Top Exhaust Header Flange Repair Kit Reviews

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

A-Team Performance - Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated - Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver

  • Hex Flange Bolts LS Exhaust Flange Manifold Header Zinc Plated.
  • Compatible with GM Chevrolet Chevy LS1 LS3 LS2 LSX LT Engines 551696 Bolt Kit Only Silver.
  • GM LS / LT Engines (Gen III, IV, V). USA Grade 10.9 with LS Exhaust Manifold Bolts.
  • Zinc-Plated and 350 Header Gasket Set with Bolts.
Check Stock

Custom Header Exhaust Kit Generator Fits HONDA GX390 GO KART MiniBike Drift Trike

  • Custom header exhaust kit for use on Honda GX390 engines. Great start for those that want to construct their own exhaust system for generators, go karts, mini bikes. Kit includes mandrel bent 90 degree 1 1/4" tube with 3.5" radius, cnc cut 1/4" thick flange, and stainless steel replacement mounting hardware..
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Flange Bolts, Quick Fix Exhaust Flange Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless Steel 2002 Tacoma Exhaust Flange Bolts

  • Application: Exhaust spring bolt flange is universal for most vehicles and can repair your car very well and effectively..
  • Standard Specification: Quick fix flange repair pipeline assembly, Exhaust Flange Pipe meets strict quality control standards and can be used reliably..
  • Excellent Quality: Universal Exhaust Flange is made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
  • Easy to Use: Quick Fix Exhaust Flange is easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one..
  • Function: 2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
Check Stock

Remflex 2032 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-1/4 inch width x 1-5/8 inch height Oval Port.
  • Chevy V8 -Small Block 262 - 400, 1-1/4" x 1-5/8" Oval Port, For Raised Weld Bead Headers , 2/Set.
  • additional sealing material is provided around the weld bead to provide a better seal.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex (8053) OBX Exhaust Header Connector Gasket, (Set of 2)

  • 1-3/4 inch pipe, header tube connector flange, 4-into-2/2-into-1.
  • Bolt hole spacing: (A) 4-5/8 inch x (B) 3-1/4 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten the flange bolts.
  • Remflex exhaust gaskets come in a standard 1/8 Inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 Inch.
Check Stock

Remflex 2004 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, ('55 - '00), Round Port, Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1426.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

BLACKHORSE-RACING 3 Inch 76mm Stainless Steel V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipes SS V-Band Flange Kit

  • ▲ 3 INCH STAINLESS STEEL EXHAUST CLAMP KIT – Complete V-band kit is ideal for performance exhaust systems, catback exhausts, turbo back exhausts and more..
  • ▲ COMPLETE 3 PIECE KIT – This complete 3inch Vband kit includes 1x 3″ V-Band clamp which is designed to accommodate the 2x stainless steel 3″ Vband flanges.
  • 1 male flange and 1 female flange. This allows for the flanges to properly align during installation to insure a leak free seal..
  • ▲ DESIGNED FOR 3″ EXHAUST PIPES – This kit is specifically designed for 3″ exhaust pipes. The flanges feature a recessed opening which allows for a 3″ exhaust to easily slip inside the flange, providing a perfect overlap seam for welding..
  • ▲ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES – If you’re making a catback exhaust, turbo back exhaust, mid pipe, or up pipe for your car, truck, or other vehicle this V-band kit is ideal for connecting different pipe sections. Conventional exhaust flanges multiple nuts, bolts, washers and a gasket. A V-band kit eliminates all of these and allows for a connection with a single nut..
  • ▲ EASY ON, EASY OFF – A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust flanges involve multiple ....
Check Stock

Pirate Mfg Chrome Header 6Pt Head 16Pc Bolt Kit Compatible with BB Chevy BBC V8 396-454

  • Dynatech header flanges are of the highest quality for a great start to your exhaust header.
  • 1/4 thick and CNC laser cut for a clean transition from the cylinder head port to the header tube.
  • This is made of mild steel for a strong long-lasting construction.
  • A great exhaust system starts at the beginning - the flange and gaskets.
  • A big Dynatech advantage is the wide selection of port matched flanges.
Check Stock

Remflex 2006 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • 1-3/8 inch width x 1-1/2 inch width Square Port - Matches the Stock cast iron Head Port.
  • Chevy V8 - SB 262, 265, 267, 283, 302, 305, 307, 327, 350, 400, Stock Port, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1404.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
Check Stock

Tight-Fit Small Block Fits Chevy Block Hugger Headers

  • These small block Chevy tight fit headers work well on early hot rods with narrow frame widths due to the slim 4" distance from the flange to outermost point.
  • 1-5/8" primary tubes and 2-1/2" collectors aid in fitting tight clearance applications.
  • These come painted black for corrosion protection prior to use - we suggest stripping the paint and applying your preferred color of high temperature header paint.
  • Oval exhaust ports fit stock small block Chevy heads - will not clear angle plug heads.
  • Come complete with gaskets, header bolts, and 2" reducers to connect to your exhaust system.
Check Stock