Top Excellent Welding Electrode Holder Reviews

SPRIGHOLLY 300Amp Electrode Holder Copper Plier Electrode Clamp of Welding Machin Stick Rod Suitable for ARC Stick/MMA Welding Machine (300A)

★Electrode Holder can be used for 300A..
★Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode. grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions..
★MATERIALS:Forging brass.PACKAGE:1 electrode holder included..
★Constructed for long life and dependability.
★Suitable for ARC Stick/MMA Welding Machine. Hand Stick welding jobs..

Check Stock

Welding Electrode Holder 400AMP Heavy Duty Holding Welding Plier Fit for ARC Welder Welding Machine Stick Electrode Clamp of Welding Stinger

Welding rod holder Accepts rods up to 5/16''.
Electrode thickness:1/16-5/32(1.6-4.0mm) This Electrode holder is made of High Quality Brass material with Insulated Handle for high conductivity and improved cable connections..
Well-organized grooved jaw for firm grip of rods indifferent positions.Screw type 400A holder.
Well made welding rod holder,Size: 21.5*8*4CM (8.45*3.15*1.55inches).
high temperature/high impact-resistant molded fiberglass fully insulated body to protect against electrical shock and have powerful spring loaded non-slip insulated clamping jaws to hold the electrode tight so it will not slip while welding..
Electrode holder is Made from high quality materials for high conductivity and improved cable connections. Supplied with an allen wrench and cable connection ferrule, assuring efficient connnection and minimizing cable strand breakage at the connection..

Check Stock

Electrode Holder 500 Amp Welding Electrode Holder Set, Heavy Duty Jaw Holding Plier Electrode Clamp for Arc MMA Welder,Black

【High Quality Welding Electrode Holder】The upper and lower clamps of the electrode clamp are made of high copper alloy for maximum conductivity and strength. High quality electrode holder with 500A current capacity, comfortable insulated handle, convenient and easy to operate. Ideal for most arc, MMA, hand welding work.
【Heat-resistant insulation for Safety】The handle is molded from a durable glass-filled nylon material for good heat and impact resistance. Glass-filled nylon handle and clamp insulated for maximum operator protection and safety.
【Groove Jaw Design】The grooved jaw for firm grip of rods in 45°, 90°, 135°, 180° positions. Clamping Device holds the stick electrode tight so it will not slip while welding and transfers the welding current to the stick electrode.
【Welding Chipping Hammer & Wire Scratch Brush】Welding chip hammer is made of high strength and toughness steel. Dual-headed design, one end is flat chisel, the other end is pointed chisel, convenient operation in narrow space.Coil spring handles reduce vibration and improve comfort. The wire brush is made of stainless steel bristles and with wooden handle, they are durable and have a strong cleaning ability..
【Work Great】Which are easy to remove and clean corrosi....

Check Stock

300A 16㎡ Copper Clad Aluminum Cable Dinse 10-25 Connector Plug Welding Leads Assembly Set 9.8ft Welding Electrode Holder and 6.5ft Stick Plier Ground Clamp for ARC Stick MMA Mini Welding Rod Welder

✨ This kind of Welding Electrode Holder is made of Copper Clad Aluminum clamp head and special insulation heat-resistant material. High temperature resistance, non-conductive, suitable for long-term use.
✨ The Welding Ground Clamp is also suitable for stick,tig,mig or cut welding.Features wide grip jaws to ensure a firm connection.Grounds work can be welded to a good electrical ground earth.
✨ 9.8ft long Welding Electrode Holder with cable and 6.5ft long Welding Ground Clamp with cable. 16㎡cable,Dinse 10-25 connector.*-*Please check connector size in the picture and compare with your welder´s Connector/Receptacle to make sure it fits*-*.
✨ This Welding Leads Assembly Set has a strong current(300A).It is not easy to scald with copper forging.Also,the welding electrode rod in the Electrode Holder is not easy to fall off for the high strength Multi-angle occlusion.You will receive a ready to use fully assembled lead, no tools required.
✨ This set of welding accessories have a common advantage: Copper guide, Copper Clad Aluminum wire, stable and durable, thick handle, high-quality upper and lower jaws, not easy to oxidize with heat, strong bite force.

Check Stock

Welding Arc Welding Electrode Holders 300Amp Copper Heavy Duty Jaw Welding Rod Holder Plier Clamp of Welding Machine Materials for Arc MMA/Stick, Black

Great for most Arc, MMA, Hand Stick welding jobs.
Arc welding electrode holders with a comfortable insulated handle and easy to operate..
Used # 1 AWG Gauge Cable,The electrode holder is with highly conductivity and improved cable connections..
High quality electrode holder is with highly conductivity and improved cable connections..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet..

Check Stock

WeldingCity 100-ft 2-AWG USA-made Heavy Duty Welding Cable Highly Flexible Durable EPDM Rubber Jacket 600V -50C-105C Black

...istant to chemicals, oils, and acids and is also weather, ozone and sunlight resistant. Available welding cable sets: welding cable only.
cable set with terminal lugs and cable set with Dinse connectors..
Welding Cable Set With Terminal Lug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp and three zinc-plated copper terminal lugs (1/2" stud hole)..
Welding Cable Set With Dinse Plug includes: 2-AWG USA-made welding cable at selected length, one 300-amp stick electrode holder with accessory kit, one 300-amp ground clamp, one zinc-plated copper terminal lug (1/2" stud hole) and two Dinse-type 35-50mm male connectors..
Heavy duty 300-amp stick electrode holder with strong jaw spring.
both upper and lower jaws made of copper (brass) with increased operator comfort. Zinc-plated steel 300-amp work clamp with strong spring, copper plated jaw, copper braid, copper plated hex screw for secured cable connection. Dinse-type twist-lock cable connector (male) with heat and oil resistant covers and accessories.
1/2" (12.7mm) pin. Accepts cables AWG #2-1/0 (nominal cable area 35-50mm²)..
U.S. based welding and hardware supplier. Strong technical support with experienced customer ....

Check Stock

STINGER Stv002 Electrode Holder Insulated

V Securely Holds Electrode, Ergonomic Comfortable Rubber Handle.
Amperage: 0 - 350, Electrode Capacity: 5 MIL / 3/16", Cable Capacity: 1/0 ga..
Eliminates Arc Burns From Rod "Popping" Out.
Molded Thermoset insulating cover set meeting the requirements of your welding projects.
Most Heavy Duty Welding Electrode Holder on The Market, Made In The USA.

Check Stock

ORRIL 300A American Style Welding Electrode Holder for ARC MMA Welder

1.300Amps Welding Electrode Holder American Style.
2.With 35-50 quick plug. Easy connected..
4.Applicable to use with MMA ARC Welders 120 200 250 Amp, Suit for various kinds of Welding Rods etc..
5. Pack of 1 PC 300A electrode holder with 35-50 quick plug 3M cable.

Check Stock

Goplus 250 AMP MMA Welder ARC Welding Machine 110V/ 220V Soldering Accessories Tools

【Profession Grade ARC Stick Electrode Welder】Detailed treatment makes this welding machine highly efficient and practical. Stick electrode welding machine for MMA welding in alternating current (AC). Perfect welding performance, ideal for welding mild steel and stainless steel..
【2 levels transformer】2 levels of transformer, 110V and 220V. Fit both home and professional use..
【Stable and Durable】Compact construction and exquisite MMA ARC welding machine, made of heavy duty stainless steel body, painted with durable yellow paints, ensure its long-last serving life-span..
【Portable Design】Features 2 easy carrying handle handles and 2 Wheels for easy access and movement during your maintenance tasks, adds extra maneuverability. Can be used anywhere u need..
【Safe with A Lot of Complimentary Necessities】Build-in fan on the machine to help heat dissipation. Features with thermal overload protection to ensure safety. It also comes with a copper electrode holder, a ground clamp, a protection mask and a brush/chipping hammer..

Check Stock

Reboot Welding Electrode Holder 300AMP Copper Heavy Duty Jaw Holding Plier Electrode Clamp of Welding Machine ARC Welder American Design

Large 300Amp welding electrode holder provides durability, 1/4~7/8 inch electrode capacity..
Applicable to use with MMA ARC Welders 200 300 Amp, Suit for various kinds of Stick Welding Rods Electrodes etc..
Electrode holder is made of High Quality Brass material with Insulated Handle. Special Design for Easy Cable Connection with Free Spanner and Spacing Sheet.
100% Customer Satisfaction Guarantee:All products from Reboot have 1 Year's after-sales customers service guarantee.Please contact us for any assistance..

Check Stock

E7018 3/32'' Welding Electrode Rods Carbon Steel Welding Electrode 5Lb for Mild or Low Alloy Steels

Material: The package includes 5LB E7018 3/32'' basic carbon steel electrode.
Standard: AWS A5.1 E7018 ISO2560-A E42 3 B 1 2 GB/T5117 E5018.
Advantage: The E7018 Stick welding rod is a multi-purpose electrode with excellent handling properties. 7018 Arc welding rod performs particularly well when welding mild or low alloy steels such as bridges, construction, shipbuilding and pressure vessel fabrication, to name a few. E7018 Stick electrode can also be used in construction and maintenance of a series of construction machinery such as bulldozers, agricultural or mining equipment.
Application：E7018 carbon steel electrode Used to weld the Marine steels (A、B、D、E、AH36、DH36、EH36）and the same grade strength low carbon steel, mechanical performance , impact value can be as high as 150J @ -30 ℃. AC & DC.
Service: Fox Alloy Time-proven formulation.
A team of experienced welding engineers ready to answer all your welding questions.

Check Stock

Stick Electrode, 1/8 in. dia., 10 lb.

200 AMP Electrode Holder – The comfortable, lightweight electrode holder is rated for 200 amps of current at a 20% duty cycle..
12.5 FT Cable Length - The assembly features a flexible copper welding cable which is 12.5 FT in length..
Twist-Mate / Dinse Connector – The assembly features twist-mate / dinse connector is which is compatible with the Power MIG / Weld-Pak 140, Power MIG 180, Power MIG 210mp, SquareWave TIG 200 and many other Lincoln or competitor power sources..
TRUSTED BY PROFESSIONALS – This electrode holder assembly is used by professional fabricators on a daily basis..
For use with 3/32, 1/8 or 5/32 Stick (SMAW) electrodes..

Check Stock

E6013 - General Purpose/Mild Steel - Welding Electrode/Rod - 14" x 1/8" (PACK: 44 LB)

All-position, mild steel electrode for welding light to medium-gauge steel. Common uses include tack welding on thin sheet metal such as galvanized sheets, automobile bodies, metal furniture, window frames, fences, storage tanks, farm equipment and iron grills.
Excellent operating characteristics when using small diameter electrodes to weld thin sheet metal using lower open-circuit AC voltage.
One of the easiest electrodes to use because of its easy slag control in vertical down welding, its wide operating range and restrike capabilities.
This electrode has a soft, steady and quiet arc that produces very little smoke or spatter.
Select your Electrode Diameter and Package Quantity from the Options - Check Picture #3 for Welding Parameters..

Check Stock