Top Eotech Pistol Red Dot Reviews

Ade Advanced Optics Ruger 10/22 Red-Dot Sight Mount Fit Vortex Venom Docter Burris Fastfire Optics

  • This red dot sight fit ADE model RD3-006, RD3-009, RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium) red dot sights..
  • Also fit Doctor, Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech mrds, , Insight red dots..
  • This adapter mount is designed to connect red dot optic sights to 10/22..
  • Aircraft grade Aluminum in Matte black finish..
  • Mounting hardware comes with screws and allen wrench..
Check Stock

Ade Advanced Optics Optics Delrin Shims 1.0 Degree for Vortex Venom & Viper Burris Fastfire II III,Red dot Sight

  • Optic Shim is made to fit between the red dot and the mounting plate. Depending on the handgun, some handguns need THIS 1degree shim to give extra....
  • Do not return your "defective" red dot that can't adjust the illuminated dot high enough to zero. This optic shim solves the problem by raising the....
  • Fits: Vortex Venom & Viper, Burris Fastfire II, III, Docter Red Dot Sight, Insight, Eotech MRDS, Sightmark minishot, Meopta. All trademarks mentioned....
  • Also Fits: Ade Advanced Optics RD3-006, RD3-009, RD3-011, RD3-012, RD3-013, RD3-015. The center two screw holes might be 1 or 2mm off for some red....
  • What it does? While zeroing the red dot sight, some users turned the elevation screw all the way to the end that can no longer turn(screw maxed-out),....
Check Stock

Grim Tales 17: Guest From The Future – Find Hidden Objects Mystery Puzzle Game

  • EOTECH EXPS2-0GRN – Holographic Weapon Sight in black with GREEN reticle (68MOA ring & 1 MOA dot).
  • Green Reticle – 6x easier to see than red during daytime operation.
  • Side Button Operation – Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
  • Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

EOTECH EXPS2 Holographic Weapon Sight, Matte Black, Dimensions: 3.8' x 2.9' x 2.2'

  • EOTECH EXPS2-0GRN – Holographic Weapon Sight in black with GREEN reticle (68MOA ring & 1 MOA dot).
  • Green Reticle – 6x easier to see than red during daytime operation.
  • Side Button Operation – Compact design and side button operation consumes minimal rail space and is ideal for use with a G33 Magnifier.
  • Mount – Quick Detach lever fits 1″ Weaver and MIL-STD 1913 Rails.
  • EOTECH HWS Prestige Warranty – Comes with 10 year limited warranty.
Check Stock

Ade Advanced Optics RD3-023 Valkyrie 4 MOA Green Dot Sight for Optics Ready Pistol That is Compatible with RMR fooprint Optics Such as Holosun HS407C/HS507C/HS507T and Riton X3 Tactix PRD.…

  • ADE RD3-023 Valkyrie is a 4 MOA GREEN dot designed to fit any pistol with a PISTOL that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots. The Valkyrie fits all pistol with optic cuts for Trijicon RMR/SRO, including aftermarket slide such as Rockslides, Polymer80 that has a optic cut for Trijicon RMR/SRO..
  • The Valkyrie Gen 2 also fits name brand pistol manufacturer made Optics Ready pistols, such as Glock MOS, S&W M&P 2.0 OP, IWI Masada, Smith Wesson MP C.O.R.E, CZ P10F/10C optics ready, Walther Q5 Match and Springfield XD/XDM/XDS OSP, Canik TP9 SFX/Combat, FN 509/45 Tactical, Shadow Systems MR 920 using pistol manufacturer provided plate marked for Trijicon RMR footprint..
  • Those name brand pistol manufacturer made "Optics Ready" handguns all come with several mounting plates/optic cuts marked for different brands of red dots, such as for Trijicon RMR, Shield RMS and Vortex Venom red dot footprint. The Valkyrie fits one of the pistol manufacturer provided plate marked that is compatible with Trijicon RMR..
  • ADE Valkyrie created a iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a "back up iron sight" to give enough distance to be a Co-Witness back up sig....
Check Stock

Ade Advanced Optics Absolute Cowitness Co-Witness Riser HIGH Mount - Compatible with Trijicon RMR/SRO Swampox Kingslayer/Liberty/Justice Red Dot Sight

  • Precision CNC Machined from Aircraft Grade Aluminum with Weight Reducing Trapezoid Cuts.
  • This is an riser Optic Mount to attach to the red dot sights to lift the red dot higher to absolute level..
  • Compatible with Trijicon RMR type foot footprint/screw pattern/mount holes, there are a few red dot sight sharing this footprints, including ADE....
  • Finished in a Matte Black Anodize. Comes with installation screws and allen wrench..
  • Does NOT work with ADE RD3 series, Doctor, Burris Fastfire, Vortex Venom/Razor/Viper, Meopta, Insight, Shield RMS/RMSc,Eotech MRDS, Sightmark Mini....
Check Stock

ADE Zantitium RD3-015 Red Dot Sight + Rear Sight Optic Mounting Plate/Adapter for All Glock (Non-MOS,Non-Aftermarket Slide) Standard, Canik TP9SF and Taurus GX4/G3C/G3 with Factory Steel Sight Pistol

  • ...ions. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a CR2032 Battery(Included).Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

ADE Bertrillium RD3-013 Red Dot+Rear Sight Optic Mounting Plate/Adapter for All GLOCK (Non-MOS,Non-Aftermarket Slide) Standard models,Canik TP9SF and Taurus GX4,G3C&G3 with factory steel sights pistol

  • ...battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included)Ade Advanced Optics model RD3-006, RD3-009, RD3-012, RD3-013, RD3-015 are designed to fit the slide/footprint of mounting plate made for Vortex Venom, Burris Fastfire, Meopta, Docter, Insight, Eotech MRDS, Sightmark Minishot. Therefore Ade red dots are compatible for varieties of handguns with appropriate plate that is made for any of those brands..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery and re-sight in to waste ammo..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same B rightness level last time it was turned off. The lowest setting is invisible by human Eye that is for using with a night vision.
Check Stock

SAMTEC Mounting Plate for G17 19 22 23 26 27 34 Mount Pistol Sight Mount Base Fits Vortex Venom, Vortex Viper, Burris Sightmark Mini Reflex Sight - 1.81X1in

  • Easy to install -- Replace the rear sight slot with mini red dot base plate (Caution: NOT fits for RMR, RMS, DOCTOR.)Size: 1.81X1in.
  • Pistol mount plate fits G17 19 22 23 26 27 31 34 35..
  • Suitable Mini Red Dot Sight -- Fits Vortex Viper/Venom micro red dot sight, designed for rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Special Pistol Mount -- Fits Burris Fastfire micro red dot sight (Notes: the screws included are not long enough for some Burris red dot, pls use the screws in the red dot.).
  • Highest Quality Material -- Full metal, heavy duty, made of 6061 T6 aluminum alloy in durable black matte finish..
Check Stock

Outerimpact Red Dot Adapter Mount for Sig Sauer P365 …

  • Compatible Guns: P365. DOES NOT WORK WITH P365XL.
  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1275.
  • Dimensions: Length:  2.15″ Width: 1.06″ Height: 0.21".
Check Stock

Ade Advanced Optics Red Dot Adapter Mounting Plate/Base/Convertor for Vortex Venom/Razor/Viper Burris Fastfire,Meopta,Docter Insight to FIT Sig Sauer P365XL / P365X Handgun

  • The existing optic cut on Sig P365XL and P365X only fits Shield RMS and ADE RD3-018 SPIKE footprint red dot, the existing optic cut does not allow red....
  • This Plate does NOT fit base/standard Sig P365 which does not has a optic cut. This plate does NOT fit red dot footprint such as trijicon rmr, shield....
  • Fit Ade RD3-006A(Huracan), RD3-006B(Python), RD3-009(Crusader), RD3-012(Delta), RD3-013(Bertrillium), RD3-015(Zantitium)Red dots..
  • Also Fit Vortex Venom/Razor/Viper, Burris Fastfire, Meopta, Eotech MRDS, Docter, Insight, Sightmark Minishot and similar red dots. It does NOT fit the....
  • Machined from aircraft grade aluminum with hard anodizing finish. Comes with screws and hardware for installation. We highly recommend DIY only if....
Check Stock

Ade Advanced Optics RD3-020 Raptor Red Dot Sight for RMR Footprint/Mounting Plate/Slide/Plate Optics Ready Pistol - 6MOA…

  • Ade RD3-020 Rapter is a 2 MOA Red Dot designed to fit any pistol mounting plate/slide/cut that is compatible with RMR/SRO, Holosun 407C/507C/508T footprint red dots.
  • The Raptor has Motion-On/Wake-Sleep technology. While Raptor is turned on, the red dot illumination goes to sleep after five minutes of inactivity, but when any motion or vibration is detected, it instantly switches on illumination at the previous brightness setting..
  • Dimension 1.47x1x1.1 inches. Weight 1.06 oz. Shockproof/Fogproof/RainProof..
  • Operates with a single CR2032 battery(included). Battery life is up to 50000 on low and 500 on brightest setting. You hold + and - for 2 sec to turn on, and hold both + and - to turn off. Since it has a motion sensor to go to sleep, users do not really need to power it off. When the unit is powered off, the motion sensor is turned off too. 1-10 levels of brightness intensity..
  • 2 MOA Red Dot. Comes with a picatinny mounting plate and a pair of screws. This red dot does NOT comes with any other optic plate to mount on an specific pistol.
Check Stock

Outerimpact Red Dot Adapter Mount Compatible with Smith & Wesson SD9VE and SD40VE

  • Compatible Red Dot Sights (Mounting Screws INCLUDED): Trijicon RMR, Doctor, Insight MRDS, Eotech MRDS, Leupold Delta Point, Leupold Delta Point Pro, Vortex Razor, Vortex Viper, Vortex Venom, Burris Fast Fire 2 & 3, CMORE RTS & STS, Sig Romeo 3, UTG Reflex Micro Dot, Shield RMS (additional screw purchase required), Holosun 407/507c, Kahles Helia, Springfield Hex Dragonfly, Bushnell RXS 100 and 250, Crimson Trace CTS 1252.
  • Compatible Guns: S&W SD9VE and S&W SD40VE.
  • Dimensions: Length: 2.02' Width: 1.0' Thickness: 0.13'.
Check Stock