Top Exhaust Mounting Strap Reviews

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

  • The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
  • Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
  • The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
  • The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
  • The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..
Check Stock

MaxxAir IF24UPS IF24 Powerful Industrial Exhaust Fan 24-Inch

  • INDUSTRIAL EXHAUST FAN: This MaxxAir 24" Industrial Exhaust Fan is a powerful fan that can be used in garages, barns, greenhouses, and a variety of....
  • THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy....
  • EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It....
  • HEAVU DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges....
  • EXHAUST FAN WARRANTY: This heavy duty exhaust fan has 1 year limited warranty. The shutters open and close automatically. Fans do not come with....
Check Stock

Reese Towpower 8339 Fold-Down Gooseneck Hitch Platform

  • Takes only seconds to raise or lower the ball into position.
  • Forged, heat-treated 2-5/16" chrome ball standard.
  • Includes mounting hardware and integrated drop down spring loaded safety chain loops.
  • Platform and the ball are rated for 25,000 lbs. GTW and 6,250 lbs. vertical load.
  • Designed to allow unrestricted use of the truck bed.
  • Requires no alteration of factory exhaust systems.
  • Fold-down design allows unrestricted use of the truck bed when not towing.
Check Stock

BEYST Bicycle Exhaust Sound System,Bike Turbo Exhaust Pipe with Sound Effect Motorcycle Noise Maker Cycling Accessories 35 x 7.5 cm(as The Picture)

  • bike sound noise maker bicycle motorcycle sound exhaust system turbo motorcycle toys cycling noisemaker.
  • Each turbos pike comes with three sound cards tuneable for up to six different bike sounds.
  • Bicycle exhaust system not only looks like with the genuine motorcycle exhaust pipes, The best thing is when you start riding, the sound from the exhaust pipe, really like a Motorcycle.
  • The exhaust pipe attaches to the rear frame of the bicycle with a mounting bracket,Plastic sound card between the base of the exhaust and the spokes create a loud motorbike noise.
  • Re-designed exhaust pipe is stronger,more durable,almost unbreakable and virtually scratchproof..
Check Stock

28mm Exhaust Muffler Silencer Pipe Assembly for CRF50 XR50 GY6 70cc 110cc 125cc SSR SR110 Rocketa Taotao DB14 DB10 xpro DB-x20 SDG Coolster Pit Dirt Bike Motocross - Red

  • 【Wide Applicability】The exhaust system fits CRF50 XR50 CRF50F, and their copies 70cc-125cc bikes from China, such as SSR, YCF, IMR, Atomik, x-pro, Baja, Motovox, TTR, Thumpstar, BSE, Kayo, Stomp, Piranha, DHZ, GPX, Pitster Pro, SDG, Braaap, Taotao, Coolster, Roketa, Lifan, YX, ect.
  • 【Precisely Designed】Corrosion resistant chrome plated, steel exhaust pipe is precisely bent to fit your vehicles spacing and engine output requirements.
  • 【Upgraded Material】Integrated ventilated scald guard helps prevent burns in areas where rider’s legs may contact the exhaust pipe.
  • 【Superb Heatproof Coating】The exterior is finished with premium paint that withstands high temperatures well. The paint won't easily peel off so your dirt bike exhaust will look like new for a long time.
  • 【Complete Kit】The package includes 1 x muffler, 1 x chrome plated steel exhaust pipe, 1 x aluminum mounting clamp, 1 x stainless steel mounting bolt, 1 x corrosion resistant painted lock nut, 2 x stainless steel lock nuts, 2 x copper compression header gaskets.
Check Stock

Powerful Industrial Exhaust and Ventilation Fan 18 Inch

  • HEAVY DUTY EXHAUST FAN: The housing is made of galvanized steel which prevents rust and has pre-drilled holes for easy mounting. Rolled flange edges....
  • MULTI USE VENTILATION FAN: Perfect for agriculture, industrial, restaurant, school, gym, or home..
  • EXHAUST FAN WITH SHUTTER: The exterior shutters close tightly to prevent a draft when not in operation and open automatically when powered on. It....
  • EXHAUST FAN WARRANTY: This heavy duty exhaust fan has a 1 year limited warranty. The shutters open and close automatically. Fans do not come with....
  • THERMALLY PROTECTED FAN: The fan has 2 OSHA-compliant features including a safety grille and a fully enclosed, thermally protected, PSC energy....
Check Stock

Vance & Hines Replacement Baffle for Straightshot Performance Exhaust Systems 21877

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

Builders Edge 140137079001 Scallop Exhaust Ventilator, 4 in, Arctic, 001, White

  • The Builders Edge Scalloped Exhaust Vent exhaust vent for side walls with patented exhaust flaps which stay closed when not in use.
  • Mounting blocks are durable, maintenance-free, UV stabilized and constructed with color molded-through so they won't scratch, flake, or fade.
  • Our patented Snap-On Trim Ring makes installation easy.
Check Stock

Broan-NuTone AER80LWH Bath Fan, Medium, White

  • NOTICE!!! Panel Size: 9.8 x 9.8 inches/ 25 x 25 cm (L x W), Mounting Hole Size: 8.07 x 8.07 Inches/ 20.5 x 20.5 cm (L x W), Duct Diameter: Ø4.0 inches/ Ø10 cm. Confirm the size before purchasing, and the product is directly fixed to the dropping ceiling by screws..
  • Fan and LED Light Installation: The fan function has three wires, according to the color Black: L, White: N, Green: ground wire. The light function has two wires, Brown: L and Blue: N. You can control both functions individually or separately..
  • Bathroom Fan with Light: This 110 CFM exhaust fan can effectively control the air quality in the bathroom, and it is very quiet when the 1.0 sones powerful exhaust is running. Power: 30W, Voltage: 110V, 6500W LED light. (The LED light wire needs to be connected to the switch separately.).
  • Sturdy Material: The casing and fan blades are made of high-quality ABS plastic, which is sturdy and durable and has a long service life. High quality, Durable, built-in copper motor with thermal protection, can work continuously without maintenance..
  • Outstanding Performance: This bathroom exhaust motor is independently developed by us, which can quickly and effectively reduce the humidity in the bathroom air, which is very suitable for the bathroom/office/home/laund....
Check Stock

EVIL ENERGY 2.25' 2 1/4 Lap Joint Exhaust Band Clamp Exhaust Repair Preformed 304 Stainless Steel 2pcs

  • Joins 2.25 inch OD Pipe to 2.25 inch ID Pipe. Lap joint exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, muffler and catalytic converters. Width of strap: 2.94inch (74.8mm). Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection, preferably with compression slit. This lap joint clamp commonly to join different size pipe..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion..
  • Material: 304 stainless steel strap, zinc-plated flange bolt and nut, steel gasket, aluminum alloy I-block. Lap Joint band clamp requires that the sections being clamped have sufficient lengths of straight pipe leading into it. It is removable and reusable, easy to install without welding..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

Air King ASLC50 Advantage Exhaust Bath Fan with Light, White Finish

  • ...ation by using the included adjustable hanging brackets..
  • Chic and unobtrusive grill comes with polycarbonate light lens that makes for easy re-lamping, and can be used with 100-watt maximum type A19 medium base incandescent bulb (not included)|Can be installed in two easy ways: installation via double-thick keyhole mounting tabs or the included adjustable hanging brackets|.
  • Specifications: HVI Certified CFM : @ .10 SP: 50 HVI Certified Sones : @ .10 SP: 3.0 Sound Level : Moderate ASHRAE 62.2 Ventilation : Local Exhaust Light Lens : Plastic Main Lighting : 100 Watts Duct Size :.
  • Specifications:4" round Collar/Damper : Plastic Mounting : Included hanger bars Effective Ventilation : Bathrooms up to 45 sq. ft., Other rooms up to 60 sq. ft..
  • Bath fan with light designed to bring style to your home.
  • 50-CFM blower at 3.0-sone for quiet operation.
  • Exhaust capacity for rooms of approximately 45 to 60-square feet.
  • Easily installation by using the included adjustable hanging brackets.
Check Stock

YHMTIVTU 2.1\ Quiet Baffle Exhaust Pipe Muffler Silencer Universal Fit for Motorcycles 1 Pair

  • Typically Reduce Sound Output by 2-3 db,Nice Aftermarket Replacement.
  • Dimension:7.75*2.1 Inch (Length*OD*),Pls Confirm the Inner Diameter of your Exhaust Pipe before Purchasing, Note: Not Fit for 2009 FXSTSSE.This Quiet Baffle is Hand-made and Wrapped in the Middle Part,pls Allow Minor Differences of the Measurement.
  • Quiet Baffle is Wraped by Silencer Cotton+Aluminum Foil ,it can be directly used on your bike,No Mounting Bolts Included.
  • Notes: It is recommended that new exhaust gaskets and a proper jet kit be installed when changing an exhaust system on a carburated motorcycle, or new exhaust gaskets and a digital fuel processor when changing an exhaust system on a fuel-injected motorcycle. Discoloration (bluing) is caused by tuning characteristics, like cam timing, carb jetting, etc., and is not caused by defective manufacturing..
Check Stock

DPHXF 24mm/0.94 inch Exhaust Pipe Muffler Silencer Diesel Heater Propex Propane Heaters，Pipe Bend Design for Effective Sound Reduction.

  • Scope of application: The exhaust muffler silencer is suitable for Ebespacher heater, Eberspacher Airtronic D2, Eberspacher Airtronic D4, Eberspacher....
  • Reliability: The exhaust pipe is free to expand and contract during operation and shutdown, and the installation of the muffler will not cause....
  • Material: The exhaust pipe muffler is made of high quality stainless steel with high heat and corrosion resistance, which is economical and durable.....
  • Easy to install: 24mm stainless steel silencer with 2 thickened clamps, 1 mounting bracket and 3 screws. This exhaust silencer is easy to install and....
  • Professionalism:Diesel heater exhaust muffler with double welding structure is strong, internal bend design, good noise reduction effect, and long....
Check Stock