Top Exhaust Downpipe Flange Reviews

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

• 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
• 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
• 【Horse Power】: Boost Horse Power up to 350BHP.
• 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
• 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).

EVIL ENERGY 3.0 Inch V Band Clamp for Flange Kit Stainless Steel

• [Size] Fit for EVIL ENERGY 3.0inch Flange..
• [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange..
• [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..

maXpeedingrods Universal Street Performance GT35 GT3582 Turbo for 2.5L-6.0L Engine T3 AR.70 Anti-Surge Compressor Turbo Charger Bearing 600+HP Water + Oil cooled Billet Compressor Wheel

• 【Applicaiton】: Perfect for all 4/6 cylinder 2.5L-6.0L engine. Boost Horse Power up to 600HP..
• 【Specifications】: Exhaust (Turbo Manifold) Flange: T3 Flange & Exhaust (Downpipe) Flange: 4 Bolts. Cooling Type: Water + Oil cooled.
• 【Billet Compressor Wheel】: Forged full-machined billet aluminum compressor wheels with a larger horsepower range and better boost response.
• 【Upgrade High Quality Material】:1. "100% balancing Test" by TURBOTECHNICS VSR3. 2. Turbine housing ：Silicon-Molybdenum - temperature resistant....
• 【NOTE THAT】: Please lubricate the turbo bearing fully before installing, TO ADVOID SHAFT PLAY AND DAMAGE IF INSUFFICIENT OIL SUPPLY. Professional....

JDMSPEED New Stainless Steel Exhaust Manifold & Gasket Kit Replacement For Grand Cherokee Wrangler 4.0L Replacement For Jeeps Select 1991-1999 4.0L Engine Only Replaces 33007072 4883385

• Pipes Have Been Upgraded To Stainless Steel.
• Flex Joints & Flange Still Made Of Standard Steel For Natural Thermal Expansion/Contraction.
• Package Include: 1 x Exhaust Manifold, all necessary gaskets and downpipe hardware.
• Included heat shield, Includes flex bellows.
• Replace Part Number: 33007072, 4883385, 674-196, 10105812.
• Replacement For Jeep Cherokee L6 4.0L 1991-1999.
• Replacement For Jeep Comanche (MJ) L6 4.0L 1991-1992.
• Replacement For Jeep Grand Cherokee L6 4.0L....
• Direct replacement, exact-fit kit replaces the vehicle's factory installed exhaust manifold.

aqxreight – 5 Bolt to 2.5″ V Band Turbo Outlet Downpipe Flange Adapter Stainless Steel fit for forester XT Models 2004-2008

• Scope of Application: Fit for forester XT Models 2004-2008, fit for Impreza WRX Models NON STi 2002-2007, fit for WRX Impreza WRX Models NON STi 2002-2007, fit for Baja Turbocharged Models 2004-2006, fit for Saab 9-2X 2.0L Aero DOHC Turbochaged Models 2005, and fit for Saab 9-2X 2.5L Aero DOHC Turbochaged Models 2006..
• Uses: Fits for turbos with TD04/05 bolt housings including TD04 turbo charger. Converts a standard TD04 5 Bolt turbine housing downpipe discharge to a 2.5in V band exit..
• Material: Durable stainless steel construction provide superior protection perfect for harsh environment. High hardness and not easy to deform..
• User Friendly Installation: Allowing 2.5in(63mm) flanged downpipe to bolt/clamp directly to it. Outer 5 holes are used to bolt the flange to the back of the exhaust housing then converts the turbo discharge to a 2.5in(63.5mm)..
• Wonderful Accessory: Superior workmanship, focus on bringing a good user experience. Please check the pictures carefully before buying to avoid wrong purchase..

Enrilior Subaru Downpipe 5 Bolt to v Band,TD04 5 Bolt Turbo Downpipe Flange to 3in V-Band Conversion Adaptor Fit Compatible with Subaru WRX 14412AA451

• Made of high quality stainless steel material, high strength and toughness..
• It has strong impact resistance and scratch resistance, and has both moisture and corrosion resistance..
• This adapter flange converts the standard TD04 5 bolt turbine casing downpipe to a 3in V-band..
• The outer 5 holes are used to bolt the flange and then convert the turbocharger exhaust to 3in..
• Good sealing, which can eliminate leakage caused by poor welded joints..

TD04 TD05 VF40 VF46 VF39 VF52 EJ20 EJ25 Turbo Gasket Kit For Subaru 2.0L 2.5L

• Turbocharger Exhaust Manifold Downpipe Gasket for Subaru WRX TD04 TD05 VF Series.
• All original gaskets materials uesd the best meterial.
• No instructions included, professional install recommended.
• Application : TD04 TD05 and VF series turbos with a 3 bolt flange.

Mounting Bungs and Plugs Stainless Steel M18 x 1.5 Thread Notched Style Exhaust Weld in Bung with Gaskets 2 Sets

• The mounting bung is made of stainless steel, easy to weld on exhaust, headers, down pipes, etc..
• Install the weld bungs to replace or add sensor ports to any OEM or aftermarket exhaust or downpipe. Drill a hole and weld the mounting bung on..
• The bung cap can be used to seal sensor bungs that are not being used in the exhaust system. The gasket helps create a tight seal to prevent any....
• The M18*1.5 bung features a notched style, making it easy to weld by having the curve sit against the rounded surface of the exhaust or downpipe..
• The weld in bung and plug set features a straight thread size of M18*1.5 mm, which is suitable for most vehicles..

Rev9Power TX-66-62-T4D-3V-70 ANTI-Surge Racing Series TX-66-62 Turbocharger 70 A/R T4 Divided flange / 3 inch V- band exhaust 600HP + Oil Cooled / Journal Bearing Turbo Charger Rev9

• Compressor inlet : 4.00" / Compressor outlet 2.50".

RHF48 VF39 VF52 VF43 Turbocharger for Subaru Impreza WRX 2009-2014 / Legacy GT 2.5L 2005-2009 Turbo Charger

• Fit for Subaru Forester 2.5XT 2007-2011； for Subaru Impreza WRX 2009-2014.
• Fit for Subaru Legacy 2005-2009 / Outback 2005-2009.
• Turbo Model: RHF55,VF52 Turbo Part Number:14411AA800, 14411AA760, 14411-AA800, 14411-AA760，40-30186 R.
• Turbine Flange Type: for Subaru Flange Type & Downpipe Flange Type: 5 Bolt for Subaru Flange Type.

Mishimoto MMEXH-ADAP-3DSE Exhaust Adapter 3" Downpipe to Stock Exhaust Compatible With Subaru Silver

• Overall Size: 5.24” x 3.94” x 1.54”.
• Smooth exhaust-flow transition between 3" downpipe and stock-sized exhaust.
• Eliminates infamous exhaust leaks caused by mating different exhaust flanges.
• 304 stainless steel adapter will not rust in harsh climates.

Quick Fix Exhaust Flange,Exhaust Flange Spring Bolt Repair Pipe Kit Quick Fix 2.25in ID to 2.25in OD Universal Stainless

• Brilliant Compatibility:Exhaust Flange Spring Bolt Repair Pipe Kit,universal for most vehicles and can repair your car very well and effectively.2.25in ID to 2.25in OD exhaust spring bolt flange, used for connection between pipe ends..
• Stainless Steel Material:Quick Fix 2.25in Exhaust Flange Made of high quality stainless steel material for perfect durability and strength, not easy to deform, has long service life..
• Easy to Use:Exhaust Flex Spring Flange Easy to use with equipped springs and bolts, wonderful replacement for the previous old or broken one.Built to meet standard specification, strictly follow factory quality control..
• Feature:Universal Exhaust Flange,Quick fix flange repair pipeline assembly, which meets strict quality control standards and can be used reliably..
• Standard Specification:Exhaust Spring Bolt Flange Conform to strict quality control standards, dependable to use.Manufactured according to the original specifications..

Kashaipu Exhaust 3" Exhaust Collector Flange Oval 2-Bolts Flanges Manifold Muffler Connect Cat-back 3" Inch ID Pipe (3" inch)