Top Exhaust Installation Kits Reviews

Mid Valley - 3'OD DIY Custom Exhaust Tubing Mandrel Bend Pipe Straight & U-bend Kit Set of 16

  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end to allow easy installation..
  • Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • Package Included 4 x 48″ Straight Pipes 4 x 90 Degree Pipes 4 x 45 Degree Pipes 4 x 180 Degree U-Bends As our pics shown.
Check Stock

FEL-PRO VS 50442 R Valve Cover Gasket Set

  • Check Before Purchasing - Please check the description or use the year/make/model drop down bar and interchange part numbers to confirm the compatibility before purchasing. If you don't make sure whether this ENGINE GASKET KIT fit for your vehicles, please message us. More details as below.
  • Installation instruction is not included, refer to the online installation steps will work, professional installation is highly recommended..
Check Stock

Krator 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48" Straight, 90 Degree, 45 Degree, 180 Degree U-Bends Pipes

  • 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit.
  • These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
  • Each pipe is expanded on one end to allow easy installation..
Check Stock

BRExhaust Stock Replacement Exhaust Kit For Mazda Miata MX-5 MX5 NA 1990 1991 1992 1993 1994 1995 - BRExhaust 106-0246 New

  • Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension..
  • Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation.
  • Leaves all emissions equipment intact, making it 50-state emissions compliant.
  • Fits 1990-1995 Mazda MX-5 Miata (chassis code NA).
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

Flanged Hex Head Bolts, Flange Bolts, Exhaust Manifold Bolt Kit M10X1.5-35mm 6-Pack

  • Aftermarket 03423 Exhaust Manifold Hardware Kit.
  • Stainless Steel construction provides strength and offers good.
  • The bolt kits are ideal for securing exhaust components and eliminating exhaust leaks.
  • Fits some Toyota,BWM,Lexus,Chevrolet models.Please check the size before purchasing.
Check Stock

3 Inches OD DIY Custom Exhaust Pipe Kit 16-Piecese Straight & 45/90 Degree & U-Bends

  • ▶️ These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it. Each pipe is expanded on one end....
  • ▶️ Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability.
  • ▶️ i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • ▶️ Slip Fit Joints to Provide Easiest Fabrication.
  • ▶️ 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3" OD.
Check Stock

Floshine 8PCS DIY Stainless Steel 3 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 3.0 Inch Exhaust System…

  • DIY Exhaust System–Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality–Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit– 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation–Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment–Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 3.0 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

Ingersoll Rand 308B Air Straight Die Grinder, 1/4\

  • POWER: Motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed..
  • Piped Away Exhaust Ready: These die grinders are compatible with “piped away” exhaust kits, so you can transfer exhaust away from you and your workspace..
  • DURABLE: Ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • RELIABILITY: Integral safety-lock throttle lever prevents accidental start up..
  • LIGHTWEIGHT: At only 1lb., the ergonomic composite housing protects this tool from cold air and offers greater operator comfort..
  • Built-in lubricating wick increases angle gear life.
  • Rear exhaust directs air away from the operator.
  • Powerful motor delivers 0.33 HP (0.25 kW) and 25,000 rpm free speed.
  • Durable ball-bearing construction improves balance, reduces vibration, and ensures a longer life.
  • Strong aluminum housing withstands tough operating conditions.
  • Small and lightweight design provides easy operation greater access to tight spots.
  • Easy-to-use, integral safety-lock throttle lever prevents accidental start up.
Check Stock

Floshine 8PCS DIY Stainless Steel 2.25 Exhaust Pipe Kit,Including Mandrel Bend Pipe & U-Bend & Straight Pipe，Universal Fit 2.25 Inch Exhaust System

  • DIY Exhaust System--Four types of pipes totaling 16 pipes to meet your exhaust system renovation plans.
  • High-quality--Rust-proof steel and computerized mandrel bends deliver high strength and greater durability, and factory custom manufacturing provides stability and longer service life..
  • Products in the kit-- 2 pcs 90°Pipes, 2 pcs straight pipe exhaust kit, 2 pcs 135°Pipes， 2 pcs 180° U-Bends.
  • Easy to installation--Each pipe is extended in diameter at one end to facilitate sliding installation of different pipes.Installation can be done with clamps or by welding.
  • Fitment--Exhaust Pipe Bender Universal fit for modifying the exhaust pipe for the 2.5 inch exhaust system, 16 pipes can be interconnected and cut to create your own exhaust system.
Check Stock

ECOTRIC Gooseneck Trailer Hitch System Complete Underbed Kit Compatible with 1999-2016 Ford F250 F350

  • Compatible with 1999-2016 Ford F-250 & F-350 SUPER DUTY PICKUPS ONLY, WILL NOT FIT CAB & CHASSIS. Custom-fit under-bed mounting system..
  • Features: Allows full use of pick-up bed area when hauling cargo. Accommodates all standard vehicle suspensions with no alteration of OE exhaust systems. Rail kits are rated to match manufacturer's vehicle weight rating..
  • Specification: 2-5/16" high strength chrome plated ball standard, 3" ball optional. Rated for 30,000 lbs. gross trailer weight and 7,500 lbs. vertical load, tested to 30,000 lbs. gross vehicle weight rating. Weight Carrying: 7,500 lbs. (TW/GTW). Weight Distributing: 30,000 lbs. (TW/GTW).
  • Installation: Package includes all the hardware parts and instructions. Spring loaded safety chain loops included. Professional assembly is highly recommended..
  • Best Service: Provide technical support at any time.Please feel free to tell us what we can do for you,we will reply in one business day. 100% Customer Satisfaction Guaranteed from Order Placement through Installation..
Check Stock

HOW I FORGOT AND OVERCAME BROKEN HEART

  • Material：Made of stainless steel, anti-corrosive and durable,Exhaust tip surface polishing + color plating, exquisite workmanship, shiny bright and cool color of stainless steel electroplating process, can provide a smooth appearance for your car exhaust..
  • Installation：Exhaust silencers do not require replacement parts, no welding, no drilling, no professional installation, just fix the screws to the appropriate position of the exhaust pipe, which is a perfect replacement for old parts..
  • Features：After installation, it will enhance the hierarchy sense of your vehicles, full of elegant style,They Decorate the appearance of your car, make your car look new, and increase the style and sports effects, it is very suitable for your car..
  • DIY: Ideal car DIY, perfect substitute. The heart-shaped tail throat can also be given as a gift to family and friends. I believe it will bring surprises..
  • Compatibility：tailpipes are suitable for exhaust pipes with a diameter of 4cm-6.0cm / 1.57inch-2.36inch.Please measure the diameter of your pipe before buying..
Check Stock

3'' Custom Exhaust Kit Universal Mild Steel 16PCS Tubing Mandrel Bend Pipe Straight & U-Bend (2 PACKAGES SHIPPING))

  • Specification: 16-Gauge Piping Walls, Inlet / Outlet Size (IN) : 3″ OD.
  • Easy To Use: Slip Fit Joints to Provide Easiest Fabrication.
  • Universal Kit: 4 pcs 48″ Straight Pipes, 4 pcs 90 Degree Pipes, 4 pcs 45 Degree Pipes, 4 pcs 180 Degree U-Bends.
  • Sturdy Structure: Made of High Quality Mild Steel with Computerized Mandrel-Bends for Strength and Durability, i.e. Maximizing Smoothest High Exhaust Air Flow Rate.
  • DIY Custom: These Exhaust Bend Kits Include Enough Tubing To Allow You To Run Your Own Exhaust System The Way You Want It.
Check Stock