Top Exhaust Tips For Sound Reviews

AUTOSAVER88 3 Inch Dual Exhaust Tip, 3' Inlet 3' Outlet 9.5' Overall Length Chrome Polished Stainless Steel Double Layer Staggered Diesel Exhaust Tail Tip for 3.0' Outside Diameter Tailpipe, Weld On

  • universal fits 3″ outside diameter of trucks car exhaust tailpipe (Note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

3 inch Exhaust Tip, MONOKING Black Exhaust Tip 3 inch Inlet Stainless Steel Clamp On Tailpipes for Truck Car 3″ Inlet 4″ Outlet 12″ Long

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • CLAMP ON INSTALL – Holds up long time! Well thought out clamping mounting. It takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and clamps down tightly by tightening screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and....
Check Stock

AUTOSAVER88 2.5 Inch Dual Exhaust Tip, 2.5' Inlet 3' Outlet 9.2' Length Chrome Polished Stainless Steel Double Layer Staggered Exhaust Tip for 2.5' OD Tailpipe, Slant Angle Cut, Weld On, Universal

  • universal fits 2.5″ outside diameter of trucks car exhaust tailpipe (Notice: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: Built from high-strength stainless steel, our chrome exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: The thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: Please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 Universal Dual Exhaust Tip 2.5 Inch Inlet, 2.5' Inlet 3.5' Outlet 9.5' Length Chrome Polished Stainless Steel Exhaust Tailpipe Tip, 2 1/2 Inch Double Layer Staggered Exhaust Tip, Weld-On

  • universal fits 2.5″ outer diameter of trucks car exhaust tailpipe (note: please measure dimension to make sure it will fit before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: weld-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 1.75-2.25 Inch Adjustable Dual Exhaust Tip, 1.75'-2.25' Inlet 3' Outlet 8.66' Long Stainless Steel Double Layer Exhaust Tail Tip for 1.75'/2.0'/2.25' O.D. Tailpipe, Bolt On, Black Plating

  • Dimension: 1.75-2.25 inch adjustable inlet diameter.
  • universal fits 1.75″/2.0″/2.25″ outside diameter exhaust pipes whatever its Year/Make/Model is (Note: please measure dimension to make sure the outside diameter of your tailpipe is between 1.75-inch and 2.25-inch before purchasing).
  • Anti-deformation & rustproof: built from high-strength stainless steel, our exhaust tips perfectly decorate your tailpipe system with polish stainless surface.
  • effectively anti-corrosive, avoid rust and deformation for enhanced durability.
  • Stylish & pleasant-sounding: the thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound, meanwhile, the light black plating finish gives your car a new & sporty appeal.
  • Easy installation: Bolt-on design, double layer wall, slant angle cut, rolled edge.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of exhaust tips (NOTE: Professional installation would be highly recommended).
Check Stock

Lexx MXe Slip-On Silencer With Mid-Pipe - Fits Honda TRX 400EX 1999-2008

  • Lightweight design saves up to 3.5 lbs. over the stock exhaust..
  • Included 46mm Race Tip for closed course competition..
  • Includes USFA approved Quiet Core spark arrestor insert that brings sound levels down below 96db..
  • Optional tuning exhaust tips and optional screen type Spark Arrestor are available to allow user to further tune power and sound characteristics..
  • Constructed of lightweight 6061 T6 aluminum and durable 304 stainless steel. Limited lifetime warranty..
Check Stock

Caltric Exhaust Pipe Gasket Compatible With Suzuki Dr-Z400 Dr-Z400E Dr-Z400S Dr-Z400Sm 2000-2017

  • This angle is not always present on the competitions exhaust tips as it is more time consuming to manufacture..
  • This Billet exhaust tip fits on the end of your OEM Yamaha exhaust system increasing your rides overall performance and sound..
  • This angled outlet directs the exhaust fumes down and away from fenders and tailgates..
  • This power tip can be used either with or without the stock exhaust screen..
Check Stock

TCMT 21" Front Wheel Rim Dual Disc Flange Wheel Hub Front Fender Fit For Harley Touring Non ABS Models Road King Electra Street Road Glide Ultra Limited 2008-2023

  • Turn heads with the classic hot rod sound produced by these Vance & Hines 2-Into-2 Exhaust Pipes.
  • Crafted using 16-gauge steel, these 2-1/2" diameter pipes are downward-curved with scalloped end tips, featuring full-coverage heat shields for blue-proof chrome and removable baffles.
  • Big Radius 2-Into-2 Chrome Exhaust Pipes produce more torque and horsepower than stock pipes, giving you the look, sound and performance Harley riders expect from Vance & Hines.
  • Vance & Hines Big Radius Chrome 2-Into-2 Pipes are made in the USA.
  • Vance & Hines does not ship metal exhaust port gaskets with the Big Radius Chrome 2-Into-2 Pipes. Metal exhaust gaskets may be purchased separately 4400281.
Check Stock

BRAND NEW FLOWMASTER OUTLAW CAT-BACK EXHAUST SYSTEM,3

  • Brand New Flowmaster Outlaw Cat-Back Exhaust System, 3" Stainless Steel Pipes, Dual Out Rear, Compatible with 2015-2017 Mustang GT 5.0L Coupe (Holley Part #817734).
  • Flowmaster Outlaw Cat-back exhaust system is perfect for the person looking for a deep & very aggressive sound level inside & outside the car. This bolt-on emissions-legal system features our exclusive dual 3" Scavenger Series X-pipe for maximum power & a deep unique sound..
  • The stainless steel X-pipe flows into a pair of our race proven Outlaw Series mufflers & exits into dual mandrel-bent 3" stainless steel tailpipes which are finished off with large 4" polished stainless steel tips. The system is designed for an easy fit & includes all necessary parts & hardware for an easy install..
  • Features: Includes our Exclusive Scavenger Series X-pipe | Very Aggressive Interior & Exterior Sound | Uses the Factory Hanger Locations | Dyno Tuned For Maximum Power | Race-proven Outlaw Mufflers | Stainless Steel Construction.
Check Stock

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.
Check Stock

AUTOSAVER88 1.5-2.5 Inch Exhaust Tip, 1.5"-2.5" Inlet 4" Outlet 9" Long Blue Burnt Stainless Exhaust Tip with Clamps and Adapters Fit for 1.5"/1.75"/2.0"/2.25"/2.5" Outer Diameter Tailpipe, Bolt-On

  • Dimension: Standard 1.5"-2.5" x 4" x 9" (inlet, outlet, and overall length).
  • Fits for cars with 1.5"/1.75"/2.0"/2.25"/2.5" outside diameter exhaust pipes, no matter what its model is (Please make sure the outside diameter of your car tailpipe is between 1.5-inch and 2.5-inch before purchase).
  • Anti-deformation & rustproof: built from high-grade stainless steel with blue burnt finished, our exhaust tips effectively resist heat, rust and deformation to protect & decorate your tailpipe system well.
  • Stylish & pleasant-sounding: sleek rolled-edge angle cut and thicker inner wall design make your car sounds rumble and crackle for a more powerful and unique sound while giving your car a new & sporty appeal.
  • Easy installation: the bolt-on design makes it super easy to fasten to your exhaust pipe with M10 Wrench, no drilling or welding needed.
  • Maintenance tips: please routinely clean off the debris, cement, oil, dust and dirt on the surface or the interior of the exhaust tips since good maintenance ensures a longer service life of ....
Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.
Check Stock

Performance Stainless Steel SS SS409 3" Dual Axle Back Exhaust No Muffler System Kit Polished Tips Compatible With 15-18 Dodge Charger SRT Hellcat R/T Scat 392 6.2L 6.4L V8

  • Retain All OEM Catalytic Converters. Does NOT Modify Any Vehicle Emission Component. Fully Emission Legal Exhaust System.
  • Fit: 2015-2020 Dodge Charger SRT Hellcat 6.2L & Scat Pack/392 6.4L V8 (Excludes All 5.7L V8 Model).
  • High Performance Dual Axle Back Exhaust System With Polished Tips. Very Aggressive & Deep Muscular Exhaust Sound.
  • Hardware(s) Included Exactly As Shown. Improve Sound, HP/TQ & Throttle Response. TIG Weld & Mandrel-Bent For Maximum Performance.
  • Top Quality SS409 Stainless Steel. Affordable Pricing. Instruction Not Included. Professional Installation Strongly Recommended.
Check Stock