Top Exhaust Manifold Flange Repair Kit Reviews

Exhaust Manifold Bolt Repair Kit Compatible with 1999 & Newer GM Trucks and SUV's With a 4.8L, 5.3L, 6.0L & 6.2L LS Engines (Driver Front/Passenger Side-Rear)

  • ... 【Special Tips】2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. If you have a 6.0L engine in your vehicle it will fit 100% (1999 and newer) as there is only one manifold style for the 6.0L engine..
  • 【Function and Role 】Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts. Stops exhaust leaks that occur between the exhaust manifold and the cylinder head. Make your driving quieter..
  • 【High-Quality Materials】 Exhaust manifold repair brackets made of High quality carbon steel, up to OEM standard.TIG welding for durablity and long service time.exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • 【After-sales service】Confidence originates from quality! We promise to provide one free return/exchange within 30 days. Provide customers with a truly risk-free shopping experience. If you have any problem, feel free to contact us..
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with 4.8 5.3 5.7 6.0 6.2 LS1 LS2 LS3 LS6 Chevy LSX Camaro, Corvette, Trans am, GTO, G8, CTS V, GM Trucks

  • This Exhaust Manifold Bolt Repair Kit was used to repair Driver's Side Rear and Passenger Side Front. We also selling Driver's Side Front and Passenger Side Rear. You can buy it at my store..
  • The Exhaust Manifold Bolt Repair Bracket will Eliminate exhaust noise and repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts! Save your time and money..
  • Manufactured from high-quality Steel, TIG welding. For durablity and long service time. Kits comes with necessary block, bolts and washers for solid repair..
  • The Exhaust Manifold Bolt Repair Kit Compatible with L20, L31, L33, L59, L76, L77, L83, L86, L8T,L92, L94, L96, L98, L99, L9H, LC9, LFA, LH6, LH8, LM4, LM7, LMG, LQ4, LQ9, LR4,LS1, LS2, LS3, LS4, LS6, LS7, LS9, LSA, LSX376, LSX454, LSX454R, LT1, LT2, LT4,LT5, LY2, LY5, LY6, LZ1.(Fits for GM Vehicles, Silverado, Sierra, Yukon, Denali, Escalade, Hummer ).
  • If any issues from our products arise please don’t hesitate to contact us. We guarantee the quality of our tools and want to ensure you’re only getting the best. B....
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

  • Pipes Have Been Upgraded To Stainless Steel.
  • Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
  • Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
  • Included heat shield, Includes flex bellows.
  • Replace Part Number: 33007072, 4883385, 674-196, 10105812.
  • Replacement For Jeep Cherokee L6 4.0L 1991-1999.
  • Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
  • Replacement For Jeep Grand Cherokee L6 4.0L....
  • Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
Check Stock

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

Dsnaduo 4 SETS Spring Bolt Stud & Nut Hardware Repair Replacement Kit/Exhaust Flange Hardware Kit (Golden) M10x1.25

  • 4 PCS Exhaust Manifold Bolt and Spring Kit / Exhaust Flange Hardware Kit.
  • Designed to support undercar exhaust components.
  • Engineered from premium materials to provide exceptional service life and reliability.
Check Stock

MBRP Exhaust S5001409 Muffler Bypass Fits 14-21 Compatible with/Replacement for Sierra 1500 Silverado 1500

  • ...EASE NOTE ON 2013 AND NEWER 4.8L, 5.3L OR 6.2L ENGINES ONLY, this will fit these motor sizes in years 2013 and newer if the oil dipstick tube is located on the passenger side of your vehicle. and it will fit any year 1999 to current models if you have a 6.0L engine in your vehicle because there is only one style of manifold for the 6.0L engine.
  • ▲ - 100% brand new and high quality, It is easy to install and uses high-quality materials that meet or exceed OEM standards. Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • ▲ - The Exhaust Manifold Bolt Repair Bracket is to stop exhaust leaks that occur between the exhaust manifold and the cylinder head..
  • ▲ - If you have any questions, please feel free to contact us, we will serve you wholeheartedly. If you're not 100% satisfied with our tools, simply return it for a full refund in 30 days..
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock