Top Engine Oil Pressure Sensor Replacement Reviews

Oil Pressure Switch Filter Fit for Chevy GMC Cadillac Buick Pontiac Engine Valve Lifter Oil Filter Suitable for AFM Fuel Supply Assembly

  • This part is made from quality materials to ensure reliable performance and long service life. This engine oil pressure sensor filter is designed to....
  • Reliable replacement for an original part that has failed due to clogging.This engine oil pressure sensor filter is designed to match the fit and....
  • The primary purpose of this filter is to clean oil that flows into the AFM lifters. Putting it on the AFM oil supply assembly can also protect the oil....
  • Always replace your oil and main engine oil filter when you change this filter. Please check this AFM filter at each oil change until you understand....
  • Getting to the filter housing was a bit of a challenge, but once you got the old filter out, you could see why the truck was running so rough. After....
Check Stock

ACDelco GM Original Equipment 580-1091 Rear Air Lift Shock Absorber Kit

  • OPS REPLACEMENT OEM NUMBER: 12556117, 12559780, 12562230, 12569323, 12573107, 12614969, 12616646, 12677836, 8125622300, 8125731070, 8126166460,....
  • OPS COMPATIBILITY: Compatible with Chevy 2007-2008 Avalanche.
  • OPS INSPECTION: All engine oil pressure sending units are 100% tested using automated equipment, which activates the switch, checks for leaks and....
  • OPS FIX PROBLEM: Accurately measure the oil pressure value to turn off the low oil pressure warning light to protect the engine.
  • OPS WARRANTY: 1 Year. This oil pressure sensor sending unit really WORKS! Just in case you ever have an issue with it, our Customer Support team will....
Check Stock

Compatible with 12677836 Oil Pressure Sensor Switch D1846A Replacement for Equipment 12616646,12573107, 12562230,12614969, 12569323, 12562230, 12556117, 12559780,8125622300, 8125731070,

  • The main job of an engine oil pressure sensor / switch is to keep track of the oil pressure in the vehicle and then transmit this information straight to the combination meter or the instrument panel. If the vehicle has an electronic control module, then the oil pressure sensor will send this information to the module where it can be calculated.
  • Oil Pressure Sensor Replaces OEM #: 12616646,D1846A,12556117,12559780,12569323,12573107, 12614969.
  • Oil pressure sensor fits for 2003-2008 GMC Envoy, 2004-2007 Cadillac CTS, 2003-2008 Cadillac Escalade, 2003-2008 Chevrolet Avalanche , 1997-2008 Chevrolet Corvette, 2003-2008 Hummer H2 , 2008-2009 Pontiac G8. Please find more compatiblity in the product information.
  • Manufactured from high-quality materials for durability, meets or exceeds OEM standards, and 100% tested before shipping.
  • Direct replacement for a proper fit and easy installation, check youtube video if you have installation problem..
Check Stock

Xtensi Engine Oil Cooler and Oil Filter Housing Adapter Assembly Compatible With 2011-2013 Jeep, Chrysler 200/300,Dodge Journey Charger Caravan 3.6L Aluminium, Replaces 5184294AE

  • Oil Filter Housing Adapter is not a genuine part, it is a direct replacement and will fit, work and look exactly like the factory part. Replace Part Number: 5184294AE. Please check the part number before purchase..
  • Only for 3.6L 6 cyl engine. Compatible with 6 cyl 3.6L engine 2011-2013 Chrysler 200, 2011-2013 Chrysler 300 V6 3.6L, 2011-2013 Chrysler Town and Country V6 3.6L, 2011-2013 Avenger V6 3.6L, 2011-2013 Challenger V6 3.6L, 2011-2013 Charger V6 3.6L, 2011-2013 Journey V6 3.6L, 2011-2013 Caravan V6 3.6L, 2011-2013 Durango V6 3.6L, 2011-2013 Grand Cherokee V6 3.6L, 2012-2013 Wrangler V6 3.6L, 2013 Ram 1500 V6 3.6L, 2012-2013 Ram C/V Base V6 3.6L..
  • Advantage: Keep the engine oil clean and cool. This replacement oil cooler housing comes with a new pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean. Beside that, it also cool down the oil that enters the engine. Direct replacement. Fluorocarbon and HNBR sealing rings are resistant to oil, abrasion and temperature..
  • The oil cooler is made of lightweight aluminum alloy, has 16-plate (8 plate thick and 8 plate thin), can be better cooling. Oil filter housing adapter oil cooler kit comes with a complete set of ....
Check Stock

ICP Sensor with Harness Kit, Injection Control Pressure, Compatible with Ford Vehicles - 7.3 Powerstroke E350, F250, F-350 Super Duty - Replaces F6TZ-9F838-A, F4TZ9F838A, 1807329C92, CM5227

  • Replacement Injection Control Pressure Sensor - The ICP sensor or Injection control pressure sensor is found on 's Powerstroke 7.3 L diesel engines. The ICP sensor is responsible for monitoring oil pressure being passed on to the PCM to pressurized fuel injectors using the IPR (Injection Pressure Regulator) for proper vehicle operation..
  • Compatible Replacement for Ford Vehicles With 7.3L Powerstroke Engines - 2003 E-350 Club Wagon | 1995 - 1998 E-350 Econoline | 1995 - 2002 E-350 Econoline Club Wagon | 2000 - 2003 Excursion | 1994 - 1996 F-250 | 1999 - 2003 F-250 Super Duty | 1994 - 1997 F-350 | 1999 - 2003 F-350 Super Duty |. The ICP sensor can easily be located inside the engine bay behind the alternator..
  • Replaces Part# 1807329C92, ICP102, F4TZ-9F838-A, F6TZ-9F838-A, CM5227. This ICP sensor found on 's 7.3L Powerstroke engines are popular for having oil leaks. If you are experiencing oil coming out of the ICP Sensor's electrical connector, weird noises on idle during first starts, hesitation or misfires then you may have a problem with your ICP sensor..
  • OEM Fit, Quality, Finish - While this is NOT a g....
Check Stock

12677836 OPS172 Engine Oil Pressure Switch & Sender Unit Compatible with 12573107 12556117 12559780 12562230 12569323 12614969 12616646 8125622300 8125731070 8126166460 1S6713 PS308 2OPS0031

  • 【COMPATIBLE VEHICLES NOTE】★★★Buy it with your confidence! ★★please check the description or use the year/make/model drop down bar and....
  • 【QUALITY & FEATURES】★★In manufacturing, we utilize a laser etching system to calibrate thick film printed circuits. This provides for high....
  • 【EASY INSTALLATION】.★★★All engine oil pressure sensor units are 100% tested using automated equipment that activates the switch, checks for....
  • 【REPLACES PART & MODEL】 Replaces#....
  • 【NOTE】★★If the Engine Oil Pressure Sensor Switch fails simply contact us for a replacement or refund. Please contact us first for any....
Check Stock

Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Compatible With 2011-2013 Chrysler 200/300,Dodge Journey Charger Caravan And More,Replaces 5184294AE

  • 【Replacement part number】- 5184294AE, 5184294AD, 5184294AC . Before ordering, please confirm whether the accessories are suitable for your vehicle to confirm compatibility！.
  • 【FIT FOR】 -2011-2013 Chrysler 200, 2011-2013 Chrysler 300, 2011-2013 Chrysler Town and Country, 2011-2013 Dodge Avenger, 2011-2013 Dodge Challenger, 2011-2013 Dodge Charger, 2011-2013 Dodge Journey, 2011-2013 Dodge Caravan, 2011-2013 Dodge Durango, 2013 Ram 1500, 2012-2013 Ram C/V Base. （ Only for 3.6L 6 cyl engine）！.
  • 【Advantage】- Oil filter housing adapter assembly comes with a complete set of accessories required for installation , And comes with pre-installed oil filter, fluid temperature sensor, oil pressure sensor, Bypass Valve & Spring and NBR sealing ring. also comes With 12 pieces of Intake Manifold Plenum Gasket Set for a complete and worry free installation. In addition, one high-quality oil filter is given as a gift, so that you can use it next time you change the oil filter..
  • 【High performance】 -The engine oil is filtered through the Oil filter housing adapter assembly, remove foreign particles it also cool down the oil that enters the engine to maintain the clean and efficient operation of the engine! quality materials used, meets or exceeds OEM....
Check Stock

JIFETOR Oil Pressure Tester Kit, Professional Engine Diagnostic Test, 100PSI Pressure Gauge Tool with Hose Adapter for Truck Car ATV

  • OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine oil pressure tester kit is used for measuring oil pressure on lubrication system quickly and accurately. The gauge readings assist to diagnose if there are following problems: blocking oil strainer or oil filter, broken pressure-limiting valve spring, poorly working oil pump, low/high oil viscosity, blocking lubrication oil channel, blocking oil filter core and by-pass valve is difficult to open etc..
  • FITMENT TYPE: The oil pressure test tool includes 3 sizes (1/8" NPT, 1/4" NPT, 3/8" NPT) selectable brass adapters, can be connected to the corresponding sizes oil pressure test service port, on most gasoline or small diesel engine, includes car, motorcycle, ATV, truck and so on, which oil pressure not exceeds 100psi..
  • PRESSURE GAUGE AND HOSE: Pressure gauge adopts rubber cover protected 3" large dial. 0-100psi and 0-7bar small scale range with big dial, very easy to read. No pressure holding function, return to zero automatically. The 30" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter, can be connected to 1/4" NPT and 3/8" NPT adapters directly. Max working pressure: 300psi.
  • EASY TO OPERATE: When you want to test the oil pressure by this engine oil pressure diagnostic gauge, disasse....
Check Stock

Aluminum Oil Cooler Oil Filter Housing | Replacement for 3.6L 2011-2016 Dodge Journey Grand Caravan Jeep Wrangler Chrysler 200 300 Ram ProMaster & More | Replaces# 926-876, 5184294AE, 68105583AF

  • ... 【PREMIUM QUALITY】Long life-span matters, that is why our 3.6 oil filter housing comes with high-grade filter medium, die-cast aluminum housing, OE standard coolant temperature sensor and precision manufactured oil pressure switch for you to put an end to oil leaks.
  • 【REPLACEMENT FOR】2011-2016 Chrysler 200 300 Town & Country | 2011-2016 Dodge Challenger Charger Journey, 11-15 Durango, 11-13 Caravan, 14-16 Grand Caravan, 11-14 Avenger | 2011-2016 Jeep Wrangler, 14-16 Cherokee 3.2L, 11-15 Grand Cherokee | 13-16 Ram ProMaster.
  • 【REPLACE OE NUMBER】926-876, 5184294AE, 68105583AF, MS97204. The oil filter adapter has undergone extensive testing, means you will get a fairly reliable oil cooler housing to perform excellently under all operating conditions.
  • 【24-MONTH WARRANTY】If for any reason at all, you are not fully satisfied with the 3.6 engine oil cooler adapter, simply contact us through amazon message to apply the service of carefree REPLACEMENT or REFUND.
Check Stock

Jobs USA Search

  • ...with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing treatment which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In order to avoid improper installation of the product ca....
Check Stock

WATERWICH Oil Pressure Gauge Kit 0-100 PSI Press Gauge Meter Includes Electronic Sensor 2inches 52mm Universal for 4 6 8 Cylinder Car Truck Vehicle Automotive

  • 1.Easily display at night:Our Oil Pressure Gauge is highly visible with a WHITE Light,Easy viewing at all angles during any lighting conditions,2-1/16" (52mm) Diameter with Black Dial, Illuminated Red Needle & black face gauge..
  • 2.Read Range:Our Gauge will precisely monitor the oil pressure level within your engine that is in the range of 0-100Psi,LED displays provide precise reference to critical operating conditions and alert driver of potentially damaging operating conditions..
  • 3.Easy installation:Our Oil Press Gauge includes electric wire with necessary mounting and installation hardware,no need other sensor,Come with the sensor can fit it well..
  • 4.WATERWICH Press Gauge Meter Reads Vehicle's PSI from 0 to 100 - For 4, 6, and 8 Cylinder Gas Powered Engines..
  • 5.DC12V compatible, Universal for 4, 6, and 8 Cylinder Engines Car, Truck, ATV, RV Vehicle Automotive etc. Suitable for all kinds of Oil Pressure Gauge, and display the Oil Pressure of the engine,All gauges are brand new, complete in box..
Check Stock

Cool Your Engines (Original Mix)

  • ...with a new high quality pre-installed oil filter, it allows the engine oil to be strained through the filter and remove foreign particles to keep your engine running clean..
  • 【High-quality Sensors】Our sensors are oil temperature sensors, fluid temperature sensor and oil pressure sensors that meet professional specifications. Using professional ultrasonic welding technology, as well as the sensor threads have been made thread adhesive sealing treatment which helps prevent fluid leaks and overheating, meanwhile protecting the engine from possible costly damage and prolonging its life..
  • ✅【Premium Material】Oil cooler housing assembly is made in high density virgin plastic, which has been subjected to precise temperature cycle testing and vibration durability testing for very high wear resistance and corrosion resistance.
  • Fluorocarbon and HNBR sealing rings, can be used for oil and high temperature resistance..
  • 【After-sales Service】Our product includes oil cooler kit :12 silicone gaskets (6 down-intake pressurized gaskets and 6 up-intake pressurized gaskets). In order to avoid improper installation of the product ca....
Check Stock

ONER Engine Oil Cooler and Oil Filter Housing Adapter Assembly,Fit for 2014-2017 Chrysler 200/300 Dodge Jeep Ram 3.6L V6 Engine,Replaces# 68105583AA, 68105583AC, 68105583AD, 68105583A，68105583AF

  • 1.【Replacement part number】-68105583AF, 68105583AA, 68105583AB, 68105583AC, 68105583AD, 68105583A . Before ordering, please confirm whether the accessories are suitable for your vehicle to confirm compatibility！.
  • 2【FIT FOR】 -2014-2017 Chrysler 200 2014-2017 Chrysler 300 2014-2016 Chrysler Town & Country 2014 Dodge Avenger 2014-2018 Dodge Challenger 2014-2017 Dodge Charger 2014-2015 Dodge Durango 2014-2017 Dodge Grand Caravan 2014-2017 Dodge Journey 2014-2017 Jeep Cherokee 2014-2015 Jeep Grand Cherokee 2014-2018 Jeep Wrangler 2018 Jeep Wrangler JK 2014-2018 Ram 1500 2014-2015 Ram C/V 2014-2018 Ram ProMaster 1500 2014-2018 Ram ProMaster 2500 2014-2018 Ram ProMaster 3500 (Only for 3.6L 6 cyl).
  • 3【Advantage】- Oil filter housing adapter assembly comes with a complete set of accessories required for installation , And comes with pre-installed oil filter, fluid temperature sensor, oil pressure sensor, Bypass Valve & Spring and NBR sealing ring. also comes With 12 pieces of Intake Manifold Plenum Gasket Set for a complete and worry free installation..
  • 【High performance】 -The engine oil is filtered through t....
Check Stock