are in opposite directions to the mini12864,please remove the lock latch of the cable first..
- 4.MKS MINI12864 V3 have two types, Insert SD Card Side/front, which can be selected according to the structure of different types of printers..
- 5.If you have any difficulties during use, please contact us and we will help you solve it.
6 PIN Graphics Card Cable for EXP GDC Beast Laptop External Independent Video Card Dock - Computer Components PCI Cards
- Computer Components PCI Cards - This 6 PIN cable is a accessory only for EXP GDC Beast Laptop External Independent Video Card Dock EXP GDC Beast Laptop External Independent Video Card Dock:.
- 6 PIN Graphics Card Cable for EXP GDC Beast Laptop External Independent Video Card Dock - Computer Components PCI Cards.
KOET Video Card Dock NGFF Conversion Cable for V8.0 EXP GDC Beast Laptop External Independent PVC Converter Cable Adapter
- Used for V8.0 EXP GDC external independent video card dock. Lower than V8.0 would not be compatible..
- Compact size and lightweight, easy for carry..
- This is the converter cable adapter for connect Laptop to EXP GDC adapter..
- With these cable , the EXP GDC can connect the external graphics to laptop..
- Package included:1pc x conversion cable, Size: 75cm, Material: PVC, copper.
27.56 Inch EXP GDC Beast HDMI to Mini PCI-E Cable Portable HDMI to Mini PCI-E Cord
- APPLICABLE EQUIPMENT：This is a dedicated HDMI to Mini PCI-E cable, which can be used for V8.0 EXP GDC external independent video card base, but hdmi to mini pci-e cable cannot be used on V6.0 or V7.0..
- COMPATIBILITY NOTICE：This HDMI to Mini PCI-E cable is EXP GDC Beast HDMI to Mini PCI-E cable, which may not be suitable for all laptop models, so you need to pay special attention before buying..
- PURCHASE NOTICE：This HDMI to Mini PCI-E cable is a dedicated cable. The HDMI interface is not a standard HDMI interface. If you connect other HDMI interfaces, the EXP GDC device will be damaged..
- EASY TO USE：This HDMI to Mini PCI-E cable is 70 cm/27.56 inches long, compact and exquisite, lightweight and portable. Video card dock ngff conversion cable with portable design and long enough cable make the use of this cable very convenient..
- AFTER-SALE GUARANTEE：If you have any questions about the EXP GDC beast external HDMI to PCI-E graphics card separate interface cord adapter, please feel free to contact us before returning. We always stand behind and provide excellent after-sales service!.
