Top Exhaust System Gaskets Reviews

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

PitVisit Exhaust Manifold to Cylinder Head Gasket Compatible with Subaru WRX STI LGT FXT Multi-Layer Steel with Stainless Steel Fire-Rings Pair

  • Produced with multi-layered steel (MLS) and a 304 stainless steel fire-ring, this gasket can withstand high temperatures and prevent exhaust leaks..
  • PitVisit's heavy duty exhaust mainfold to cylinder head gaskets meets or exceeds OEM gasket standards..
  • Compatible with Subaru, Cobb, Invidia, Tomei and other aftermarket system and components..
  • Upgrade or replace worn out exhaust gaskets for a leak-free seal to ensure optimal performance on your vehicle..
Check Stock

Compatible with Kawasaki Z650 KZ650 4-1 Exhaust System Stainless Classic Muffler 76 77 78 79 80

  • The megaphone style stainless steel muffler features a two-way removable cartridge baffle system. The muffler can produce three different exhaust sounds: a discreet street legal rumble fully assembled, a crisp note with the primary baffle removed, or an open megaphone drag style roar and performance to match with the cartridge fully removed!.
  • This set includes all necessary hardware to mount the muffler onto the engine. Gaskets are included..
  • No rejetting is required after fitment on a stock bike however we always recommend a dyno test. Old bikes can be a bit particular, jetting may be required if the bike has previously been tuned away from stock or other modifications have been installed..
  • This complete classic exhaust system utilizes high quality polished stainless steel throughout, resulting in a stunning yet durable complete exhaust system..
Check Stock

Neeknn Moto Short Performance Exhaust Muffler Pipe Black Steel For GY6 150cc 4 Stroke Scooter, E38DXK-BK

  • GY6 150cc Performance Shorty Exhaust System.
  • This is a Complete Performance Exhaust System Including Head Pipe Performance Muffler with Gaskets and Mounting Hardware.
Check Stock

Neeknn Moto Short Performance Exhaust Muffler Pipe Red Steel For GY6 150cc 4 Stroke Scooter (E44DXK-RD)

  • GY6 150cc Performance Shorty Exhaust System.
  • This is a Complete Performance Exhaust System Including Head Pipe Performance Muffler with Gaskets and Mounting Hardware.
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 JDM Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

Caltric compatible with Exhaust Muffler W/Gasket Polaris Rzr 800 Efi 2008 2009 2010 2011

  • Fitment: Work with 1984-present Big Twin models new spherical exhaust port.
  • Harley 1984-2016 / 1986-2016 Sportster XL / Will not work with Harley V-ROD..
  • Made from Stainless Steel and solid. These new exhaust gaskets design to replace stock exhaust with aftermarket pipes when require..
  • Steel Mesh Style Crush Seal can provide a nice tight seal for an exhaust install. Replace Harley OEM Part Number: 65324-83B..
  • Easy to install and OEM perfect fit. These gaskets just slid in the exhaust port and sit there all fine when you try to assemble the exhausts..
  • Package Included: 1x Pair of Gasket Seal..
Check Stock

Tsudo 08 09 10 11 Lancer De/Es/GTS N1 Titanium Tip Axleback Exhaust V2

  • Manufactured from T304 / SUS304 stainless steel for durability and high corrosion resistance.
  • CNC machine mandrel-bent stainless steel tubing for maximum exhaust flow.
  • Significant weight reduction compared to OEM exhaust system.
  • Improves horsepower, torque, throttle response, and fuel mileage.
  • Includes all necessary hardware (bolts and gaskets) for Bolt-on installation with typical hand tools.
Check Stock

Small Block Chevy Hugger Tight Fit Headers, Raw Finish

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-1/2" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • Raw steel finish allows you to paint or ceramic coat to your choice of color.
  • Round exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock