Top Exhaust Manifold Expansion Plug Reviews

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

  • Pipes Have Been Upgraded To Stainless Steel.
  • Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
  • Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
  • Included heat shield, Includes flex bellows.
  • Replace Part Number: 33007072, 4883385, 674-196, 10105812.
  • Replacement For Jeep Cherokee L6 4.0L 1991-1999.
  • Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
  • Replacement For Jeep Grand Cherokee L6 4.0L....
  • Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

GPP Exhaust Manifold Kit Set Compatible with 1999.5-2003 Ford 7.3L Powerstroke Diesel

  • (2) Studs (manifold to exhaust pipe flange).
  • (2) Nuts (manifold to exhaust pipe flange).
  • Interchange P/N: F81Z9431AA, F81Z 9431 AA, F81Z9430AA, F81Z 9430 AA.
Check Stock

A-Premium Left Exhaust Manifold Kit with Gasket Compatible with Nissan Frontier 2005-2019 Pathfinder 2005-2012 NV1500 NV2500 NV3500 2012-2021 Xterra 4.0L

  • 【Vehicle Fitment】This Exhaust Manifold Kit is Compatible with Nissan Frontier 2005-2019, NV1500/NV2500/NV3500 2012-2021, Pathfinder 2005-2012, Xterra 2005-2015---V6 4.0L.
  • 【Durable Construction】This exhaust manifold set is made of solid metal which can resist heat, cold, warping and corrosion, and restore engine proper operation.
  • 【Reference Number】The A-Premium Exhaust Manifold Kit's reference number: 674-947, 674947, 14002EA210, 14002EA21A. Before placing an order, verify that the part is compatible with your vehicle using the compatibility system..
  • 【Customer Support】1 Year Unlimited-mileage Quality Guarantee.
  • With being sturdy and brand-new, this exhaust long tube headers is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..
Check Stock

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

GLM Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 Engines 1983-2002 Replaces Part Numbers 99745 99746 99746A8 99746A17

  • Cast Iron Exhaust Manifold for Mercruiser 4.3 V6 engines from 1983 to 2002. Replaces MerCruiser part numbers 99745, 99746, 99746A8, 99746A17.
  • Includes gaskets, plugs, drain elbow, and blue drain plug. Left and right are the same. Does not fit newer dry-joint manifolds (2002 and newer).
  • 100% Leak Tested. Uniform wall thickness. Clean exhaust passages. Shot peened for smooth external finish. All mounting surfaces CNC machined to....
  • GLM Marine, has catapulted to the forefront in manifold technology by incorporating improvements in design, manufacturing, quality assurance, fault....
  • For over 32 years now, GLM has committed itself to producing high quality and cost effective aftermarket marine products. From superior quality....
Check Stock

PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit Compatible with Ford 1999-2003 7.3L 679-005 F-250 F-350 Super Duty

  • PowerStroke Turbo Diesel Exhaust Manifold Bellowed Up Pipes Kit  ---Replace the factory exhaust feed system (exhaust manifold to the turbocharger)....
  • Turbocharger Up Pipe Kit Works fit for Ford 7.3L powerstroke turbo V8 diesel models only! Such as: 1999 2000 2001 2002 2003( for Ford )F-250 Super....
  • Function - Direct replacement, Turbocharger Up Pipe Kit replaces the vehicle's factory installed exhaust manifold,Rust-resistant for long-lasting....
  • OE#:  679-005,F4TZ6K854C, F4TZ6K854F, F81Z6K854EA, F81Z6K854FA, F81Z6N632AA, F8TZ6K854AA.
  • include - 1 x Set of Turbo Diesel Exhaust Up Pipe All....
  • IMPORTANT NOTE - This Turbocharger Up Pipe Kit is designed to replace an original Turbocharger Up Pipe Kit with these exact options. If you do not....
Check Stock

(2) GLM Mercruiser Exhaust wet joint manifolds compatible with GM 4.3L V6 (CAST IRON) | GLM : 51220; Mercury Part Number: 99746A17 (Pair of (2) Manifolds)

  • New Exhaust Manifold Catalytic Converter & Includes Free Gasket and Bolts.
  • Fits Nissan Altima 2.5L 2002 - 2003 - 2004 - 2005 - 2007.
  • Includes everything in the photos. Please compare your parts to ensure exact fitment. Not certified for sale in California but will pass CA smog..
  • NOTE: This Manifold also includes a plug for the reason That some manifolds only use one sensor. This is used to plug the other hole..
  • Replaces Dorman Part Number: 674-659, OE Part Numbers: 140028J008 140029J360 140029J305.
Check Stock

Exhaust Manifold Repair Driver Rear & Passenger Exhaust Manifold Bolt Repair Kit Compatible with?Newer GM Trucks And SUV 4.8 Liter 5.3 Liter 6.2 L 1999-2013, 6.0 L 1999-2021

  • Compatible With: For GM Trucks & SUV's 1999 & newer models（Include Chevrolet Silverado, GMC Sierra / Yukon / Denali, Escalade, Hummer).
  • Package Include: Driver & Passenger Exhaust Manifold Bolt..
  • Functional: Repair the driver side rear passenger rear broken exhaust manifold bolts, prevent exhaust leaks that take place between the exhaust manifold and the cylinder head.
  • Easy to install: Without removing the cylinder head or drill out and replace the broken end bolts.
  • Warranty: If the received product is deformed or beat up please contact us by message, we will provide warranty service for damaged products, true worry-free shopping experience.
Check Stock

OTC 6982PMC Professional Mechanics Collet Set for Removing Frozen or Correded Studs and Broken Bolts

  • OTC's Professional Mechanics Collet is designed to securely grasp broken studs with as little as 1/4 inch exposed, including corroded or frozen exhaust manifold studs.
  • Compact design lets this versatile tool get into tough to reach spots for extraction -in an around suspension and steering components, tight exhaust manifold clearances and more.
  • Designed to draw tight - within 1/16 inch of head surface to ensure a secure and stable attachment that greatly reduces tipping.
  • Kit includes 4 collets (6mm, 7mm, 8mm, 10mm) sized to fit common applications including exhaust manifold studs, broken head bolts, and other engine and chassis fasteners.
  • Durable blow-molded storage case keeps tools contained and organized so they are ready when you need them.
Check Stock

Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511

  • 【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
  • 【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
  • 【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
  • For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
  • 【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
  • 【Package includes】2 exhaust manifold gasket, 3 Exhaust Gasket Seal, 9 Exhaust Spring.
Check Stock