Top Exhaust Machine Reviews

Automotive Smoke Machine Cone Adapter Leak Detector for Exhaust and Intake Diagnostics

【Widely Used Adapter】Make leak testing with a smoke machine a whole lot easier! It's designed to fit even large intakes on V8 vehicles..
【How Does it Work?】Fit the cone into diagnostic site (such as the intake boot/duct or exhaust tailpipe) and inject smoke with a smoke machine to....
【NEW LARGER SIZE!】Will fit almost all exhaust tips and intake boots. Made for larger openings with a diameter up to 4.2 inches (107mm) and as....
【Compatibility】Works with ALL Automotive Smoke Machines such as OTC, Redline, Autool, AutoLine Pro.
【Ultra-durable construction & Superior Fitment】LIFETIME WARRANTY.

Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.

Check Stock

Edelbrock 60779 Performer RPM Cylinder Head

63cc combustion chamber along with a 171cc intake port.
High-flow 2. 02" intake valve and 1. 60 exhaust valve.
Includes phosphor-bronze valve guides, interlocking ductile iron valve seats.
Intake and exhaust runners are CNC-machine profiled for superior flow and performance.
Improved power throughout the RPM range for greater throttle response and top-end horsepower.

Check Stock

Truck Exhaust Kits - Shop Line dual exhaust system 2.5 AL pipe 2 chamber Muffler 2.5" Black Slash Cut Weld on Tip

Vehicle Compatibility - This cat-back exhaust is compatible with Honda Civic Coupe Sedan 1992-1995, Honda Civic EX 1996-2000, does NOT fit hatchback models..
Brilliant Performance - Come with [1] high performance racing design exit cat-back exhaust kit, can increase 15 to 25 horsepower instantly or low end torque and maximize to enhance the exhaust gas flow without sacrificing the aggressive tone sound in the smooth conditions..
Extraordinary Quality - It is constructed of high quality aluminized steel with computerized mandrel-bends for the strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion..
Simple Installation - Easy for the installation, make you enjoy the best performance in the fastest time..
Product Specification - Major Piping: 2.5" OD | Muffler Exhaust Tip (Removable Silencer Included): 4.5" OD | Inlet: 2.25" OD | Muffler Tip Type: Round.

Check Stock

S SIZVER Weld-On Muffler Series 4" Carbon Fiber Slant Tip 3" Inlet+Silencer

【FITMENT】Compatible with 92-00 Honda Civic Coupe/Sedan.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-WRX02 Cat Back Exhaust System [Compatible with 02-07 Subaru Impreza WRX/WRX STI]

【FITMENT】Compatible with 02-07 Subaru Impreza WRX/ WRX STI.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion..
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

J2 Engineering J2-CBE-035 Cat Back Exhaust System [Compatible with 90-99 Mazda Miata]

【FITMENT】Compatible with 1990-1999 Mazda Miata.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 – 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】Muffler tip type: rounded tip. Tip diameter (in): 4.5″. inlet/ outlet size (in): 2.25″. silencer included.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-HP92-NRT Cat Back Exhaust System [Compatible with 92-96 Honda Prelude]

【FITMENT】Compatible with 92-96 Honda Prelude.
【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】4"(Od) rolled Muffler tip/ 3"(od) inlet/ 14mm thick double walled tips.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-NM00-NRT Stainless Steel Cat Back Exhaust System [Compatible with 00-03 Nissan Maxima]

【FITMENT】Compatible with 2000-2003 Nissan Maxima.
【Quality Construction】Made of 16-Gauge Aluminized Steel for Increased Performance to Value. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】4" OD Sized Piping, 5" OD Polished Round Slant Rolled Muffler Tip.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

4 inches Round Muffler Rolled Tip Catback Exhaust System Compatible with Silverado Sierra 1500 4.3L 5.3L Extended Crew Cab 14-19, Stainless Steel

▶️ This cat-back exhaust is compatible with Chevrolet Silverado 1500 2014-2018, Chevrolet Silverado 1500 LD 2019, GMC Sierra 1500 2014-2018, GMC Sierra 1500 Limited 2019, fits with 4.3L 5.3L extended and crew cab models, does NOT fit 2WD crew cab models with 2pc drive shaft..
▶️ Come with [1] high performance racing design dual exit cat-back exhaust, it can maximize to enhance the high exhaust air flow rate without sacrificing the attractive power sound in the smoothest conditions..
▶️ Made of high quality stainless steel with computerized mandrel-bends for strength and durability, and the TIG welded CNC machine can resistant against pressure and corrosion. All those material can guarantee the reliable performance in any circumstance..
▶️ Easily for the installation, can make you enjoy the best performance in the fastest time..
▶️ Major Piping: 3" OD | Muffler Exhaust Tip: 4" OD | Inlet: 3" OD | Outlet: 2.5" OD | Round Diagonal Cut Rolled Tips.

Check Stock

DNA MOTORING CBE-CCOL04-28L Stainless Steel Cat Back Exhaust System [Compatible with 04-12 Chevy Colorado]

【FITMENT】Compatible with 04-12 Chevy Colorado.
【Quality Construction】Made of high quality t-409 Stainless Steel with computerized mandrel-bends for strength and durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】2.5" OD mm inlet/ 2.5" OD mm main piping.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

DNA MOTORING CBE-NTT07-56L Stainless Steel Cat Back Exhaust System [Compatible with 04-15 Nissan Titan]

【FITMENT】Compatible with 04-15 Nissan Titan.
【Quality Construction】Made of high quality aluminized Steel with computerized mandrel-bends for strength and durability. TIG welded CNC machine flange for resistance against pressure and corrosion..
【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency..
【Muffler & Diameter】Piping inlet size: 3" ID.
【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound..

Check Stock

NEWTRY Pneumatic Hole Puncher 5mm Air Metal Hole Punch Tool Industrial Sheet Metal Punching Gun Heavy Duty Metal Hole Flange Opener for Doors & Windows, Factory, Office and Home

...inuously please press the button longer..
▷ [WIDE RANGE OF APPLICATION]---This type of industrial air hole punching machine has a wide range of uses, which can be used for office decoration, shop christmas decoration, installation engineering, door and window drainage, door and window furniture punching, etc..
▷ [EXHAUST MUFFLER PORT & 360° ROTATING PUINCH]---Inlet size: 1/4".
the perforated gun body has an exhaust muffler, which can reduce the exhaust noise of the punch and provide you with more comfort work environment, but it is still recommended to wear headphones to protect your ears when using it. The punch of the air punch can be rotated 360°at any angle, The firing pin is forged from a special alloy steel material, which is durable and has sharp impact..
▷[PARAMETER RANGE]---This metal punching airtool is suitable for stainless steel, iron, aluminum and other metal materials. The recommended thickness: stainless steel≤1.0mm.
the machine shearing force can reach 708kg/1557lbs. The striker is forged from high-strength alloy steel and can be stamped instantly..
▷ [PRECAUTIONS]---Please note that the firing pin is a consumable, so it is recommended to be replaced after a period of use, and this type of door and win....

Check Stock